eBay

Feature:

1. The motor adopts all‑metal gear with strong load‑bearing capacity and effectively protects the gear box motor body.
2. The gear bearing is a micro‑reduction type, which can reduce the speed of the motor, and can run with low noise and high torsion.
3. The motor wire is made of pure copper, with good conductivity, and the power of the geared motor is instantly increased by 30%.
4. Spindle is made of steel, which has good toughness and impact resistance, which can increase the service life of bearing and gear motor.
5. Widely used in automatic vending equipment, currency detectors, coin return equipment, automatic doors, toy motors, etc.

Specification:

Item Type: Electric Motor
Bearing Type: Porous bearing
Gear Material: Metal
Motor Wire Material: Copper wire
Spindle Material: Steel
Radial Force: ≤ 1 kgf
Axial Force: ≤ 0.7 kgf
Spindle Maximum Bearing Capacity: ≤ 5 kgf
Rated Voltage: DC 12V

Model	Reduction Ratio	No-Load Speed	Load Speed	Load Torsion	Gearbox Size
ZGA37RG 550R-12V	1：9	550RPM	460RPM	0.48Kgf/cm	Approx. 37 x 29.5mm / 1.5 x 1.2in
ZGA37RG 110R-12V	1：31.6	110RPM	90RPM	1.2Kgf/cm	Approx. 37 x 24.5mm / 1.5 x 1in
ZGA37RG 12R-12V	1：401	12RPM	11RPM	10Kgf/cm	Approx. 37 x 30.5mm / 1.5 x 1.2in
ZGA37RG 29R-12V	1：172	29RPM	24RPM	6Kgf/cm	Approx. 37 x 29.5mm / 1.5 x 1.2in

Output Shaft Size (D x L): Approx. 6 x 14mm / 0.2 x 0.6in(manual measurement error ±1mm)
Motor Size (D x L): Approx. 36 x 33.3mm / 1.4 x 1.3in(manual measurement error ±1mm)
Mounting Hole Size: M3
Application: Automatic vending equipment, panning cameras, slot machines, currency detectors, coin return equipment, automatic doors, peritoneal machines, toy motors, etc.

Package List:

1 x Motor

Note:

1. Use Tolerance: Pay attention to the use of voltage and current range, otherwise the performance and life of the motor will be reduced.

2. Transport the Motor: Gently, try to use a part of the motor housing.

3. Motor Wiring: Red leads to the positive pole, black leads to the negative pole, if the connection is reversed, the motor rotates in the reverse direction.

4. Overload: As far as possible within the specified load range, it is forbidden to run the motor for too long in a locked‑rotor or close to stall state. Otherwise, the motor will burn out.

5. Motor Storage:

Storage Temperature: 0℃‑40℃

Storage Humidity: 15%‑90%RH

Avoid placing it in high temperature, high humidity and corrosive gas.

6. Motor Operating Temperature: 0℃‑70℃

1. Our listing price includes the value of goods,packaging cost,and export taxes,not including international duties.
2. duties,taxes,and charges are not included in the item price or shipping fee.
3. The duties are buyers' responsibility.Please check with your country's customs office determine what these additional costs will be prior to your purchase.
4. All disputes arising from the duties will be submitted to ebay for solution.

1. Any questions, pls. contact us via ebay message or email us.We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. post a message again because sometimes our message system may block some emails.

2. If you are satisfied with our service, pls. kindly leave us a positive feedback and give us the Detailed Seller Rating with all "5 " in very area
3. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy.

We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.

https://image-us.chengykj.com/upload/third_resource/image/shipc73.jpg

On 29/03/2024 at 08:08:43 AEDT, seller added the following information: