Product Description
Fit Vehicles:
Fits the following 2003-2005 Jaguar Years: |
|||
Year |
Model |
Engine |
Position |
2003-2005 |
S-TYPE |
V6 3.0L |
Upstream and Downstream |
Note: #N/A |
|||
2003-2005 |
S-TYPE |
V8 4.2L |
Upstream and Downstream |
Note: #N/A |
|||
2004-2005 |
Vanden Plas |
V8 4.2L |
Upstream and Downstream |
Note: #N/A |
|||
|
|||
|
|||
Part Number: |
234-9030,234-4798 |
||
Wires: |
4 |
||
Length(Sensor to Lead): |
300mm,550mm |
||
Package include: |
2x Oxygen Sensor + 2x Air Fuel Ratio oxygen sensor |
NOTE:
Communication is the best way to solve the problem.If you have any problems after purchasing, pleasecontact us in time, before opening return or case.We surely provide a solution for you with in 24hours!
Must Know Before Buying:
The following information is for instructional and guidance reference only. If Check Engine Light is on or an OBDII Trouble/Fault code occurs after installation, check the sensor with a voltmeter as below. If the sensor is good, further diagnosis is required.
Reading the Oxygen Sensor’s Signals
Use a 10-megaohm digital voltmeter. Hook up the voltmeter's red probe to the sensor's signal wire and the black probe to engine ground. (Use back probe method, DO NOT pierces the wire.)
Start the engine and check the sensor’s voltage signals on your voltmeter. The sensor voltage should cycle or fluctuate within the 100 mV-900 mV (0.10 to 0.90V) range approximately. This means the sensor is operating properly.
Please take a video clip of the voltmeter and contact us if our sensor:
Goes above range between 0.1 and 0.9 volt
Remains below 0.5 volts
Stays fixed at a particular voltage
you’re free to choose replacement or refund if our sensor fails to work.
For multiple purchases, please add items to your Ebay shopping cart and pay once for entire order.
l Items will be shipped to buyer's eBay registered address. Please confirm your address before making payment.
l We will NOT be responsible for any delay during delivery including but not limited to customs postage checking, strike, force majeure etc
Out 30-day Satisfaction Guarantee assures our customers that they will receive all orders promptly and exactly as described. In addition , it allows customers to return new and unused products in their original factory condition for any reason within 30 days from the date of purchase.
Notice:
1.All returns must be pre-approved by Autopartm and have a return merchandise authorization (RMA) number.Unauthorized returns will not be accepted.
2.Buyers are responsible for appropriate packing, returning shipping cost, insurance and returning the item in “new” condition. Used items will not be accepted for return.
3.We will replace the returning item with an identical item, issue a full store credit or a full refund.
There is a difference between Genuine and OEM / OE Supplier brands. A genuine part is a part in the auto manufacturer’s original box with their logo on the box. OEM / OE Supplier is a brand licensed by the vehicle manufacturer and the part will not come with the vehicle manufacturer’s logo on it. OEM / OE Supplier parts are often the same parts you’d get at the dealership, just in a different box. We do not accept returns based solely on where a part is manufactured.