Channels | 2 | 4 | 8 |
Power (all channels driven) 8 Ω 4 Ω 70 V 100 V | 200 W 200 W 200 W 200 W
| 200 W 200 W 200 W 200 W
| 200 W 200 W 200 W 200 W
|
FlexAmp Technology | Allows each pair of amplifier channels to deliver up to 400 W total power, in any ratio |
Frequency response at 8 Ω | 20 Hz – 20 kHz +/- 0.5 dB |
Signal to Noise | > 103 dB |
Input sensitivity | 1.23 V (+4 dBu) |
Gain at 8 Ω | 30.0 dB |
Output circuitry | Class D |
Input impedance | >10k, balanced or unbalanced |
Maximum input level | 12.3 V (+24 dBu) |
Cooling Type Operating temperature range | Forced air cooling, thermally regulated fan speed, side/rear-to-front airflow Maximum: -10° - 50° C, recommended: 0° - 35° C, reduced performance above 40° C
|
Connectors Input connectors Remote connectors Output connectors | Two 3.5mm Euro, 3-pin (green) One 3.5mm Euro, 5-pin (black) One 5.0mm Euro, 4-pin (green) | Four 3.5mm Euro, 3-pin (green) One 3.5mm Euro, 5-pin (black) Two 5.0mm Euro, 4-pin (green) | Eight 3.5mm Euro, 3-pin (green) One 3.5mm Euro, 5-pin (black) Four 5.0mm Euro, 4-pin (green) |
Front panel indicators | Power, signal (per channel), limit / mute / protect (per channel) |
Rear panel indicators | Bi-Color LED signal / limit/ mute/ protect |
User-configurable operating modes (per channel) | DIP switch selectable, low impedance 4 Ω or 8 Ω, high impedance direct drive 70 V or 100 V |
Remote I/O | Remote standby, amplifier status enunciation on 3.5 mm connectors |
Highpass filter | 80 Hz DIP switch engaged per channel |
Dimensions | 1.75 in x 19 in x 14.8 in (44 mm x 483 mm x 377 mm) |
Net weight | 7.7 lb (3.5 kg) | 9.3 lb (4.2 kg) | 12.8 lb (5.8 kg) |
Shipping weight | 12.3 lb (5.6 kg) | 13.9 lb (6.3 kg) | 17.4 lb (7.9 kg) |
Power requirements | Universal power supply (with active power factor correction), 100 – 240 VAC, 50 -60 Hz |
Agency approvals | UL, CE, RoHS/WEEE compliant, FCC class B (conducted and radiated emissions) |
Carton contents | IEC cable, quick start guide, connector pack |