PACKAGE CONTENT:( NOT include Raspberry Pi Pico.)
Pico-GPS-L76B x1
GPS Antenna x11
GNSS Module Based On L76B, Designed For Raspberry Pi Pico
ThePico-GPS-L76Bis a GNSS module designed for Raspberry Pi Pico, with multi satellite systems support including GPS, BDS, and QZSS. It has advantages such as fast positioning, high accuracy, and low power consumption, etc. Combined with the Raspberry Pi Pico, it's easy to use global navigating function.
Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards
Multi satellite systems support: GPS, BDS, and QZSS
EASY, self track prediction technology, help quick positioning
AlwaysLocate, intelligent controller of periodic mode for power saving
Supports D-GPS, SBAS (WAAS/EGNOS/MSAS/GAGAN)
UART communication baudrate: 4800~115200bps (9600bps by default)
Onboard battery holder, supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts
4x LEDs for indicating the module operating status
Wiki English manual (Raspberry Pi Pico C/C++ and MicroPython examples)
Wiki: www.waveshare.com/wiki/Pico-GPS-L76B
GNSS | |
Frequency band: GPS L1 (1575.42Mhz) BD2 B1 (1561.098MHz) | Channels: 33 tracking ch, 99 acquisition ch, 210 PRN ch |
C/A code | |
SBAS: WAAS, EGNOS, MSAS, GAGAN | |
Horizontal position accuracy (autonomous positioning) | <2.5m CEP |
Time-To-First-Fix @ -130dBm (EASY enabled) | Cold starts: <15s |
Warm starts: <5s | |
Hot starts: <1s | |
Sensitivity | Acquisition: -148dBm |
Tracking: -163dBm | |
Re-acquisition: -160dBm | |
Dynamic performance | Altitude (max): 18000m |
Velocity (max): 515m/s | |
Acceleration (max): 4g | |
OTHERS | |
Communication interface | UART |
Baudrate | 4800~115200bps (9600bps by default) |
Update rate | 1Hz (default), 10Hz (max) |
Protocols | NMEA 0183, PMTK |
Power supply voltage | 5V |
Operating current | 13mA |
Overall current consumption | <40mA@5V(Continue mode) |
Operating temperature | -40℃ ~ 85℃ |
Dimensions | 52 × 21mm |
Onboard Female Pin Header For Direct Attaching To Raspberry Pi Pico
Multi Satellite Systems Support: GPS, BDS, And QZSS
Augment System Is Aimed At Improving The Accuracy, Integrity, Reliability, And Availability Of Positioning And Navigation
Supports Augment Systems Including D-GPS, SBAS (WAAS/EGNOS/MSAS/GAGAN)
L76B module
Battery holder supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts
GNSS antenna connector
Raspberry Pi GPIO header
Standby mode switch
Backup mode wakeup button
RT9193-33 power chip
Status indicators RXD/TXD: UART TX/RX indicator PPS: GPS status indicator PWR: power indicator