Andrews V4 Grind Cam

Overview of Andrews V4 Grind Cam

Andrews Products was founded in the spring of 1972 and for 30+ years has specialized in making camshafts and transmission gears for the performance motorcycle market. Performance cams designed by Andrews for XL 883, 1100 and 1200 Evolution 86-90 models Cams run up to 6000 rpm with stock hydraulic lifters; for this reason, it is recommended that solids NOT be installed V4 is for stock or modified applications, have a slightly higher idle speed, can be used w/ stock hydraulic lifters and springs, and have 2500 - 6000 rpm range Stock base circle sizes so stock pushrods can be used V4 Grind Cam Intake Open: 30 degrees Close: 46 degrees Duration at .053: 256 degrees Valve Lift: .490 Exhaust: Open: 52 degrees Close: 24 degrees Duration at .053: 256 degrees Valve Lift: .490 The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.

Specs

Type - Engine	Evo Sportster Style
Type	Cam
Type	Camshaft
Units	Set
Weight	4.2 lbs

This item fits the following machines:

Harley-Davidson
1986-1987	Sportster - XLH 1100
1988-1990	Sportster - XLH 1200
1986-1990	Sportster - XLH 883
1986-1990	Sportster Deluxe - XLH 883
1987-1990	Sportster Hugger - XLH 883