4G LTE Cat-1 GNSS USB HUB Board HAT für RPI Raspberry Pi Zero 2 W 3B Plus 4 B 5

PACKAGE CONTENT:(  NOT include Raspberry Pi board.)

​

  1. SIM7670G Cat-1/GNSS HAT x1

  2. USB-A to USB-C cable x1

  3. GPS Antenna x1

  4. LTE Antenna x1

  5. 2×20PIN female pinheader x1

  6. USB 3.0 Adapter x1

  7. USB 2.0 Adapter x1

  8. Screws pack x1

WIKI:      waveshare.com/wiki/SIM7670G_Cat-1/GNSS_HAT

​

SIM7670G LTE Cat-1/GNSS HAT For Raspberry Pi

Global Band LTE 4G Cat-1 Support, GNSS Positioning, 3x USB 2.0 Extended Ports

Features At A Glance

The SIM7670G LTE Cat-1/GNSS HAT is an LTE Cat-1 module, supports wireless communication modes including LTE-TDD, LTE-FDD, with up to 10Mbps downlink rate and 5Mbps uplink rate. Supports Windows/Linux operating systems and multiple network protocols. The module size is the same as SIM7000/SIM7070/A7670E series, and the AT commands are mostly compatible with SIM800 series. It is suitable for IoT applications like remote information processing, monitoring devices, industrial routers, remote diagnosis, satellite positioning, and so on.

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards

  • Supports protocols including TCP/IP, HTTP(s), MQTT(s), FTP(s), and SSL

  • Supports RNDIS, NDIS and ECM dial-up

  • Supports GPS, GLONASS, Galileo, BeiDou positioning

  • Onboard USB Type-A and Type-C interfaces, for testing AT Commands, network communication, and so on

  • Extended 3x USB 2.0 Type-A ports for the host devices such as Raspberry Pi, Windows PC

  • Reserved control pads of the SIM7670G module such as UART and USB pins, make it easy to connect with other host boards

  • SIM card slot, supports 1.8V/3V SIM card

  • 6x LED indicators, easy to monitor the module operating status and USB connecting status

  • Wiki English manual (examples for Raspberry Pi/Jetson Nano/STM32)

Specifications

COMMUNICATION PARAMETERS

Frequency band

LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28, B66 ​LTE-TDD：B34, B38, B39, B40, B41

Data transmission

≤5Mbps(UL) ​≤10Mbps(DL)

GNSS

GPS, GLONASS, Galileo, BeiDou

OPERATING PARAMETERS

Power supply

5V

Logic level

3.3V

Dimensions

85 × 56.7mm

 

Standard Raspberry Pi 40PIN GPIO

Compatible With Raspberry Pi Series Boards

Connecting With Raspberry Pi 5

 

Connecting With Raspberry Pi 4B

 

Connecting With CM4 IO Base Board

NOT include Raspberry Pi board.

* for reference only, please refer to the Package Content for detailed part list

 
Global Multi Band Support Of LTE Cat-1

LTE Cat-1: Up To 5Mbps (Uplink) / Up To 10Mbps (Downlink)

​
Dial-Up On Windows/Linux

Supports Connecting To Windows PC, Raspberry Pi, Or Other Linux Industrial Devices Via USB Interface For LTE Cat-1 Networking And Extending USB Ports.

GNSS Positioning

Supports GPS, GLONASS, Galileo, BeiDou Positioning

 

What's On Board

  1. SIM7670G module

  2. Raspberry Pi 40PIN GPIO header

  3. DIP switches ​for switching to connect the UART and power ON/OFF control of the module to the Raspberry Pi GPIO; ​switches to BOOT for entering the burning mode

  4. USB Type-A interface ​for connecting to USB port of the host such as Raspberry Pi for 4G communication, power supply, and extending USB ports

  5. 3x USB extended ports

  6. PWRKEY

  7. USB Type-C port ​for connecting to USB port of the host such as Raspberry Pi for 4G communication, power supply, and extending USB ports

  8. GNSS IPEX 1 connector

  9. LED indicators

  10. LTE IPEX 1 connector

  11. Nano SIM card slot

  12. 4G UART pads ​compatible with Raspberry Pi 5 3PIN UART connector

  13. Reserved test pads ​for connecting with other host boards

  14. FE1.1S USB 2.0 HUB ​USB HUB chip

 

Pinout Definition
Application Example

Provides Multiple Networking Demos With Waveshare.Cloud, Using The Lightweight MQTT Protocol To Achieve Data Visualization Service

 

Waveshare.Cloud Support

Provides Tutorial And Demo For Quick Start Of Smart IoT Solutions, With Large-Screen Data Visualization Display To Meet Various Application Scenarios

Smart garden solutions: ​The SIM7670G LTE Cat-1/GNSS HAT can report various sensor data of the garden through MQTT to remotely control device ON/OFF, irrigation, fertilization, and so on.

 

Server Performance Cloud Monitoring: ​The SIM7670G LTE Cat-1/GNSS HAT can report various performance parameters of the Raspberry Pi server through MQTT, and monitor the operation status in real-time through the cloud platform.

 

IoT GPS Mobile Positioning: ​The SIM7670G LTE Cat-1/GNSS HAT can regularly report the data of the GPS positioning module through MQTT to realize mobile detection, animal or device positioning and tracking, etc.

Outline Dimensions
 

 

It takes 12-20 working days to arrive most European countries using standard shipping.
Some European island countries, overseas territories and South American countries need to arrive in 25-35 working days.
 
For urgent parcel, you can email us and choose Fedex, DHL, UPS, EMS etc., but you need to pay extra fee.
If you need to use the express delivery service, please contact me via eBay mail.
We absolutely stand behind our products. All of our items will be checked and tested before shipment to ensure 100% performance.
 
We also offer 15 day money back guarantee if you are unsatisfied for any reason whatsoever. We will refund the entire cost of the item not including the shipping and insurance charges. Our aim is 100% customer satisfaction!
 
If you are unclear about product usage, please feel free to contact us. We will offer your detailed instructions for use.
PushAuction