BGM Pro Rear Wheel Bearing for Eibar Lambretta LI 125 (Serie 2)
This component will fit the Innocenti Lambretta J 125.
If you require this part for a model that is not in the listing title or listed below we strongly advise you to contact us first to avoid any disappointment or fitment issue.
Product Description
Special rear wheel bearing from BGM PRO for the Lambretta engines of the series 1 to 3.
The special bearing, manufactured only for the Lambretta, has an integrated shaft seal. The BGM bearing does not require the shaft seal ring to be mounted, the high-quality sealing ring (NBR) is already mounted.
The bearing clearance is adapted to the mounting characteristics of the Lambretta engines. It is still sufficiently large in the completely assembled condition without the bearing running too tight. The high-quality sealing in combination with the exact tolerance of the bearing clearance create the solid basis for a very long service life.
MOUNTING
To mount the bearing, heat the motor housing (hot air gun) and cool the bearing (ice compartment or ice spray). As soon as the bearing is mounted and has warmed up due to the hot motor housing, the main shaft can be inserted. The slightly warmed inner ring of the bearing also makes it easier to install a main shaft from Casa Lambretta that is much tighter than the original one.
When subsequently mounting the bearing shield, the permissible torque must be observed.
Due to the design, the slim M6 stud bolts incline outwards if the tightening torque is too high and can thus damage the motor housing.
As a guide value for the four stud bolts, 4.7 - 5.2Nm are given.
IMPORTANT DELIVERY INFORMATION:
Please note, the products listed here and within our Racing Planet UK eBay shop are located in our warehouse in Germany and will be ordered in and shipped from our UK warehouse and therefore has 3 day handling time however we are very confident that your order will be with you within the estimated time shown for delivery.
Racing Planet UK - Leading Supplier of Scooter Parts
Racing Planet UK are a leading supplier of scooter parts for a vast range of makes and models from Chinese Scooters to Piaggio's, Peugeot’s, Honda, Vespa, Aprilia, Yamaha's and many more., as well as low capacity scooters we also specialise in Maxi-Scooters and road legal geared bikes. We stock brands such as Malossi, Polini, Airsal, Tecnigas & Naraku to name a few and we specialise in parts for Peugeot, Kymco, SYM, Baotian, Piaggio, Yamaha, Honda, Aprilia and many many more.
Why choose us?
We stock a massive range of products from spark plugs, CDI units, rectifiers to pistons, cylinder kits, exhausts plus much much more. We supply standard replacement parts and modification aftermarket parts from leading suppliers and we are always adding to the range. We trade from commercial premises with customer service available face to face, on the telephone or by email. We aim to provide the best possible service so if you need assistance or you do not see what your looking for send us an email through eBay and we'll see if we can help.