2000W Hydroelectric Generator Hydro Power 220V Single Phase Water Kaplan Turbine

Generator Features:

1.low start-up torque, wind energy utilization high;

2.small size, beautiful appearance, low vibration;

3.human friendly design, easy installation, maintenance and repair;

4.permanent magnet generator rotor using patented alternator, together with the special stator design, effectively reduce the generation of resistance torque, while allowing more wind turbines and hydroelectric generator has good matching characteristics, the unit runs reliability



Model: ZL-2000w
Power: 2000 W
Head: 2-5M
Flow rate: Q.MAX 0.08m3/s
Phase: single phase
Voltage: 220 V
Tree: 8.7 A
Rated speed: 500-1500rpm
Frequency: 50 Hz
Weight: 40 kg
Material: cast iron
 
 
Product structure of axial flow hydro generator:
(1) Bearing cover
(2) Upper cover
(3) Bearings
(4) Rotor
(5) Stator coil
(6) Motor barrel
(7) Lower seat
(8) Bearings
(9) Oil seal
(10) Casing
(11) Water cone
(12) Water guide cover
(13) Runner
(14) Spring pad
(15) Nut
(16) Split pin
 

Product Description:

 

 



 

 
 
Way of working
Axial flow small hydro-generators are mainly used in places where water flow drop is relatively low, such as small rivers and small creek.
The axial flow small hydro generator is mainly composed of a generator and an impeller coaxial.
 

Working principle and installation method:
 
First, plan the installation site, generally next to it, or where there are rocks underneath. Use concrete and stone to build the inlet channel; use a wooden board to make a switch sluice; use a wire mesh to make a garbage baffle to form the water inlet system.
 
Use a concrete and stone to build a spiral flat channel according to the model, so that the water forms a vortex and drives the impeller to rotate.
 
Under the spiral plane, a small, large, horn-shaped draft tube is built, which is mainly used to make the water form a suction force inside, and attract the impeller downward, thereby generating strong power to drive the generator.
 
Therefore, the power of the generator is mainly from the draft tube, and the length of the draft tube is the drop of the water flow, called the water head. Small axial flow hydro generators generally work between 1 and 6 meters of water head.

 
 
 
PushAuction