2--Voltage:20V-72V(max full charge 84V)
3--Converter dimension:75mmx25mmx63mm
4--Two or Three batteries discharge at the same time
5--30A/40A:Input XT60H/XT90/Red T/PP30/Bullet Male Plug
Output XT60H/XT90/Red T/PP30/Bullet Female Plug
Charge Plug 2.1DC plug (Please contact us if you need other plug)
6--Can connect One battery,two batteries,three batteries,Capacity can be different, But Batteries Voltage and battery type must need same.
7--30A: For 250W-700W Motor,Max can fit 30A controller
8--40A: For 750W-1200W Motor,Max can fit 40A controller
Note:Option With Charge Funtion,Batteries BMS must need common port of charge and discharge,Separate port please choose without charge funtion
30A-40A,total max Charge current 5A
Note: Not Applicable!!!
All ebike/Electric scooters and equipment with regenerative braking are not applicable controllers with communication protocols and Inverters are also not applicable！！！
Two Controller not fit too.
If the above models are used, please don't place an order, otherwise any issues arising from this will be the responsibility of the buyer.
1--Electric Bicycle Ebike Dual/Triple Battery Connection Adapter Increase Battery Capacity
The Dual batteries connected in parallel for additional capacity and range, and the switcher can manage the two batteries on your bike.
2--Support two or three batteries to simultaneously supply power to your electric bicycle intelligently and balancedly.
3--Do not confuse the positive and negative connectors on the dual battery switch. Make sure that the power of both batteries is turned off before connecting.
DESCRIPTION:
Double/Triple Battery Balance Discharger can manage two or three batteries packs which fixed on your bike, low power，Consumption design ,real-time detect the voltage of both two battery packs, Battery on-line check .This module can make batteries to discharge together to power the ebike , it will auto compare thevoltage of each battery and adjust the current output for each battery.
WORKING PROCESS:
1--MCU monitor voltage of both batteries in real time and send the volatage valueby UART if UART interface is available
2--Auto Battery on-line detecting. Switch to the battery and make power outputif only one battery was connected with this module.
3--If the voltage of two/three batteries is not same, one is lower and other is higher ,module will use the battery with higher voltage to discharge first till twobatteries voltage approaching similar
4--Two or three batteries will discharge together when two batteries voltage is similar.
