Please carefully confirm the model purchased. There are many options in this link. The SKU image is also very clear. "ONLY" means only this part (no other parts). We don't want to cause misunderstanding to every friend!
Every parcel only get 1 pcs cross screwdriver as a free gift whatever how many you order.
Note :
This remote control only support the learning code (1527) of the receiver
Compatible with remote control using these chips:
PT1527,EV1527, SCT527, HS1527, SCL1527, FP1527,EV1527
Do not use this remote control to clone other remote controls,you will lose the built-in 1527 encoding.
About the DC 12V 2CH Transmitter: Operating frequency: 433.92MHz Power by 6V Coin Cell Button Battery (Battery included ), Material: PVC. Button: 2 buttons Size: 59mm x 28mm x 8mm; Operating voltage: 6V ; Operating Current: 12mA Transmitting power: 10mw Modulation mode: ASK (AM). Encoding type: Learning. Transfers distance: 80m |
|
Technical Data Of Receiver: Input Power:AC90V-250V, Maximum load: ≤10A, Static current: 3.6 mA ~ 5.5mA, RF Frequency:433MHz, RF working mode:superheterodyne, Receive sensitivity: >97dbm, Transmitting distance:>50m ( open space), Decoding mode:MCU software decoding, Remote storage:25pcs, Support remote type: 1527 Learning code, 2262 Fixed code(Rolling code can be design), Working mode: Momentary, Toggle, Latching, Time delay (5s ,10s ,15s,20s ), Automatic energize when power on, Wiring type:fixed terminal, Dimension of PCB: 55*32*18mm (L,W,H), Learning style: Learning Button, Working temperature: -20 degrees 80 degrees, Color: white, black. |
|
About Working mode:
Momentary:Push the remote button , the relay connects, release the remote button , the relay dis-connects.
Toggle:Push once the remote button , the relay connects , push twice the remote button , the relay dis-connects .
Latching:Push the remote button A, the relay connects, push the remote button B, the relay dis-connect.
Time delay mode :Push the remote control button , the relay connects , from when release the remote button , after 5s or 10s or 15s or 20s, the relay disconnect automatically.
Automatic energize when power on: when power supply, the relay connects.
Clearing the code:
Push the learning button on the receivers for 9 times , until the LED indicator OFF and then flash,until it flash for 5 times. it mean the code have been cleared successfully;
After clearing the code, all the remote control can not work any more.
Learning the code:(momentary)
Push the learning key on the receiver once time , it comes into momentary setting mode .
Wait for a moment , the LED will be on, it comes into learning state .
Push the remote button , LED indicator on the receiver board will flash 3 times and then come off,
learning successfully .
Learning the code:( Toggle )
Push the learning key on the receiver twice time , it comes into toggle setting mode
Wait for a moment , the LED will be on , it comes into learning state .
Push the remote button,LED indicator on the receiver board will flash 3 times and then come off,
learning successfully .
Learning the code :( Latching )
Note: When you choose for latching mode , in order to learn more remote control , you need to learn two different button , the first time learnt is for “ON”, the second time learnt for “OFF”.
For example : button A = ON , button B = OFF
Push the learning key on the receiver triple time , it comes into latching mode .
Wait for a moment , the LED indicator on the receiver board will be on,
Push the remote button A,
LED flash for 3 times .
Push the remote button B .
Led indicator flash for 3 times and then come off,
learning successfully.
A = ON , B = OFF .
Learning the code :( Time delay mode )
Push the learning key on the receiver forth time , the time dealy for 5 seconds .
Push the learning key on the receiver fifth time , the time delay for 10 seconds.
Push the learning key on the receiver sixth time , the time delay for 15 seconds .
Push the learning key on the receiver seventh time , the time delay for 20 seconds .The LED indicator will be on .Push the remote button , LED indicator flashes 3 times and then off, learning successfully .
Learning the code : (Automatic energize when power on)
Push the learning key on the receiver eight times , it comes into setting mode
Wait for a moment , the LED will be on , it comes into learning state .
Push the remote button,LED indicator on the receiver board will flash 3 times and then come off,
learning successfully .
NOTE: The system can store for 25 pcs of remotes , if the remote get more than 25 pcs , the initial remote control will be lost .