Item Description

Package include:

1 x Blower motor

For the following years and models:

Mercedes-Benz C220 1997-1996 HVAC Blower Motor Front
Mercedes-Benz C230 2000-1996 HVAC Blower Motor Front
Mercedes-Benz C280 2000-1996 HVAC Blower Motor Front
Mercedes-Benz C36 AMG 1997-1996 HVAC Blower Motor Front
Mercedes-Benz C43 AMG 2000-1998 HVAC Blower Motor Front

Mercedes-Benz CL500 2000-1997 HVAC Blower Motor Front
Mercedes-Benz CL600 1999-1997 HVAC Blower Motor Front
Mercedes-Benz CLK320 2003 Old Style HVAC Blower Motor Front
Mercedes-Benz CLK320 2002-1997 HVAC Blower Motor Front
Mercedes-Benz CLK430 2003 Old Style HVAC Blower Motor Front
Mercedes-Benz CLK430 2002-1999 HVAC Blower Motor Front
Mercedes-Benz CLK500 2003 Old Style HVAC Blower Motor Front
Mercedes-Benz CLK55 AMG 2003 Old Style HVAC Blower Motor Front
Mercedes-Benz CLK55 AMG 2002-2001 HVAC Blower Motor Front

Mercedes-Benz SLK200 2004-2003 HVAC Blower Motor Front
Mercedes-Benz SLK230 2004-1998 HVAC Blower Motor Front
Mercedes-Benz SLK32 AMG 2004-2002 HVAC Blower Motor Front
Mercedes-Benz SLK320 2004-2001 HVAC Blower Motor Front

How do you know if your blower motor needs to be replaced?

1.Weak Airflow from the Vents.

2.No Airflow at All.

3.Unusually High Energy Bills.

4.Strange Sounds.

5.Overheating.

6.Unusual Noises or Vibrations When Blower Is Turned On.

7.Smoke or smells.

Note
-Please make sure that this can be used on your vehicle before purchasing this product.
-If you need help with this, please write us an email, we will be happy to advise you.

How to install Blower motor?

Tools：

Socket wrenches

Screwdrivers

Hub puller

Smartphone

How to Install a Blower Motor

1.Shut off the electrical power supply to the blower motor.

2.Remove the panel covering the blower motor on your furnace.

3.Locate and remove the bolts or screws securing the motor housing to the frame.

4.Take pictures with your phone of the wires connecting the motor to the furnace. The pictures will guide you when you reconnect everything.

5.Disconnect motor wires from main unit.

6.Slide out motor housing.

7.Loosen the set screw next to the motor shaft.

8.On the back side of the motor, loosen screws and capacitor leads.

9.Unscrew hub puller until it can fit over the motor shaft.

10.Tighten bolts on sides of hub puller until it grips the shaft firmly.

11.Turn the hub puller clockwise until the motor comes loose. Support the motor while you do this.

12.Carefully move the motor out of the housing.

13.Undo screws on motor so that you can take off the belly band.

14.Position the new motor so that its rotation matches the direction that the fan moves the air.

15.Reattach motor belly band.

16.Center the motor within the fan wheel and connect bolts and capacitor leads on back.

17.On the other side, reconnect the motor set screw.

18.Slide motor and its housing back into furnace and secure in place with bolts.

19.Reconnect electrical wires.

20.Restore power to unit and test the new motor.