This sale is for a ALLEN & HEATH MixWizard WZ3 16:2 mixing console. The unit is in excellent operational and cosmetic condition. It is fully tested and is ready to meet your mixing needs.

Buyer to pay calculated shipping via UPS Ground. Local Pick-Up here in Rancho Cordova, CA is welcome.

If you have any questions you can call me by following these directions to get my number from eBay: On the right side of this page under "seller information" click on the blue “contact seller”. Then under "select a topic" click on the circle next to “Other”. Next click on the blue “view phone number"

Specifications are as follows:

MixWizard 3 16:2 Mixer Specifications:

Allen & Heath MixWizard3 16:2 Mixer
  • Performance
  • Maximum output level: XLR +26dBu into 600 ohms max load; Jack +21dBu into 2k ohm max load
  • Internal headroom: Channels +21dB; Mix +23dB
  • Meters: 3 colour LED, quasi peak response
  • Sensitivity: 0VU = +4dBu at XLR output
  • Master meters: 12 segment -30 to +16dB
  • Channel meters: 2 segment -12, +16dB (5dB before clip)
  • Frequency response: 20Hz to 50kHz +/-0.5dB
  • THD+n at +10dBu: 1kHz Channel to mix out < 0.004%
    Crosstalk at 1kHz: Fader shutoff >90dB; Channel mute >100dB; Inter channel >90dB
  • Noise, rms 22Hz to 22kHz: Mic EIN -128dB; Residual output noise < -95dBu (-99dB S/N); LR unity fader mix noise < -83dBu (-87dB S/N)
    Channel HPF: 12dB/octave below 80Hz
  • Mono EQ: HF Shelving, +/-15dB, 12kHz; HM Peak/dip, +/-15dB, 500Hz to 15kHz, Q=1.8; LM Peak/dip, +/15dB, 35Hz to 1kHz, Q=1.8; LF Shelving, +/-15dB, 80Hz
  • Stereo EQ: HF Shelving, +/-15dB, 12kHz; HM Peak/dip, +/-15dB, 2.5kHz, Q=1.8; LM Peak/dip, +/-15dB, 250Hz, Q=1.8; LF Shelving, +/-15dB, 80Hz
  • Power supply: Internal 100-240V, 50/60Hz auto sensing, IEC input; External Input for optional MPS12 backup supply; Power consumption: 35W max; Mains fuse: T630mA L 20mm
  • Mechanical
  • Free standing dimensions: W 507 (20") x D 530 (20.9") x H 194 (7.7")
  • Rack mounted; W 483 (19") x D 122 (4.8") x H 444 (17.5") 10U Underside connectors
  • Rack mounted W 483 (19") x D 193 (7.6") x H 497 (19.6") 11.2U Rear connectors
  • Weight; 10kg (22lbs)
  • Connections:
  • Mono channel:
  • XLR balanced pin 2 hot Sensitivity -60 to +10dBu
  • TRS balanced, tip hot Sensitivity -40 to +10dBu
  • Pad out (MIC) 2k ohm
  • Pad in (MIC or LINE) >10k ohm, -20dB
  • Max input level +30dBu
  • XLR phantom power +48V, on/off
  • Stereo channel:
  • ST1,3 TRS unbalanced >10k ohm, -16 to +20dBu
  • ST2,4 TRS balanced >10k ohm, -16 to +20dBu
  • Stereo returns:
  • ST1(5) TRS balanced >10k ohm, -6 to +20dBu
  • ST2(6) TRS unbalanced >2k ohm, -2 to +20dBu
  • Inserts:
  • Channel TRS, tip send, ring return, 0dBu
  • Output TRS, tip send, ring return, -2dBu
  • L, R, M outputs: XLR balanced pin 2 hot <75 ohm, +4dBu, +26dBu max
    Aux 1-6 output: TRS impedance balanced <75 ohm, -2dBu, +21dBu max; Electronic balance option <75 ohm, +4dBu, +26dBu max
    Direct out: TRS impedance balanced <75 ohm, 0dBu, +21dBu max
    AB out TRS impedance balanced <75 ohm, -2dBu, +21dBu max
    Headphones: TRS, tip L, ring R, 30 to 600 ohm headphones recommended
  • Lamp: 4-pin XLR max 12V 5W lamp