Multitool 2 x 48 inch, 1 hp Belt Grinder
The popular Multitool 2x48 belt grinding attachment is now available
mated to a 1 hp grinder. This longer belt model allows for more room to
grind on the top platen and a longer abrasive life than other models.
More than a traditional belt sander, this versatile tool has a belt
speed of approximately 4,970 surface feet per minute which allows for
material removal up to 5 times faster than with the equivalent grit
grinding wheel.
In addition to the 8-inch grinding stone on the left, the Multitool
has four different grinding surfaces to cover almost any grinding need.
The most used surface is the front contact wheel which has a serrated
surface to make grinding and deburring very controllable and smooth. The
top platen can be used for straightening or profiling longer edges and
the underside of the Multitool has a slack belt area for blending and
finishing. Finally, the 7-inch disc on the side can be used with or
without the optional miter table for beveling and profiling or final
finishing.
Belts change in seconds from grinding to sand, deburr, or polish. A variety of belts and discs are available for any project.
Specifications •Motor: 1 hp, 110 volt
•Belt Width (inches): 2
•Belt Length (inches): 48
•Belt Speed: 4970 feet per minute
•RPM: 3450
•Contact Wheel Diameter (inches) : 3.5
•Platen Size (inches): 2.125 x 11.25
•Disc Size (inches): 7
•Weight (pounds): 47
NOTE: Normally a stocked item, if not, lead times may exist. Feel free to contact us for availability.
Visit our website to see our full line of metal fabrication equipment!
|