Fane Sovereign 15-500 Bass Speaker
The famous Fane Sovereign 15-500 is a 500 watt (2000 watts peak) 8 Ohm driver unit.
Can be used in a PA sound system with a horn and crossover or for bass guitar in a suitable enclosure.
These were removed from a pair of PA enclosures. The enclosures were past their best, but the speakers are A1.
I can remove the cabling from the terminals if required - just message me if you buy one or both.
Copied from Fane’s website:
Electro Acoustic Specifications | |
Nominal Chassis Diameter | 15" / 381 mm |
Impedance | 8 Ω |
Power Handling | 500 W (A.E.S.) |
Peak Power (6dB Crest Factor) | 2000 W (A.E.S.) |
Usable Frequency Range (-6dB) | 40 Hz - 4 kHz |
Sensitivity (1W - 1m) Wideband | 99 dB |
Moving Mass (inc. Air Load) | 97.6 grams |
Minimum Impedance (Zmin) | 6.2 Ω |
Effective Piston Diameter | 15.03" / 381.76 mm |
Magnet Weight | 80 oz |
Magnetic Gap Depth | 0.39" / 9.90 mm |
Flux Density | 1.1 Tesla |
Coil Winding Height | 0.70" / 17.78 mm |
Voice Coil Diameter | 3.0" / 76.2 mm |
Speaker Type | Bass Driver |
Speaker Series | The Sovereign Series |
Program Power | 1000 W (A.E.S.) |
Sensitivity (1W / 1m) Working band |
Materials of Construction | |
Coil Former Material | Glass Fibre |
Voice Coil Material | Copper |
Magnet Material | Ferrite |
Chassis Material | Pressed Steel |
Cone Material | Curvilinear Paper |
Surround / Edge Termination | Polyvinyl Damped Multi Roll Linen |
Dust Dome Material | Paper |
Connectors | Solder Tag |
Polarity | Positive voltage at red terminal causes forward motion of cone |
Baffle Hole Diameter F/M | 13.85" / 351.79 mm |
Baffle Hole Diameter R/M | 13.85" / 351.79 mm |
Gasket Supplied | Front & Rear |
Outer Fixing Holes | 8x ø 6.35 mm on 14.56" / 369.2 mm PCD |
Inner Fixing Holes | Not Applicable |
Depth | 6.41" / 162.81 mm |
Weight | 16.20 lb / 7.7 Kg |
Recommended Enclosure Volume | 1.76 - 4.41 cu ft / 50 - 125 Litres |
I have two of these. Postage will be quite high as they are heavy as can be seen in the table above.
Thanks for looking.