Pure 1.0 - 16W - UVC system for water treatment
- For better, germ-free drinking water
- For connection to a well or water supply, also suitable for small pools and ponds
- With function display
- Up to 10 bar operating pressure
Pure 1.0 - Made in Germany
The Pure 1.0 UVC system with 16W electrical output is for better, germ-free drinking water for ponds up to 10m³ with a max. Flow rate up to 2.5m³/h and up to 10 bar operating pressure.
The ballast has an on/off switch and operating lamp.
Technical specificationsGenerally:
Electrical power: 16 W
Max. Flow rate: 2.5 m³ / h
Temperature (max.): 40° C
operating pressure: max. 10 bars
Weight: 2.5kg
Reactor:
Material: stainless steel 1.4571
Brand: V4A
Diameter: 48mm
Length: 450mm
Connections: 2 x 1 inch (AG / ext. thread)
Surface: electropolished
Ballast:
Type: electronic
Degree of protection: IP 65
Dimension (LxWxH): 120x80x55 mm
Electrical connection:
Voltage: 230 VAC (optionally available for 12 or 24 VDC)
Frequency: 50Hz
Power Consumption: 16W
Fusing: 10 A
Ultraviolet light in the wavelength range from 180 to 280 nm (nanometers) has a germ-reducing effect. The cell structure of bacteria, viruses, algae and other microorganisms is permanently damaged by UVC radiation of 254 nm. The genetic material (DNA) is modified in such a way that the microorganisms can no longer reproduce and then die.
The UVC lamps used in this device radiate at exactly this wavelength. Long dwell times are not required for UV disinfection, as the processes take place in fractions of a second.