LED Round Ceiling Fan Light 21.6" Modern 3 Color Change Lamp Remote Control

Specifications:

Style: simple modern style

Applicable space: living room dining room kitchen study bedroom small bedroom meeting room small living room other /other

Whether the light source has a light source: with light source

Voltage: 110V, 60HZ

Light body material: Acrylic

Shade main material: PMMA high transmittance lampshade

Light source type: LED

Craft: Openwork carving

Irradiation area: 15m2-30m2

Shade shape: round

Shade auxiliary material: PMMA high transmittance

Light body auxiliary material: ABS hardware chassis

Smart type: does not support intelligence

Whether intelligent control: Yes

Control type: remote control, (one fire line, one neutral line)

Number of accessories: 10

Ceiling light type: wrought iron ceiling light

Fan type: decorative fan

Power: 40W
Light source: white, warm yellow and yellow adjustable
Wind speed: 3 kinds of adjustable wind speed

Item size:

Installations:

1. When installing, first cut off the power supply and determine the installation plan and the weight of the ceiling.

2. Drill the mounting holes into the ceiling according to the mounting holes of the hanging plate, insert the expansion rubber plug, and fix the hanging plate to the wall with self-tapping screws. Ensure that the external power cord passes through the lamp body entry hole and that the installation is secure. (Figure 1)

3. Connect 110V mains to one end of the helvetica block, connect the fire wire to L, and connect the neutral wire to N. Pay attention to the wire contact when wiring, and the copper wire at the end is not exposed. (Figure 2)

4. Fix the hanging plate to the ceiling, move the lamp body to the ceiling, align with the hole of the hanging plate, and screw it into the screw. (Figure 3)

5. After confirming that the installation is correct, the power can be turned on for normal use. (Figure 4)

LED Maintenance Instructions:

1. When replacing the light source, please be sure to turn off the power to avoid electric shock or terminal damage to LEDs and electrical appliances.

2. Please make replacements according to the model on the LED light source board. When wiring, distinguish the positive and negative polarity, and check if the fixing screws are missing and the gasket is short-circuited.

3.The light source in this luminaire is replaced by the manufacturer or its service agent or a person of similar qualification.

Remote control activation instructions: If the remote control cannot control the luminaire,

you need to activate the remote control. Activation method: Turn on the luminaire power switch and press the fan switch key and strong wind button within 5 seconds. After you hear the drip, release it.

Package Includes:

1x ceiling light

1x manual

1x remote controller(no battery included)