2000W Wind Turbine Grid Tie Inverter Input 45-90V AC Output 110V AC w/ Limiter
 

--Max Efficiency:>92%               MPPT Efficiency:99%

  --DC/3PHASE AC  22-65V/ 45V-90V

  --AC   100V 110V 120V 220V 230V 240V  50hz 60hz 

 

 

NEW 1000W Wind Power Grid Tie Inverter   

Max Efficiency:>92%               MPPT Efficiency:99%

 1.  Low cost and easy installation 
 2.  Directly connect to three phase wind turbine
 3.  Much better output waveform compare with similiar GTI
 4.  Improving the efficiency of the entire Wind power system
     Overload protection ,Anti-island protection
     Short-circuit protection/Reverse polarity protection 
 5.  AC output voltage and current THD<5%,PF>99%              
 
   wind1-1
This model grid tie has designed for wind turbines that put out 3 phases AC voltage. It can maintain the rotating speed of the wind turbine and keep the voltage from the wind turbine always at the range of the rated range of the grid tie inverter. It also has a high voltage protection function, when the wind is too big, and the dump load controlling system can’t keep the output voltage from the wind turbine, the controller will disconnect itself from the wind turbine, so it is very safe to be used.

Technical Data


Model

TEG-2000G2-WAL 

TEG-1000G2-WAL 

Max. Power Output

2000W

1000W

Input AC/DC Voltage Range

22-65V/45V ~ 90V

AC Output Voltage Range

90-130V / 190VAC ~ 260VAC

Output Frequency

46Hz~65Hz

Standby Power Consumption

<0.5W

Total Harmonic Distortion

<5%

Peak Inverter Efficiency

92%

Power Factor

0.99

Output Wave Form

Pure Sine Wave

MPPT Efficiency

99%

Over Current Protection

Yes

Over Temperature Protection

Yes

Reverse Polarity Protection

Yes

Anti-Island Protection

Yes

Stackable

Yes

Weight ( Kg)

6.5kg

5.5KG

Dimensions (W x H x D)                                  

434*196*88mm                    

322*196*88mm

 

(1) (2) Dump load resistor connection Terminal. This terminals will connect to the dump load resistor.

(3) AC socket,This socket will connect the inverter to the public grid via the AC cable.

(4) Cooling fans.

(5) Input Terminals. This terminals will connect to the wind turbine. 

     

Inverter Display Instruction

 

wind1-6

The Inverter display can show many information,The main interface of the display and the icons explainations are show above.

Set Menu:Choose the set menu icon on the main screen interface,click the confirm button to enter into the interface show below,In this interface,can set the LCD backlight always on or auto turn off backlight after 3 minutes no action.

The inverter also integrate with internal limiter and external limiter function which can prevent excess power from going to the public grid.Select the internal limiter mode,inverter will work under limiter mode,output power of the inverter will be determined by load power.Select the external limiter mode,inverter need a external limiter module working with it.For more details about the limiter function,pls contact supplier. ( this function only useful with limiter type inverter. )

WIND LIMITER

 

Power View:

In this interface,the display shows real time power,PV input voltage, inside temperature,date and time.

HTB13cryLVXXXXX5XXXXq6xXFXXXG

 

Clock And Date Setting:

Set the clock and date in this page,save the setting before exit.

HTB1A_baLVXXXXbEXVXXq6xXFXXX3

 

Notes: Save the setting after you reconfigurate the working mode or backlight setting.

Notes: Battery Discharge Current Mode And Battery Discharge Power Mode are not developed yet for this wind inverter.

Grid Waveform:

This interface will show the real time grid waveform.The grid voltage and frequency also will show in this interface.

 

HTB1RlfiLVXXXXa0XFXXq6xXFXXXE

 

Energy Menu:

The energy interface will show the power generation curve everyday. Today KWH and Total KWH are also show in this page.

HTB1av2uLVXXXXbtXXXXq6xXFXXXH

 

AC Output Current Waveform and PF Test Of 2000W Model

Tested 2000W model at nearly full load,Output current waveform shows good pure sine wave in oscilloscope,PF value also shows in good result,99.8% PF value.
 
QQ20160607192549
 
Advantages:
 1. Advanced patented technology,  MPPT efficiency is higher.
2. High-quality imported components, more stable quality, lower failure rate. Significantly longer life, more than 10 years.
3. Each inverter need to pass twice testing (20 hours) before leaving factory.
4. Warranty: 2 years of free maintenance and replacement, lifetime technical support.
5. Low cost and easy installation .
6. Free combination. 
7. Combination of SGPV does not interact.
8. Improving the efficiency of the entire solar power system.
9. Low power consumption.       

wind1-4

wind 1

wind 2

 
 
 
 
 
 
 
PushAuction