Truck Tire Groover 350W Professional Tyre Regroover Grooving Tire Iron +20 Blade
Product Description
This Groover Is Very Hot Right Away. You Don't Have to Wait for It to Heat up to Start Grooving. When You Insert This Product, It Immediately Heats up to the Setting on the Dial, Which Has Adjustable Thermal Settings 1 to 4.
Operational Instruction
1. Check That the Power Supply Meets the Criteria for Tire Slotting.
This Groover Is Very Hot Right Away. You Don't Have to Wait for It to Heat up to Start Grooving. When You Insert This Product, It Immediately Heats up to the Setting on the Dial, Which Has Adjustable Thermal Settings 1 to 4.
Operational Instruction
1. Check That the Power Supply Meets the Criteria for Tire Slotting.
2. Place the Tire Slotper in a Smooth and Stable Position Before Use.
3. Turn on the Power Switch to See If the Work Light Is on. the Temperature Control Switch Is Set to Half and the Voltage Gear Is Set to Three Gear Positions.
4. the Blade Should Not Be Dry, the Depth of the Knife Is Fixed and some Depth Is Revealed.
5. the Contact Points of the Two Copper Head Clip Blades Are Not Allowed to Be Together, Otherwise the Main Unit Is Easily Damaged.
6. While Operating the Machine, Hold the Handle with the Front Blade down and the Blade Will Turn Red After Three to Five Seconds.
7. Then Loosen the Handle Immediately, Otherwise the Blade Will Burn out After a Long Time.
Description:
- In the Tire Surface Carved out 2-20mm Wide and 7-20mm Deep Tread, Together with Blade Heating Systems.
- Carving Patterns: U-, V-straight Line Type, and Etc.
Application Range:
Mainly Used for Tire Carving, Engraving, Old Tire Refurbished, Rubber/Rubber Cylinder Slotting, Rubber Cutting, Rubber Sole Slotting, Foam Slotting, Etc. It Can Open "U" Type and "V" Type, Right Angle Stripe.
Specification:
Model: Tire Groover
Voltage: Ac 110v
Power: 350w
Working Type: Manual
Temperature Range: 0-399℃, Suggest Working Temperature: 150-200℃
Weight: About 7 (Kg)
Product Contain List:
Regroover: 1 Set
Knives Set: 20 Pcs
Knives Set for Tire Regroover, It Includes Following Knives:
U-type: 2mm 4mm 6mm 8mm 10mm, Each 2pieces, Total 10pcs
- Carving Patterns: U-, V-straight Line Type, and Etc.
Application Range:
Mainly Used for Tire Carving, Engraving, Old Tire Refurbished, Rubber/Rubber Cylinder Slotting, Rubber Cutting, Rubber Sole Slotting, Foam Slotting, Etc. It Can Open "U" Type and "V" Type, Right Angle Stripe.
Specification:
Model: Tire Groover
Voltage: Ac 110v
Power: 350w
Working Type: Manual
Temperature Range: 0-399℃, Suggest Working Temperature: 150-200℃
Weight: About 7 (Kg)
Product Contain List:
Regroover: 1 Set
Knives Set: 20 Pcs
Knives Set for Tire Regroover, It Includes Following Knives:
U-type: 2mm 4mm 6mm 8mm 10mm, Each 2pieces, Total 10pcs
V-type: 2mm 4mm 6mm 8mm 10mm, Each 2pieces, Total 10pcs
