3-13S 120A High Voltage Brushed Motor ESC Forward Backward Speed Contoller for RC Boat Car Truck Tank Crawler
▷ Description
- - This ESC is widely applied to RC tank, RC car, RC crawler, RC truck, RC Boat.
- Works in forward/backward.
- Support wide voltage and high voltage input, it is up to 55V.
- Automatically to find the neutral point,default throttle range 1050μs~1950μs,suitable for most of standard Radio Controller.
Please note:
UBEC is a switching-Mode regulators, Please don`t use two ESC in parallel to power the receiver, otherwise they will be burned.the correct method is to disconnect the positive line of one ESC.and if the receiver is powered by other module,please disconnect positive line of this ESC.
How to brake:
The throttle stick move back over the neutral point a little bit, the motor braked to a stop. When the motor is forward rotation, pull back the throttle, motor reverses immediately.
Throttle Range Setting(Throttle Range Calibration):
Move the throttle stick to the full throttle position,and then connect the battery pack to the ESC, after 2 seconds, the indicator light flash twice, that means the full throttle position has been confirmed.After the full throttle position was confirmed, you must release the throttle stick to the neutral position immediately, the indicator light flash three times,that means the neutral position has been confirmed.
How to use:
1, Connect with receiver,motor,battery correctly.
2, Turn on the power of ESC, The LED flashes once.
3, Push the throttle stick to the neutral point,Turn on the transmitter, and adjust the throttle stick/trim until the LED flashes once.that means the neutral position has been confirmed.
LED Indicate:
1, Power on, Power LED will be light on
2, Status LED flash fast-- Signal lost
▷ Specification & Features
- - Working Voltage: 10V-55V(lithium battery 3s-13s)
- Continuous Current: forward 120A, Backward 120A
- UBEC: 5V/0.5A
- Weight: 285g
- Dimensions: 12.3cm x 7.0cm x 3.2cm
- Connectors: XT90
▷ Item Contains
- 1 piece of 3-13S 120A Brushed ESC for RC Model
Easy to use, without manual