![dc 12v 1ch wireless remote control switch](https://ae01.alicdn.com/kf/Hf18efc4a85924ae88e4d57e2945546435.jpg)
Package 1 Included: Only 1 EV1527 Learning code Remote Control * 1pcs ;
Package 2 Included: (Only 1 receiver) Receiver module (KR1201 ) *1pcs ( include Shell );
Package 3 Included: 1 Pcs * Receiver module (KR1201) ( include Shell ),
Package 4 Included: 1 Pcs * Receiver module (KR1201) ( include Shell ),
![c2](https://ae01.alicdn.com/kf/HTB1wytVDf5TBuNjSspmq6yDRVXav.jpg)
![c3](https://ae01.alicdn.com/kf/HTB1hvAhkyMnBKNjSZFzq6A_qVXaY.jpg)
![c4](https://ae01.alicdn.com/kf/HTB1vSthDeuSBuNjSsplq6ze8pXar.jpg)
![gift](https://ae01.alicdn.com/kf/HTB1ISJnj9tYBeNjSspaq6yOOFXah.jpg)
Momentary:Push the remote button , the relay connects, release the remote button , the relay dis-connects.
Toggle:Push once the remote button , the relay connects , push twice the remote button , the relay dis-connects .
Latching:Push the remote button A, the relay connects, push the remote button B, the relay dis-connect.
Time delay mode :Push the remote control button , the relay connects , from when release the remote button , after 5s or 10s or 15s , the relay disconnect automatically.
Clearing the code :
Learning the code :(momentary)
Push the learning key on the receiver once time , it comes into momentary setting mode .
Wait for a moment , the LED will be on, it comes into learning state .
Push the remote button , LED indicator on the receiver board will flash 3 times and then come off,
learning successfully .
Learning the code : ( Toggle )
Push the learning key on the receiver twice time , it comes into toggle setting mode
Wait for a moment , the LED will be on , it comes into learning state .
Push the remote button,LED indicator on the receiver board will flash 3 times and then come off,
learning successfully .
Learning the code :( Latching )
Note: When you choose for latching mode , in order to learn more remote control , you need to learn two different button , the first time learnt is for “ON”, the second time learnt for “OFF”.
For example : button A = ON , button B = OFF
Push the learning key on the receiver triple time , it comes into latching mode .
Wait for a moment , the LED indicator on the receiver board will be on,
Push the remote button A,
LED flash for 3 times .
Push the remote button B .
Led indicator flash for 3 times and then come off,
learning successfully.
A = ON , B = OFF .
Learning the code :( Time delay mode )
Push the learning key on the receiver forth time , the time dealy for 5 seconds .
Push the learning key on the receiver fifth time , the time delay for 10 seconds .
Push the learning key on the receiver sixth time , the time delay for 15 seconds .
The LED indicator will be off .
Push the remote button , LED flashes and off .
After 3 seconds , the LED indicator will be on again , learning successfully .
NOTE: The system can store for 25 pcs of remotes , if the remote get more than 25 pcs , the initial remote control will be lost .
![](https://ae01.alicdn.com/kf/HTB1EifLjL9TBuNjy0Fcq6zeiFXap.jpg)
![_05](https://ae01.alicdn.com/kf/HTB1eoHqjQKWBuNjy1zjq6AOypXa8.jpg)
![_06](https://ae01.alicdn.com/kf/HTB1xoJ0DkCWBuNjy0Faq6xUlXXat.jpg)
![_07](https://ae01.alicdn.com/kf/HTB1auaxDhGYBuNjy0Fnq6x5lpXaF.jpg)
![-5](https://ae01.alicdn.com/kf/HTB1PMFHkqQoBKNjSZJnq6yw9VXan.jpg)