In the construction process, PVC pipes and metal wire pipes are often blocked due to various reasons, and the wire box cannot be found. The location of the blockage point is difficult to determine, and the excavation area is large, causing high labor intensity for workers and even damaging the structure, which consumes a lot of manpower and financial resources. After several scientific and technological personnel developed a high-manufacturing pipe blockage detector. The product, pipe wire blockage detector, has been successfully developed. This instrument adopts the principle of microwave emission and is affected by external inductive interference. It can be used in PVC pipes and any electrical wires with a length of more than 50 centimeters. A 50 centimeter thick wall can clearly find the blockage point, with a low detection rate. It has a fast search speed, simple operation, stable performance, low power consumption, long service life, and labor-saving for maintenance without dismantling the pipeline.
Usage :
Please handle the handle tightly and follow the instructions in the legend to roll the wire reel, collect and release the wire.
Thread the signal line and transmitter into the pipeline until the signal line cannot move further, and position the probe at the blockage point.
Turn on the power switch of the signal generator, and the green indicator light will turn on.
Turn on the signal switch and receive the signal to hold and detect the general direction of buried pipe. If it is blocked, then press the reset button on the side of the probe head, the receiver will hear an alarm sound, and the maximum sound signal point is the blockage point. Mark out the blockage point with red pen and cut out the outer shell to pass through it.
Under normal circumstances, if the testing distance is shortened, it indicates that the battery is low.
you can charge it once in a while. The red light indicates charging, and when it turns green, it indicates that it is fully charged. The receiver and transmitter can be charged at the same time within 2 hours. Because when being fully charged, it will not stop charging itself. When being charged, please do not pull out the charging cable from its socket during charging.
To prevent damage caused by moisture or corrosion, please use a waterproof case to protect it before using.
1.WATERPROOF PROBES: The pipeline blockage detector is equipped with 8 waterproof probes, which can cope with various environments and has a long service life.
2. ACCURATE LOCATING: This kit is mainly used to accurately locate the location of pipeline blockages and remind you through a buzzer, stable and reliable.
3. ABS HOUSING: The blockage tester shell is made of excellent ABS material, which is impact resistant, scratch resistant, and does not deform.
4. DETECTABLE PIPES: The pipeline blockage scanner is suitable for detecting steel, iron, and PVC pipeline, to prevent large scale blockage of pipelines.
5. BUILT IN BATTERY: Both the plugging tester and receiver are equipped with 1500mAh batteries, which can be used anytime, anywhere.
Specification:
Item Type: Pipe Blockage Tester
Material: ABS
Plug Voltage: 100-240V
Receiver Power Supply: 1 x 1500mAh Battery (built in battery)
Plugging Tester Power Supply: 1 x 1500mAh Battery (built in battery)
Cable Length: Approx. 30 meter / 98.4ft
Sensing Area: Accurate to 5cm / 2in
Package List:
1 x Plugging Tester
1 x Receiver
8 x Probes
8 x Probe Protection Cases
8 x Probe Sleeves
8 x Heat Shrink Tubes
8 x Diodes
1 x Charger
1 x Connection Wire
1 x Red handle
1 x User Manual (English)
Shipping:
1. Item will be shipped out within 5 business days after the payment.
Please check and make sure your address is correct before payment. (In order to make sure you can receive the items successfully, please provide your phone number as well.)
2. Please contact us for further assistance if you don't receive the item on time. (Before opening up any Item not received dispute/claim, please contact us for a full refund if you don't get the package 35 days after your cleared payment.)
Warranty:
1. All items will be tested or checked carefully and packaged in good condition before sending out to you.
Some faulty items might happen especially after overseas transportation. We offer a replacement warranty within 30 days from the date of receipt.
2. You will be responsible for the returning shipping cost, and we will ship the replacement at our cost after receiving the returned item. Please contact us for details before sending the item back to us.
Replacement or refund will be issued after the items are received by us.
Feedback:
1. We will automatically leave you a positive feedback after receiving your payment.
2. Your positive feedback is highly appreciated and very important to us.
3. If anything found less satisfactory, please kindly contact us for assistance first. We promise we will provide prompt and satisfactory solution to you. Your 100 satisfaction is our greatest goal here.
4. Every email / message will be responded within 24 hours. If no response within 24 hours, please kindly resend the message / email. Sometimes it might get filtered as a spam or our office is closed for weekends and public holidays.
Customs Duty:
1. Import duties, taxes and fees are not included in the commodity price or freight, these fees are collected by your country's customs. Buyers need to pay import duties themselves, which is also eBay's regulations.
2. Please check with the customs of your country/region before purchasing to determine these additional customs fees.