OE-level All Systems Diagnostic with Advanced ECU CODING, Make your Work Easier Ever

>>2024 LAUNCH CRP919X NEW FUNCTIONS-- ADVANCED ECU CODING

2024 LAUNCH X431 CRP919X bidirectional scan tool has been newly added the high-level repairs functions: ECU Coding. Prior to this, you may think that only dealers can do the job of “Flash the Hidden Functions”, “Customize OE-Settings”, etc. But from now on, LAUNCH CRP919X obd2 scanner for all vehicles also loads the same advanced ECU coding functions to boost vehicle performance, customize car faster as you needed.

What can LAUNCH CRP919X's ECU Coding Do for You?

• Online Coding: Compatible with VW/ Audi/ Skoda/ Ford/ Lincoin/ Mazda ONLY. LAUNCH CRP919X Scanner can directly access to online vehicle repair data to do high-level repairs. 2024 Newly Add Programmable Module Installation (PMI): For Ford /Lincoin/ Mazda etc. Allowed you to copy data from the original module and install it in the new unit to finish module replacement.
• Offline Coding: Compatible with Benz/ BMW/ Ford/ Mazda /Jaguar /Vauxhall /Opel, etc. Read the code from the original module, and then write the code for the new module.
• Refresh the Hidden Features(Personalization): Make full use of the hidden features to disable annoying functions. Such as: disbale auto start-stop, disable daytime running light, disable safety belt warning, delete transport mode, corrected fuel consumption calculation, etc.
• Component Matching: Matching, relearning, calibration, or initialization adaptive data for certain components after repairs or replacements. Such as: gearbox matching, suspension calibration, seat matching, head light fitting, door and window initialization study, sunroof initialization, injector calibration, etc.
• Customize OE-Settings(Retrofitting/Modification): Alter the pre-programmed options to change how the vehicle behaves originally, activate high-end features, boosted the vehicle performance. Such as: halogen fog lamps retrofitted with xenon fog lamps, different capacity battery retrofit, different size tires retrofit; modifit to add adaptive cruise control, tire pressure monitoring system, reversing radar, etc.

OE-Level FULL Systems Diagnostic, Dealership Level All In One Diagnostic Solution

OBD2 All Systems diagnostic scan tool LAUNCH CRP919X can access all available vehicle modules including but not limited to PCM, ECM, TCM, CTM, EPS, PDM, BCM, TPM, SCCM, RADIO and etc. Supports complete OBD2 function, which is capable of performing all 10 modes of OBD2 tests. LAUNCH CRP919X perform OE-LEVEL All Systems diagnosis, including reading and clearing codes on all vehicle systems and subsystems, showing full live data stream of multiple sensors in graph & text, ECU information, perform active test(bi-directional control), etc.

• AUTO SCAN: Straightforwardly get detailed info about the car, ranging from engine type to where it was manufactured. Then it offers full-system diagnosis and comprehensive codes after finishing scanning and detection.READ CODES: Retrieve detailed information of DTC records to locate problems.CLEAR CODES: Erase the faulty DTC records and other data after repairing, used to turn off some annoying warnings light like check engine light(CEL) or reset ECU data after repair and replacement.LIVE DATA: View live data and parameters of multiple sensors in text, graph & analog, so you can monitor the working conditions of electronic components in real time to facilitate troubleshooting.Freeze Frame: A “snapshot” of critical parameter values at the time the DTC is set, for example, when an engine misfire is detected, a snapshot of the current sensor values is captured.
• BI-DIRECTONAL CONTROL(ACTIVE TEST): Perform real active test that can send commands to the vehicle’s ECU to drive the actuators to work, like ABS, window, door, solenoids, valves, wipers, headlamp, etc, helping you quickly find out bad parts and pinpoint faulty issues.
• ECU INFORMATION: Retrieves and displays the specific information for the tested control unit (ECU), as unit type,version numbers and other specifications, offering useful reference for repair work.

For Workshops, your paper diagnostic report featuring the report created date and time improves the diagnostic professionalism and reliability, thus you can win the trust of customers. For DIYers, you no longer worry about data loss. The printed diagnostic report can be permanently saved. You can take it out at any time to move the current diagnosis forward.

Bi-directional Control Scanner Quickly Locates Vehicle Problems within 5 Minutes

Why LAUNCH CRP919X Can Be Your Ideal Choice?

When you run the LAUNCH CRP919X bidirectional scanner, it helps you to pinpoint what and where the problem is. For example, you could use the CRP919X scanner automotriz to send a command “lifting the windows” to your vehicle, a) if the windows are raised properly, there are some mechanical problems (sensor, actuator, etc.) with your windows; b) if not, you can check the circuit, battery, or cable.

Some highlights of the LAUNCH CRP919X:

• Operating bi-directional control (active test) easily without vehicle control.
• Including various active tests: device acceleration, vehicle level position, windows, doors, sunroof, wipers, radiator fan, mirrors, sound horn, A/C compressor clutch relay, cooling fan, fu~el system, engine speed/throttle, etc.
• Diagnostic efficiency: you don’t need to spend a lot of time disassembling the entire door to find out why the window won't lift.
• Covering American, Asian, and European mainstream vehicles.
• Suiting for DIYers, home repair mechanics, technicians, repair garages, etc.

What is a Bi-directional scanner?

Bidirectional control is a generic term used to describe sending and receiving information between one device and another. The mechanics can use a bidirectional scan tool to request vehicle information or send commands to a module to perform specific tests and functions, which can help you quickly check out the vehicle problems.

Why Do We Need A Bi-directional Scan Tool?

• If you don’t want to drive your car to a shop and cost a sum of diagnostic fees, you can run a bidirectional scanner to check it yourself and finish some simple part replacing. If you have several cars in your home, this scan tool will save you a lot and recoup your expenses for this tool in a short time.
• The interesting thing about a bidirectional scanner (as opposed to a standard one) is that it can do more than read the OBD’s inputs. It can also send outputs to test a variety of modules in your car, including Brakes and ABS; Engine Functions; Transmission Functions; Door Lo~ck Systems; Battery Health; Oxygen, Air Pressure, and Temperature Sensors, etc.
• What would you do if the wipers stopped working? Just replace one or spend a lot money to fix it? Don't be in a hurry to dismantle your cars! Bidirectional control tool CRP919X can perform real active test that can send commands to the vehicle’s ECU to drive the actuators to work, like ABS, window, door, solenoids, valves, wipers, headlamp, etc, helping you quickly find out bad parts and pinpoint faulty issues.
• For example: using the diagnostic scanner to command the f-u-e-l pump. If the f-u-e-l pressure gauge shows proper f-u-e-l pressure, you’d know the f-u-e-l pump circuit and pump are functioning properly. The process just takes < 5 minutes. If test manually? At least 3X times as long!

31+ HOT Car Maintenance Functions and Updating

31+ Maintenance Functions with Wide Compatibility for 99% of Global Vehicles

As the ever-changing technological development and the increasing number of vehicle repair problems advance by leaps and bounds, the LAUNCH CRP919X scanner has added more reset functions up to 31+ and renewed vehicle coverage to reach deeper & all-around diagnostics to every detail. 15+16 function combination makes this CRP919X the top cost-effective scanner of 400 buck level.

• Oil Maintenance Reset: this enables you to reset the oil service for the engine oil life system.
• Steering Angle Reset: help erase the record of the old steering angle sensor and overwrite it with a new one to ensure the SAS system works properly.
• Basic TPMS Reset: reset tire pressure and turn off the TPMS light after replacement.
• BMS Reset: reset the monitoring unit of the car battery after replacing the battery or battery monitoring sensors.
• ABS Bleeding: remove the trapped air, and ensure your car remains safe to drive.
• Injector Coding: write the new injector code into the car system for the correct cylinder injection quantity.
• EBP: help replace and reset the brake pad.
• Throttle Adaptation: initialize the throttle actuators to the default state.
• TPMS Reset: reset the tire pressure.
• Immobilizer: Disable the lost k^eys and add new k^eys for old antitheft IMMO cars.
• Gear Learning: help finish tooth learning after changing the crankshaft in the car engine.
• Suspension Reset: adjust the vehicle body height sensor for level calibration.
• AFS Headlamp Reset: initialize the adaptive headlamp system.
• Gearbox Reset: help complete the gearbox self-learning to gear shifting quality.

Newly Updated Functions Solve More Module Reset/Relearn

Coolant Bleeding, Language Setting, NOX Reset, Seat Calibration, Transport Mode, Tyre Setting, Throttle Adaptation, Stop/Start, Power Balance, AC System Relearn/Initialization, Windows Calibration, High Voltage Battery Diagnostics, Intelligent Cruise Control System, G-a-s Particulate Filter Regeneration. (Keep updating later).

“Mall” Allows to Buy More Features

• The LAUNCH Code Reader Pro Scan Tool CRP919X thoughtfully adds the “Mall” module:
• Includes a vast array of enhanced features & expanded car software for users to buy.
• You can make an “in-app” purchase anytime to meet more diagnostic needs.
• No idea if the feature is compatible with your car models? check the compatibility list right on the diagnostic scanner.

100+ Brand Supported+ CAN FD & DOIP Protocols+ FCA AutoAuth, 99% Maximum Vehicle Coverage

Still bothered with these problems with your old scanner? Limited vehicle compatibility? Fail to support the GM models(2019 and later), had to extra purchase CANFD adapater? Fail to support some new released car models, due to incompatibility with DOIP protocol?

Powerful vehicles compatibility is one of the most important considerations when choosing an automotive diagnostic scanner. 2024 newly upgraded scanner LAUNCH CRP919x introduces CAN FD/DoIP new protocols into vehicle communication and diagnostics, supports FCA AutoAuth, and works well with 100+ brand, 20000+ worldwide models(1996-2024).

2024 New CAN FD/DoIP Protocols: Large Bandwidth, High Sampling Rate, Big Buffer Memory.

• CAN FD: Compatible with GM models (2019 and later). CAN with flexible data rate (CAN FD) overcomes the limitations of the classical CAN bus in terms of data transfer rate. In practice, the data throughput of CAN FD is 6x higher than classical CAN, depending on the network topology.
• DoIP: Compatible with BMW (F&G chassis), Volvo models (2018 later), Land Rover & Jaguar models (2017 later). With Diagnostics over DoIP, diagnostics introduced over UDS are used over TCP/IP and Ethernet. This enables much higher data rates than with CAN. That makes LAUNCH CRP919X save both in terms of time and expenses in the case of complex diagnostic tasks and flash applications.

2024 New Function AutoAuth Access: Bypass SGW in FCA Vehicles

With the newest update on LAUNCH scan tool CRP919X, you now have access to the security gateway module on 2018 and newer Fiat Chrysler vehicles, so that the diagnostic tool can clear codes, run bi-directional active tests, actuations, relearns or even IMMO key programming (pulls PIN & write), ADAS calibration assistance etc.

*Note: Update to get this new Function. Since November 23, 2022, all FCA-supported regions will require an account purchase to log in AutoAuth. The payment is charged by AutoAuth directly. LAUNCH is not involved in any transaction process. Reach us for more detail.

99.99% Global Vehicles Coverage: Work on 100+ brands and 20000+ models (1996-2024)

• [America]: Compatible with Lincoln, Dodge, GM, Chevrolet, Chrysler, Ford, GMSA, GMC, Jeep, Buick, Cadillac, etc.
• [Asia]: Compatible with Toyota, Honda, Hyundai, Subaru, Suzuki, Lexus, Nissan, Mazda, Mitsubishi, Infiniti, Acura, Isuzu, Kia, Daihatsu, Daewoo, etc.
• [Europe]: Compatible with BMW, Benz, Audi, Rolls-Royce, Volvo, VW, Land Rover, Vauxhall, Smart, Skoda, Seat, Saab, Abarth, Alfa Romeo, Bugatti, Citroen, Dacia, Mini, Opel, Peugeot, Porsche, Renault, Fiat, Jaguar, Lancia, Sprinter, Euro Ford, Mercedes, etc.

Continue to increase: It is worth mentioning that you will keep getting new models through the online update. This function is super helpful, especially for local dealers to win more businesses.

10 Languages Supported, No Language Barrier

LAUNCH CRP919X is designed to service global users with different language background and this is reason why it offer various language options. The default language of this device is English. It can now support up to 11 languages: English, Spanish, French, German, Russian, Italian, Portuguese, Japanese, Korean, Polish and Traditional Chinese.

IMMO Antitheft

Secure your car from getting stolen with this car scanner’s IMMO service to disable the lost car keys. You can also add new keys. But noted that this service is ONLY available for cars equipped with early IMMO systems: some 3.5th gen. VW, Audi, Skoda, Seat and Asian vehicles.

7” Screen & Android10.0

The fine-turned and mature Android10.0 O.S. makes operating the diagnostic scanner simple and frustration-free. The fast processor gives the answers you need without delay. And thanks to easy-to-use layout, everything can be well-done with a simple tap on the large 7” touch screen.

Battery Voltage Monitor

LAUNCH put this 2024-NEW feature in this diagnostic scanner, allowing you to monitor the car’s charging system. This scan tool can detect the battery’s voltage in real-time graphics so you can easily determine if the battery has enough juice to power car electronics.

Auto-generated Diagnostic Report

Once the scan is complete, a diagnostic inspection report will be generated automatically to list the detailed inspection result in a row, accurate and fast, letting you maintain vehicle health logs. You can save, print the report, and share it via email for expert advice.

Genuine LAUNCH Scanner

Please note that the LAUNCH Tech. USA, one of the dealers located in America, is not equal with the original manufacturer LAUNCH Tech. All of our on-sale diagnostic scanners are direct from the LAUNCH Tech., coming with official benefits of 5 years product backup and more.

AutoVIN Technology

This LAUNCH car scanner also has the smart software to automatically recognize your vehicle’s make, model, year, historical data … as soon as you connect it up to the car. This saves a lot of time and energy, without it you have to do loads of vehicle research.

10 Languages Menu

As an added perk, this LAUNCH diagnostic tool comes loaded with 10 languages: English, French, Spanish, German, Italian, Russian, Portuguese, Japanese, Korean, and Polish. It is easy to switch to your favorite language with simple one touch. No costs are involved.

Delicate Package

This diagnostic scanner is nicely packed in a protective package, which will survive the accidental drop, and making it an excellent present for your family or friends. The package has the nationwide 2-day delivery. You’ll have the scan tool just right on time when you need it most.