About this item
【Split Design, Fit for Outdoor & Indoor】The solar shed light and solar panel are separated, and the waterproof wire length is 9.84 feet. This solar light can be used indoors and outdoors, such as a shed, chicken coop, gazebo, balcony, garage, barn, loft, backyard, basement, home, garden, yard, patio, hallway, park, porch, corridor, driveway, pathway, front door, deck, tent, van, camp, tools room, storage room, etc.
【3 Modes and 3 Timers Setting】The solar shed lights indoor with switch uses only the IR remote to control: a.power ON/OFF; b. 3 levels of brightness (100%, 50%, and 25%); c. timing (3/5/8 hours). (⚠NOTED⚠: The solar light only lights up at night, if you want to use it during the day, please cover the solar panel.)
【2 Head Lights & Angle Adjustable】Shed solar light with remote. With a hook, you can adjust the angle for your lighting needs. Built in 30 white LEDs, it can provide enough illumination for a wide area. Also, the solar panel can be adjusted to 120° left and right, and 180° up and down, ensuring that it can absorb enough sunlight.
【IP65 waterproof & Easy to Install】We included all accessories for easy installation. Solar Panel need installing at areas to receive direct sunshine. It could be fixed with cable ties or screws; placed in horizontal or vertical. The solar panel and lamp are detachable with water-proof connectors, it allows to install lamp at indoor but install solar panel at outdoor.
【Long Working Time】Powered by our high efficient solar panel and 2200mAh rechargeable battery. Can light up to 12 hours in summer and 8 hours in winter after fully charged. Charging time: 4-6hours. No oil, no fires, no pollution and no electricity bill.
Instructions for use.
Installation of the solar chandelier: first install the photovoltaic panel on a wall where the sun can easily reach it, and then hang the chandelier where you want to illuminate it.
Use of the remote control:
1、ON/OFF: Turn the light on/off.
2、Brightness: three levels of adjustment, 25%, 50%, 100%.
3、3H: 3 hours of darkness timer; 5H: 5 hours of darkness timer; 8H: 8 hours of darkness timer.
Equivalent to 50W bulb brightness when it is bright and sunny.
Automatically adjusts to 20W bulb brightness in rainy weather.
Description:
1, 360℃ large angle, automatic charging during the day, automatic lighting when it is dark.
2, 3 levels of adjustment, brightness 25%, brightness 50%, brightness 100%.
3, full can be bright 18 hours, remote control can be set brightness hours.
4、With high power crystalline silicon solar panel, 6 hours of sunny weather can be fully charged, full charge can light up two overnight, brightness enough.
5、Polycrystalline silicon solar panels, high light conversion rate, fast charging speed, long service life.
Note: After a long period of use, if you find that the brightness is darker than before, detect the back of the solar panel and replace the battery by yourself.
2Head:
2 * LED hanging lamp
1 * solar panel with 3M extension cable
1 * remote control
4 * expansion nail
1 * Instruction Manual
FAQ Q: Why does the solar shed pendant light not work? A: Please check as the following: 1. Make sure the switch (on the back of the panel) is on. 2. Please point the remote control at the bulb and the remote control range is within 16.4FT 3. Only light up at night, and keep off during the day, because it will charge from the sunlight. 4. Make sure no other strong light shining on it at night since the solar light has a built-in light-operated sensor element. 5. Installed it with no shade covering the solar panel from Trees, Buildings, and far from exterior lighting sources like street lights. Q: Does the solar powered shed light work during the day? A: No, Like most other solar lights, this solar shed light just light up at night. Q: Do I have to use the remote to operate my shed light? A: Yes, according to some of our customer's request that they want to control the shed light themselves. So the outdoor solar shed light isn't auto on/off, and it must be used with the included remote. How to Use the Solar Shed Light? Step 1. Before installation, please press the button on the back of the solar panel for charging from the Sun. Cover the solar panel, you will see the light will flash once, that is, the shed light is "On". Step 2. Install the solar panel anywhere the solar light can absorbe enough sunlight. Step 3. Then you can at night use the remote for ON/OFF, Brightness Adjustable, or timer selection. Notes: 
