Brand new, but no box.

***100% GENUINE***

18v

No battery or charger

Top of the range.

Australian version- not imported.

The following is taken from the internet.

Makita DTD172Z 18V Li-ion Cordless Brushless 4-Stage Impact Driver - Skin Only

Makita has a tradition of innovation in the cordless impact driver  category, and the 18V LXT Brushless 4-Speed Impact Driver (DTD172)  sets new standards. The DTD172 offers users four speeds, as well as  Makita’s exclusive application modes for increased fastening control.  The unique application models use the brushless motor’s electronic  controls to find the best balance of speed and torque for each  application for more efficient fastening. Another precision setting is  Tightening Mode (T-mode), which downshifts and reduces rotation and  impact speed prior to driving the screw into place, and is engineered to  minimize screw thread stripping, screw breakage and damage to work.  The DTD172 delivers industry-leading performance in a compact and  ergonomic design.

Added features include the one-touch 4-speed power selector button  under the chuck, which enables one-handed speed changes, and  reverse rotation auto-stop mode which stops rotation and impact  when the fastener is loosened adequately to help prevent over loosening and dropped fasteners. Item comes in a plain white box.

Features:

Slim Tool Body with a re-designed head that is slimmer than the previous  model enabling the tool to have greater access to tight corners or confided spaces

One Touch Bit Installation has been designed to prevent  the bit from unexpectedly falling off. A more effective mechanism has been  designed increasing the strength of the chuck with out increasing the resistance  required to install a bit

Enhanced Anvil Holder; material change from needle bearing to ball bearing  provides reduction of bit wobbling. Providing more stability and control when  fastening

Quick Change Selector; one touch mode selector located above the trigger  allows the user to jump between modes single handed. Quickly changing between  modes improves efficiency as you no longer have to take your hand off the tool

Light Mode enables the tool to be used as a torch in dark environments. To turn  the light on set the F/R change lever to the neutral position and pull the switch  trigger. To turn off the light pull the trigger again

4 Optimised Application Modes; T-mode 1 and 2 for  self drilling screws in both thick and thin sheet metal. Wood mode for fastening  long wood screws. Bolt mode with rotation auto stop for tightening / loosening  bolts

4-Speed Power Selection allow the user to adjust the  power, speed and impact rate to suit the fastening application

Specifications:

Voltage: 18V

Drive shank: 6.35mm (1/4") Hex

Max tightening torque:

Max: 180Nm

Hard: 170Nm

Med: 50Nm

Soft: 20Nm

No load speed:

Max: 0 - 3600rpm

Hard: 0 - 3200rpm

Med: 0 - 2100rpm

Soft: 0 - 1100rpm

Impact rate:

Max: 0 - 3800ipm

Hard: 0 - 3600ipm

Med: 0 - 2600ipm

Soft: 0 - 1100ipm

Max capacity:

Standard bolt: M5 - M16

High tensile bolt: M5 - M14

Length: 114mm

Weight: 0.9kg