2024 NEWEST ALL-IN-ONE LAUNCH CAR DIAGNOSTIC SCAN TOOL FIT FOR FORD, GM,CHRYSLER

Why do Ford/GM/Chrysler Car Owners must have a LAUNCH Creader Elite 2.0 FGC OBD2 Scanner?

LAUNCH Creader Elite 2.0 FGC Scanners fit for Ford/GM/FCA Group breaking through the limitations of following technologies

Compare to LAUNCH X431 Elite Scanner or X431 Elite 2.0 Pro Scanner, LAUNCH Creader Elite 2.0 FGC Scan Tool can free fit for Ford/GM/Buick/Cadillac/Chevrolet/Chrysler/Dodge/Jeep..., it has updated hardware, which works with quad-core 1.3GHz CPU, Android 8.1 OS, larger 2+16GB, rechargeable 3000mAh Battery Capacity, powerful Bi-directional Control and Advanced Special functions, Dismountable USB Cable, etc.

1. Perform All Free Functions same as LAUNCH X431 series and OEM Tools, including Setup Sensing And Diagnostic Module (SDM) Part Number, D.P. F Regen, Cylinder Power Balance, Compression Test, Oil Reset, Battery Registration, Idle Relearn, etc. Get All Free Special Functions from "1.Diagnose" > "2.Manual Choose Model&Year" > "3.Automatically Search" >"4.System Selection" >"5.Manual Choose Module"> 6."Special Function".
2. Powerful Bidirectional Control(Active Tests): Request information or command a actuator to perform specific tests, such as cycling the a/c clutch on/off, EVAP test, Fuel Pump test and more to solve the specific repairing work.
3. Factory-Level Full Systems Diagnosis: One touch to Auto Scan all available systems to read/clear fault codes, view data stream, freeze-frame, retrieves module info, etc. Detailed diagnostic reports help you to quickly pinpoint problems.
4. Lifetime Free WiFi Updates: One-Click WiFi free update to get the newest software. Don't need any SD cards, cables or PC, high update frequency monthly, Save hundreds bucks subscription fee for every years.
5. Full OBD2 Functions for All Cars: Read/Clear Codes, turns off MILs, I/M readiness, On-Board Monitor(MODE 6), EVAP System(Mode 8), etc. Help you pass emissions tests without going to repair shop.
6. More Cost Effective Features: AUTO VIN to quick identify vehicle VIN and do a comprehensive diagnostic(Suits for Vehicles after 2006). 4-IN-1 Live Data to show the live vehicle conditions in text and graph to help you to analyze the abnormal parameter easily. Email Share & Print Diagnostic Report; Online Feed-back; Data Record, Replay & Screenshot; Real-time Battery Voltage to judge the state of battery. Built-in DTC Library & Code Reach from Google.
7. Mall Service: Allows you to purchase other more car brand software in the Mall. (*Note: Refunds are not supported for software purchased at Mall. Check compatibility first via message.)

ALL-IN-ONE LAUNCH Creader Elite 2.0 FGC Scanner, Best Se-ller of LAUNCH Wireless Scan Tool For DIYer

1 LAUNCH Creader Elite 2.0 FGC Scanner = Multiple Brands OEM Scan Tools, Pinpoint Out Problem Location, Improving 200% Efficiency!

When a thorough diagnosis is your aim – spanning battery, steering, suspension, audio, or headlamp systems, etc. – LAUNCH Creader Elite 2.0 FGC Car brands professional scanner emerges as the ultimate choice, which can work with  Ford / GM / Chrysler /Buick/ Cadillac/ Chevrolet/ Dodge/JEEP from 1996 to 2024 to read/ clear codes, read ECU info., view Live Data, do active tests, perform special functions and etc. For all available systems, providing you with a Dealership-Level diagnosis, getting the accurate and in-depth diagnosis across all automotive systems. Smoother, Faster, More Accurate, Pinpoint System Faults in seconds.

• Retrieve ECU Information: Access control unit details like unit type, version numbers, and more, offering crucial references for repair work.
• Read/ Clear DTCs: Read fault codes to locate problems and clear the codes after certain repairs.
• Freeze Frame Analysis: Capture a snapshot of current sensor values during issues like engine misfires, aiding in diagnostics.
• Active Tests/Bi-directional Control: Perform Active Tests/Bi-directional Control to accurately figure out the work status of modules.
• Special Function: Conduct diverse daily automotive maintenance functions on specific systems, enhancing overall vehicle health.

LAUNCH has established itself as a most reputable brand in the automotive industry, offering reliable and feature-rich scan tools with #1 extensive field-tested database, diagnosing 5 million cars per month, and outputting 10 million diagnostic reports. With LAUNCH scanner, you’ll have access to really full systems diagnosis, more diagnostic features and can diagnose newest vehicles models. Unlike some low-end tools for small teams that only support 50-60% of the functionality.

>>> Auto VIN

• LAUNCH Creader Elite 2.0 FGC bidirectional scan tool adopts the latest VIN-based Auto VIN Technology that enables auto technicians or home mechanics to identify vehicle information at a single touch, like Brand, Year, Make, Model, etc. With the Auto VIN feature , Elite 2.0 Pro FGC can perform comprehensive diagnostics accurately and efficiently. Note: Auto VIN function can NOT work on all cars. You can always navigate your vehicle through the menu manually to perform diagnostics and services.

>>> 4-in-1 Live Data Stream

• LAUNCH Creader Elite 2.0 FGC Scanner can combine 8 graph in a page which will allows you to see what happened at what time and in relation to what else you're interested in, such as fuel pressure, battery voltage, cylinder misfire data, long/short fuel trim, engine rpm, etc. And You’ll easily focus on any symtem-specific or suspicious data parameters, the automotive diagnostic scanner allows maximum of 4 live data streams to be merged in one graph.

>>>Live Data Stream Record & Playback

• LAUNCH Creader Elite 2.0 FGC diagnostic tool allows you to record the live data stream, and lets you view and analyze the data you have recorded at any time. You can choose to combine, report, or record the data to make it easier to analyze and troubleshoot complex issues.

>>> Health Report&Feedback

• LAUNCH Creader Elite 2.0 FGC can automatically generate health reports via One-Click, the scanner will carry out in-depth inspections and calibrations for your vehicles, and you can share or print health report via email in scanner.

LAUNCH Creader Elite 2.0 FGC with ALL Free Services

Powerful Bidirectional Control (3000+ Active Tests) – Diagnose the Real Cause of the Troubles within 5 Minutes

Precisely Locate The Issue, Reduce Unnecessary Maintenance Costs

LAUNCH Creader Elite 2.0 FGC Automotive Diagnostic Scan Tool is a necessary scanner for AU car owners. It inherits the powerful bi-directional control of the LAUNCH X431 Series, making it a more cost-effective scanner compared to others in its class (costing 300 bucks less than other bidirectional scan tools). The implementation of bi-directional control, also known as Active Test, Actuator Tests, Functional Tests, Inspection Tests, System Tests, or similar, enhances problem location and diagnostic accuracy by 5 times, significantly saving mechanic/workshop time and accelerating the pace of auto workshop business.

LAUNCH Creader Elite 2.0 FGC with Bi-Directional Control can allow two-way communication and control between scanner and car systems. It enables drive solenoids and actuators for active testing, sending commands to the system/component to test its operating status without using the vehicle controls. By utilizing Bi-Directional Control, car dealer, auto repair shop, and so on can actively monitor and control the behavior of a system, let you quickly understand whether a specific system, component, or subsystem is operating normally. It provides a more comprehensive and interactive approach to testing and troubleshooting, allowing for efficient identification and resolution of issues, pinpoint issues and greatly improve diagnostic efficiency, saving time on troubleshooting and reducing your unnecessary maintenance costs.

• If a fuel pump is not working and leads to ignition failure, it could be a faulty pump, wiring, relay, or command. By turning the fuel pump on and off via this LAUNCH Creader Elite 2.0 FGC bidirectional scanner, you can quickly determine whether it’s a wiring, relay, or pump issue without removing any parts. Than you may do not need to spend lot of moneys to repair because of a little of problems. The process just takes < 5 minutes. If test manually? At least 3X times as long!
• Frequently-used Active Tests including:

Evap Tests/ Purge Solenoid/ Fuel Injector Test/ Cycling A/C Clutch Relay/ Cycling Abs Motor Pump/ Cooling Fan Test/ Headlamp Test/ Sunroof/ Operate Mirrors/ Turn On The Sound Horn/ Turn On The Radiator Fan/ Open/Close Windows/ Turn On/Off The Lights/ Test Door Lock Actuators/ A/C Compressor Activation/ Modulate The Throttle/ Compression Test/ Turn On/Off Front And Rear Side Acm Solenoid/ Turn The Fuel Pump On And Off/ Cycling The A/C/ Clutch On And Off/ Left Clutch Electromagnetic Coil Test/ Acceleration Device Test/ Oil Pressure Control Test/ Dynamic Camera Aiming/ Vehicle Level Position Calibration/ Brake Vacuum Pump/ Inlet And Outlet Valve Tests/ Open Brakes Tests/ Parking Brake Botors/ Wheel Speed Sensor Supply/...

* Note: Active test vary by car model and year, not available for all cars. Check compatibility first via kingbolen-sales02 @ hotmail.com.

Full OBD2 Modes fit for All vehicles after 1996, Saving Bucks and Time

Have you encounter the following issues before?:

· I bought similar diagnostic scanner before, and found it reads codes very slow ,and ended up throwing it in the garbage, and turn to a reliable brand...

· Tired of paying 500-1000 usd per visit to the mechanic ? smh... (magically every problem, no matter how big or small, cost about the same to fix)

· I fixed the issue of my car but check engine warning light stays on?

· I had an OBD2 code reader around 50-100 USD, and found it cannot even read misfire counts?

If yes, LAUNCH X431 Elite 2.0 Pro FGC Scan Tool is the Best Choice for you, no matter you are DIYer or Car enthusiast, this is a true car scanner you always dream of .

LAUNCH X431 Elite 2.0 Pro FGC OBD2 scanner for engine system with full functions of obd2.

• Data Stream View: Live data are displayed in a time-based chart to help customers to better analyze the abnormal parameter. This function will let you see engine performance information, if there are any trouble codes or issues with your engine or ECU.
• Freeze Frame Data Viewing: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs. It intended to provide you with a guide as to where a fault might be occurring within a vehicle.
• O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.Accurately identifies failures of oxygen sensor and vehicle emissions related errors.
• I/M Readiness Check: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing, which is convenient to determine the vehicle’s condition.This function can help you pass SMOG TEST.
• On-board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems. Which is a way to find out if the engine has any misfire or compression problems on a particular cylinder, or other data that might indicate a problem but isn’t severe enough to trigger a check engine light.
• EVAP System Test: Lets you initiate a leak test for the vehicle's EVAP system, that prevents fuel from evaporating out of your tank and contributing to smog. After fixed a problem with the fuel system,you can verify your fix right away, without waiting a few days (or longer) for your car to run it automatically.
• DTC Loookup: with built-in DTC library, clicking on the error code directly for definition, displaying the error code and its meaning, saving time for you to looking for the meaning of DTC on the internet.

2024 LAUNCH Creader Elite 2.0 FGC FOR FORD/GM/CHRYSLER - WIDE VEHIVLE COVERAGE WITH NO IP LIMITED!

>>> Free Supporte 3 Vehicle Brands

• Compatible with 99% vehicles of Ford, GM, Chrysler from 1996-2024, including 12V cars, light duty trucks, SUVs, hybrid vehicles, minivans, no IP limited.

>>> Autoauth for FCA SGW

• Use the latest software update function AutoAuth to provide systems diagnosis, active test, retrieve module info, ecu coding, etc., making the diagnostics more secure. Applicable to FCA vehicles(Chrysler, Dodge, Jeep, Fiat) equipped with a security gateway module (SGW) in 2017 and later. (Note: There is an annual 50 bucks fee for AutoAuth account, but the payment is charged by AutoAuth directly. LAUNCH is not involved in any transaction process.)

> Fit for FCA Vehicles from 2017-2024 including 300/Pacifica/Challenger/Charger/Durango/Journey/Ram 1000/Ram 1500(DS)/Ram 1500(DT)/Ram 2500/Ram 3500 Cab Chassis/Ram 3500 Cab Chassis 10K/Ram 3500 Pickup/Ram 4500/Ram 5500/ProMaster City/Cherokee/Compass/Compass (Brazil, China, India, Mexico)/Grand Commander/Renegade/Wrangler (JL)/Giulia/Giulietta/Stelvio/500X/500X/500BEV/Toro/Doblo/Ducato/Novo Strada/Mobi/... More keeps growing

>>> Programmable Module Installation

• PMI Function For Ford/Lincoln/Mazda, etc. When you replace or initialize a new/used module for Ford/Lincoln/Mazda, LAUNCH X431 Elite 2.0 Pro FGC scanner allows you to copy the data from the original module and install it to the new unit to finish the module replacement.

>>> 11 Languages Optional

• English, French, Spanish, German, Russian, Italian, Portuguese, Japanese, Korean, Chinese Traditional, Polski. Let you feel more comfortable with your native language, just switch back and forth as necessary without encountering any sort of language barrier.