ERA uPVC Window Handle Cockspur Window Handle White Double Glazed 

This is 12mm and 21mm stag height handle.

The Charisma Cockspur is a contemporary handle with superb styling for PVCu, Timber or Aluminium Casement Windows. 

Features 

Designed with a slender grip, the cockspur has been engineered with a simple release button Universal handle suitable for replacing on existing Cockspur handles Available in two nose heights with a selection of wedges to suit alternatives windows 

Suitable for PVCu, Timber and Aluminium Casement Windows 

Available finish:

• Polished Gold
• White 
• Black 

Tested to the highest technical standards What's in the Pack? 1 x ERA Cockspur Handle 1 x Key 2 x Screw Cover Caps 

Dimensions: 

• Distance between screw holes: 58mm (outer holes), 38mm (inner holes) 
• Handle length: 166.5mm Handle width: 41.8mm 
• Backplate width: 17mm 
• Backplate length: 77mm

Left or Right Hand? 

First check the hand of your handle, for a top hung window that opens out - if the long part of the handle points to the left and the little spur points down you will need a left hand, if the long part of the handle points to the right and the little spur points down you will need a right hand. 

For side opening windows - if the long part of the handle points down and the little spur points to the right then you need a left hand handle, conversely if the long part of the handle points down and the little spur points to the left then you need a right hand handle. 

Please refer to the diagram in our gallery. 

Which backset will I need? To measure the backset (stack height) you will need to measure from the baseplate (the part that sits flat against the window) to the underside of the handle nose. Please refer to the diagram in our gallery. 

How to remove a Cockspur window handle: Remove the screw cover cap to reveal two screws, unscrew and remove Move the handle to the open position which will show another two screws, remove as before 

Once all four screws have been removed the handle should come off How to fit a replacement Cockspur window handle: Line up the new handle with the old screw holes.

Put the new screws in and secure into place.

Once the screws at the top and bottom of the base are fitted put the screw cover (if applicable) over the screw hole at the top of the base.