The Revox B 790, a Quartz-controlled direct-drive turntable with a Linear tracking tonearm, stands out for its exceptional engineering and precision. The tonearm features servo electronic follow-up control and electronically controlled, pneumatically damped lowering, ensuring accurate and gentle stylus placement. Noteworthy is the electronically muted output until the stylus contacts the record, minimizing any unwanted noise during setup. With turntable speeds at 33.33 and 45.00 rpm and a speed accuracy of +-0.01%, the B790 guarantees precise playback. The 4-digit LED readout, quartz precise speed indication, and low wow and flutter (better than 0.05%) contribute to its high-quality performance. Boasting a signal-to-noise ratio better than 65dB, the Revox B790 stands as a testament to its commitment to delivering exceptional audio quality in the realm of vintage turntables.
The revox is in good used condition. The turntable itself is in good condition. Some usage marks across. The dust cover does not open and close fully due to one of the hinges being broken. The dust cover can be removed manually.
The turnable plays good. Very stable and speed is accurate
Is sold without a element.
Specifications:
Turntable drive: Quartz-controlled direct drive
Speeds: 33,33 and 45 rpm, crystal accurate
Speed accuracy: ±0,01 %
Speed indication: 4-digit LED readout, quartz precise
Manual fine adjustment: ±7%
Platter diameter: 313 mm (12,32 inch)
Platter weight: 1,1 kg (2 lbs 7 ozs)
Run-up time: better than 2 sec. at 45 rpm
Braking time: better than 1,5 sec. from 45 to 33,33 rpm
Wow and Flutter: better than 0.05 % (weighted); 0,1% (unweighted)
Signal-to-noise ratio: better than 65 dB
Rumble to signal ratio:
A weighting: better than 48 dB
A weighting +20 Hz high-pass: better than 51 dB
Bweighting: better than 68 dB
Transmission characteristic for rumble measurement: Replay response -3 dB at 20 Hz
Tonearm: Linear tracking tonearm with servo electronic follow-up control
Tangential tracking angle error: less than 0.5 degrees
Tracking force: adjustable of 5... 20 mN (0.5... 2 p)
Tonearm lowering: electronically controlled, pneumatically damped
Muting: electronically muted, until the stylus contacts the record
Tonearm follow-up: Opto-electronic sensing with LED as light source, servo-electronics and DC motor
Run-out switch: automatically activated via servo-electronics
Operating controls:
Turntable drive:
3 tactile feedback keys for 33,33 and 45 rpm as well as for variable speed operation
Tonearm:
3 tactile feedback keys for fast inward or outward movement plus lowering and lifting of the pick-up cartridge; cartridge illumination built-in
Automatic functions:
-Swinging the tonearm support in: Platter stsrts to rotate at the selected speed
-Swinging the tonearm support out:
-Immediate lifting of the cartridge
-Tonearm returns to start pposition (run-in groove of a 12 inch disk)
-Electronic braking of the platter
Components: 29 ICs, 30 transistors, 24 diodes, 1 LED, 4 seven segment displays and 3 bridge rectifier
Dimensions (W x H x D): 452 x 142 x 382 mm
Weight: 11 kg
Voltage: 220V
Cables : Not included
Working condition: Fully Working (See pictures for the cosmetic condition of this lot)
Missing or damages: Medium Usage Marks