ENGMATE 4 Axis CNC Kit TB6600 Driver HB Nema14 62oz-in Motor 12V PSU For DIY
/9
Descriptions
ENGMATE™ 4 Axis TB6600 Standard Driver Board Kit for CNC DIY
For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. This is an Electronics Kit which includes 1*4 Axis TB6600 Standard Driver Board+4*EMA142-4520S4 Nema14 62oz-in Stepper Motors+1*12V 10A Switching Power Supply
This 4 Axis TB6600 Standard Driver Board is equipped with TB6600HG chip. Compared with TB6560AHQ chip, the max work voltage of TB6600HG is up to 50V, the output current is up to 5A. It is specially developed for all the 2 or 4 phase Nema8, Nema11, Nema14, Nema16, Nema17, Nema23, Nema24, Nema34 stepper motors which are with higher current. It can be directly controlled by the PC via the Mach3, Mach4, EMC2, KCAM4, etc..
DIP Switch Setting
Before powering on the board, please set the DIP Switches first.
| Microstep Mode | SW1 | SW2 | SW3 | Output Current | SW4 | SW5 | SW6 |
| N/A | ON | ON | ON | 0.2A | ON | ON | ON |
| 1(Full Step) | OFF | ON | ON | 0.6A | OFF | ON | ON |
| 2 | ON | OFF | ON | 1.2A | ON | OFF | ON |
| 2 | OFF | OFF | ON | 1.8A | OFF | OFF | ON |
| 4 | ON | ON | OFF | 2.5A | ON | ON | OFF |
| 8 | OFF | ON | OFF | 3.3A | OFF | ON | OFF |
| 16 | ON | OFF | OFF | 4.2A | ON | OFF | OFF |
| N/A | OFF | OFF | OFF | 5.0A | OFF | OFF | OFF |
Matching Stepper Motors and Power Supply
| Model | Motor Size | Recommended Supply Voltage | Recommended ENGMATE Stepper Motors |
| TB6560 | Nema8, Nema11, Nema14, Nema16, Nema17 | 12V DC | EMA082-4208S4, EMA112-5106S4 |
| Nema23, Nema24 | 24V DC | EMA232-5615S4, EMA242-8840S4 | |
| TB6600 | Nema8, Nema11, Nema14, Nema16, Nema17 | 12V DC | EMA142-3412S4, EMA172-4016S4 |
| Nema23, Nema24 | 24V DC | EMA232-7630S4, EMA242-8840S4 | |
| Nema34 | 36V DC | EMA342-6530S4, EMA342-7842S4 |
4 Axis TB6600 Standard Driver Board
- • High performance, cost-effective
- • Manual motor control via the control panel; support tool-settings on X, Y, Z, Axis without the computer
- • Automatic identification andintelligent switch between the computer and the control panel
- • Synchronous coordinates display on the computer and the display panel, up to 3 axis (X, Y, Z, axis)
- • Real-time tracking of the motor moving path
- • 1, 2, 4 (new mode), 8, 16 adjustable microstep control for more accurate and smoother motor running
- • Two-stage signal processing, smooth signal transmission
- • Automatic idle-current reduction, powerful anti-jamming capability
- • Overload, overcurrent, overvoltage, overheat protection
- • 5 types of input control on the manual control interface, to set Limit, Estop, Midpoint-Setting, Cutter-presetting/Tool-Setting, etc.
- • 4 types of output current adjustable
- • With 0-10V PWM signal output port for speed adjustment and one relay control port
- • Compatibility with Mach3(Recommended Software), Mach4, Linux CNC (EMC2), KCAM4 CNC Software, etc.
- • Suitable for 2 or 4 phase stepper motors with 0.2A~5.0A(PEAK) rated current
- • Aluminum & high intensity PVC Box Design for better cooling effect and item protection
Hybrid Stepper Motor (EMA142-4520S4)
- • High torque, more smooth movement
- • High efficiency, energy-saving, low noise, and low vibration
- • High start torque, low start current, and reliable performance
- • Simple 4 wires ensure easier wiring, installation, and maintenance
Switching Power Supply
- • High efficiency, high reliability, low cost
- • Adjustable ±10% Output Voltage support
- • PWM control and regulation, ensure the steady and precise output voltage
- • Over-temperature protection: built-in a powerful fan for cooling. Power on, fan on. RTH3≥85°C, output shutdown
- • Built-in EMI filter
- • 100% full load burn-in test
- • Over current, over voltage, short circuit
- • Low output ripple and yawp
Connection
The products in the wiring diagram are for reference.
Applications
Suitable for a variety of small-sized automation equipment and instruments.
- • For any small-and-medium automatic equipment with CNC controller, such as engraving machine, plasma cutting machine, milling machine, foam cutting machine, lathes, laser cutting machine etc..
- • For other industrial application, such as 3D printer, medical instruments, stage light equipment, robot, music fountain etc..
Specifications
| Electrical Properties of TB6600 Driver Board (ambient temperature Tj = 25°C) | ||
| Product Name | 4 Axis TB6600 Standard Driver Board |  |
| Version Type | 4 Axis Standard Version | |
| Type | TB6600 | |
| Input Voltage | 12V-45V | |
| Output Current | 0.2A-5.0A (Peak) | |
| Drive Type | Pulse + Direction + Enable Signal Control (Bipolar constant-current PWM output) | |
| Relay | SRA-12VDC-CL 20A 14VDC 20A 125VAC | |
| Suitable Motor | Nema8, Nema11, Nema14, Nema16, Nema17, Nema23, Nema24, Nema34 | |
| Weight | 700g | |
| EMA142-4520S4 Stepper Motor | ||
| Model NO. | EMA142-4520S4 |  |
| Motor Type | 2-Phase | |
| Step Angle (°) | 1.8 | |
| Rated Voltage (V) | 5 | |
| Rated Current (A) | 2 | |
| Phase Resistance (Ω) | 2.5 | |
| Phase Inductance (mH) | 2.6 | |
| Holding Torque (kg.cm/oz-in) | 4.5/62 | |
| Rotor Inertia (g.cm²) | 28 | |
| Motor Length (mm/in.) | 45/1.77 | |
| Frame Size (mm/in.) | 35/1.38 | |
| Lead No. | 4 | |
| Shaft | Single | |
| Motor Weight (g) | 200 | |
| 12V 10A Switching Power Supply | ||
| Output Voltage | 12V |  |
| Output Voltage Tolerance | ±1% | |
| Rated Output Current | 10A | |
| Output Current Range | 0-10A | |
| Output Voltage Adjustment Range | ±10% | |
| Output Power | 120W | |
| Input Voltage Range | 110VAC/ 220VAC±20% (selected by switch) | |
| Input Frequency | 47~63Hz | |
| Input Current | 10A/115VAC, 5.0A/230VAC | |
| Efficiency | 85% | |
| Inrush Current | 25A/115VAC, 50A/230VAC | |
| Leakage Current | <3.5mA/240VAC | |
| Over Load Protection | 115%~135% hiccup mode, auto-recovery | |
| Over-voltage Protection | 15.6~17.8V hiccup mode, auto-recovery | |
| Over-temperature Protection | Power on, fan on. RTH3≥85°C, output shutdown | |
| Working Temperature & Humidity | -10°C~+60°C, 20%~90%RH | |
| Storage Temperature & Humidity | -20°C~+85°C, 10%~95%RH | |
| Antiknock Characteristic | 10-500Hz, 2G, 10min./period, duration 60mins | |
| Withstand Voltage | I/P-O/P:1.5KVAC, I/P-FG:1.5KVAC, O/P-FG:0.5KVAC | |
| Insulation Resistance | 100M ohms/500VDC | |
| Safety Standards | UL1012 | |
| EMC Standards | EN55022, Class A | |
| Weight | 600g | |
Content
| Estimated Delivery Time | ||
| Country/Region |
Standard (Business Days) |
Express (Business Days) |
| UK, EU (27 Countries) | 6 - 12 | 4 - 6 |
| Other European Countries | 6 - 15 | 4 - 7 |
| USA, Canada, Mexico | 5 - 10 | 3 - 5 |
| Australia, New Zealand, South Asia, East Asia | 7 - 12 | 3 - 5 |
| South America, Other Countries/ Regions | 15 - 25 | varying |
Remarks
- • Usually, we dispatch your order within ONE to Three WORKING DAYs upon receipt of full payment when stock lasts.
- • Above estimated delivery time is not guaranteed. However, 95%+ parcels are delivered within the reference time.
- • For fixed-time delivery or any special needs, please do contact and confirm with us BEFORE placing order.
Duties-and-Taxes
- • Under EU VAT rules, all goods sold to EU are subject to VAT at local rate.
- • Starting 1 July 2021, eBay will collect VAT on certain orders delivered to EU addresses, on behalf of customers local tax authorities. When you see VAT is included/collected on invoice after cleared payment, you can just wait for the parcel to arrive at your door. Estimated delivery time is 4-12 business days, varies between destination countries and delivery services chosen.
- • For orders above a certian value, eBay will not collect VAT at checkout, buyers are required to declare and pay tax at point of import.
- To facilitate smooth customs clearance, we work with world's leading international couriers (i.e. FedEx, DHL) to ship your parcel via commercial grade express delivery service. The courier will properly handle customs duty and tax declaration when importing the parcel. You don't need to contact or visit customs/tax office in person. All you need to do is to pay your tax fees on delivery. Parcels will be delivered within 4-6 business days to most EU addresses under such arrangement.
Satisfaction Guaranteed
30 Days Money Back Guarantee
- If you are not satisfied with the item purchased from us. Please contact us in writing (e.g. e-mail, eBay message) within 30 days of receipt of goods for return & refund guidance.
Free Replacement
- If you receive a not-as-described (e.g. defective, incorrect, part missing) item, please contact us upon receipt of the item. We will arrange a replacement as soon as the case is confirmed.
12 Months Supplier Warranty
- We provide ONE YEAR warranty on this product from date of purchase. If your item has any warranty issues, please contact us for a satisfying solution.
Requirements
- • All qualified return/replacement must be guided by us. We may not accept your return without communication in advance.
- • Any customs fee, handling charges, postage and insurance incurred in return/replacement are on customer's cost.
Agreement: By placing an order, you acknowledge that you have accepted the terms and conditions of sale. You are welcome to contact us with any questions.