Description

Our digital photosensitive seal is designed with a separate exposure box, which brings more accurate positioning of the exposure and keeps it from being misaligned, resulting in a more accurate seal. It also has three adjustable modes that you can freely choose according to your needs. In addition, the built-in voltage regulator, automatic power-off safety design, and drawer-type exposure box can also provide you with higher safety in use. It will be your ideal tool for making stamps!

Key Features

High-quality Material: This product is made of a high-quality metal shell, and the surface is baked with lacquer processing, which has high hardness, high abrasion resistance, anti-corrosion, rust-proof performance, and long service life.

Easy to Carry and Store: The top handle and compact size (14.96*5.71*7.87 inches) make the product easy to carry and store, and it won't take up too much space on your desktop.

Easy to Use: Clear touch buttons, touch screen, and smart digital display make operation easier. You can also freely choose the mode to use among the 3 modes (traditional, pre-charge, disable) and adjust the energy at will.

Clear Exposure: Every 6 capacitors in the 18 groups of Black Diamond capacitors are independently connected to a thickened exposure tube, thus eliminating crosstalk and making the exposure clearer.

Efficient Heat Dissipation: Large heat dissipation holes and magnetic levitation bearing cooling fan can effectively accelerate the internal heat dissipation of the machine, thus making the machine run more smoothly and efficiently.

Low Noise: The built-in magnetic levitation-bearing cooling fan provides a low-noise working environment while dissipating heat, thus keeping you comfortable while working.

High Safety: The built-in voltage regulator allows the product to be used at 110-220 V at the same time. In addition, the 5-minute automatic power-off safety design allows it to be fully automatic and intelligent exposure without the need for manning. The drawer-type exposure box can also be well-protected from damage to your eyes during the exposure process.

High Durability: More than 60,000 exposures allow you to use it for a long time. 3800j maximum output energy also allows it to produce more three-dimensional and efficient stamps in a shorter time.

Separate Design: The separate exposure box design allows for accurate positioning of the exposure and is free from misalignment, resulting in more precise embossing.

Details

Anti-slip Feet: Anti-slip feet not only enhance the stability of the product, but also effectively prevent the bottom of the product and the desktop from being worn.

Indicator Lights: Two indicator lights allow you to see the working and power status of the machine at a glance, thus making the operation more accurate.

Temperature Display: The temperature display makes it easy for you to observe the real-time temperature, thus providing you with a higher level of safety.

How to Make a Photosensitive Seal

(1) First, use typesetting software to typeset the seal. Due to the high clarity of the photosensitive seal, many photosensitive seal typesetting software currently has the ability to program fingerprint security, border security, pinstripes, etc. Users can use the randomly generated anti-counterfeiting lines to typeset anti-counterfeiting seals.

(2) Use a laser printer to type the seal draft. After the seal is well typeset, it is necessary to use the laser printer to print the chapter draft on sulfuric acid paper or transparent film. At this point, the laser printout needs to have sufficient blackness and uniformity, otherwise, it will seriously affect the production quality of the photosensitive seal.

(3) Exposure with photosensitive seal machine: the printed chapter draft of a sulfuric acid paper or film covered with transparent exposure film and a photosensitive seal pad. The order and orientation between the three in turn for the back of the chapter draft towards the exposure of light sources, the chapter draft printing surface close to the exposure film, exposure film close to the seal pad. The three in turn smooth and close contact, and the middle of the gap type wrinkles are strictly prohibited. The three were pressed tightly and then exposed.

How to Add Printing Oil to the Photosensitive Stamp

The working principle of the photosensitive stamp machine is to use the optical principle to print the text and pattern on the special photosensitive pad by light. The surface of the photosensitive stamp is flat, and the surface without lines cannot penetrate the printing oil. Therefore, when adding oil, only a small amount of oil should be applied to the surface of the word with lines, and after a few minutes, the oil that has not penetrated the surface can be wiped clean with a soft paper towel. It is not advisable to add too much at a time because it can penetrate only the surface of the words and lines part, so it will penetrate more slowly. On the other hand, too much printing oil can not be penetrated in a short period of time and will only pollute the seal frame.

Application

It is suitable for making cartoon stamps, personalized stamps, stamp logos, branding stamps, wedding seals, and other types of DIY stamps in the seal industry, professional portrait chop shops, tourist sites, etc. 

Specification 

Color: Blue

Material: Metal

Process: Baking Paint

Capacitor: Black Diamond Capacitor

Plug Standard: US Standard

Assembly Required: Yes

Service Life: ＞6 Years

Exposure Times: ＞60,000 Times

Number of Lamps: 3 Double Electrode Thickening

Maximum Output Energy: 3800 Joules

Maximum Charging Time: 30 seconds

Output Voltage Range: 360-400V

Exposure Range: 110*70MM/4.33*2.76in

Stamp Area: 100*65MM/3.94*2.56in

Resolution: 0.0256MM/0.001in

Power Supply Voltage: 110V-220V/50HZ

Lamp Length: 15CM/5.91in

Fixture Size: 110*70MM/4.33*2.76in

Gross Weight: 7kg/ 15.43 lbs

Product Size: 38*14.5*20 cm/ 14.96*5.71*7.87 in

Package Size: 43.5*21.5*27 cm/ 17.13*8.46*10.63in

Package Included    

1 * Digital Photosensitive Seal

1 * Chinese Manual

1 * Power Cord

1 * Fixture

1 * CD-ROM

1 * Exposure Film

1 * Sulfuric Acid Paper

10 * Photosensitive Pads

2 * Stamp Shells

2 * Red Printing Oils

Notes

• The photosensitive stamp machine needs to be printed with a laser printer.
• This instrument contains high voltage, please do not open the case at will. If there is any malfunction, please contact customer service in time.
• To prolong the service life, please keep the working environment clean.
• The machine contains a glass photosensitive lamp, so please be careful during use and handling.
• When the power switch of the machine is turned on, the photosensitive machine is ready to start charging. In order to prolong the service life, please develop the habit of turning on the machine before use and turning off the power in time after exposure, and do not standby for a long time.
• When the working environment is too hot or the workload is too large, please pay attention to intermittent use and heat dissipation.
• Please keep the glass plate of the photosensitive machine clean at all times. If there is pollution, please clean it in time, otherwise, it will affect the quality of the seal. If it cannot be cleaned, please replace it in time.
• During exposure, a little light will come out from the heat-dissipation holes behind the housing, so please do not look directly at them with your eyes.
• Products with electrical plugs are designed for use in the US. Please check compatibility before purchasing.
• Please allow the slight color difference caused by the shooting light and the 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.