Power On/Off switch for Philips/Acorn monitors AKF11 12 40 ADF32 8833 etc Lugs

This product data sheet is originally written in English.



NEW On/Off switch for many monitors mainly 15KHz TV type from Philips & Acorn

Description:

The switch is available in two versions Pins or Lugs. The Pins version is for soldering to a PCB with the pins going through the PCB as normal. The lugged version is for wire connection but can modified as shown in the last photo if PCB mounting is required. If you are not sure if you require Pins or Lugs then as the lugged version is easier to use modified for pins rather than the pin version used for wire connection we suggest going for the this lugged version. We currently have both versions.

The switch may need adapting for some monitors. When we fit them we often have to snap off the two/three unused connectors with red at their base and for through PCB soldering on some monitors the connectors need clipping to be pins (See photo) physically getting to the switch is often the most difficult part!

NB. The switch may be supplied with either a plastic or a metal mounting bracket, as shown in the photos, depending on what is available at the time. The mounting bracket may need replacing with the bracket used on the original switch. It normally slides off easily.

Most if not all Philips 8833 MK 1 use the lugged version.
Most if not all Philips 8833 MK 2 use the pin version.

Not sure which version the monitors in the following list require.
This is a listing for a NEW On/Off switch for many Monitors: Philips, Acorn, CVC40 ITT / 21K77 / TELEFUNKEN MP150 / MP212 / 3604 / 3035.

Believed to fit the following 1980s 14" monitors Acorn AKF11, AKF12, ADF32, AKF30, AKF40 and Philips 8833 mk 1. Also other monitors made by Philips but badged by others including Commodore Amiga 1084S and some ITT monitors. Also fits the Acorn AKF85

It would be very useful if buyers can let us know if their monitor originally had the pin or lug version, Please also give us the make and model number of the monitor.

This is not normally an easy fit as it is difficult to get to the underside of the motherboard.
If you do fit one we suggest that at the same time you resolder all the connections to the input sockets and the line output transformer (LOPTi) as these are well known to go 'dry'. Self-fit not advised due to high voltages present inside monitors.

Part ref: MS37
Philips part no.:4822 276 11504
Compatible to ITT ME5A 13/1179

*Only two per customer due to a very limited supply.

We can ship Worldwide.
Sorry about the postage cost, even just one has to go as 'Small Parcel' which costs us more than we are charging!

We can ship Worldwide.
If delivery to your country is not shown please contact us for the price.



See our other listings for more retro computers, parts and accessories!
International orders

International orders (including to the European Union) may also be subject to import duties, and other local taxes and charges, which the buyer will be responsible for. We will always ensure items have a correctly filled Customs document.

We follow ebay guidelines and only send to a verified PayPal address unless by prior arrangement.
UK delivery: Light Items are normally sent by Royal Mail untracked post, heavier items are sent by 3-5day courier.
Non UK delivery is normally sent by untracked Airmail (3-5 days Europe, 5-7 days for most of the rest of the world).
Next day delivery in the UK and express delivery to the rest of the world can be arranged.

Payment

Cheques payable to "Fourth Dimension" please.
Bank transfers to Sort Code: 20-20-62 Account no.: 70677213 Acc. Name: Fourth Dimension
International bank account no.: IBAN GB26BARC 202062 7067721
SWIFT BIC: BARCGB22 n.b. If your Bank requires an 11 character SWIFT BIC, use BARCGB22XXX instead.

About Us

four-d-pi-shop is the ebay arm of CJE Micro?s & 4D, who have the world's widest range of Raspberry Pi/RISC OS & Acorn accessories including many from third parties, most of which are famously normally 'In Stock'. Established in 1981, we have always specialised in hobbiest computing and have gained a reputation for a broad knowledge with high quality pre- and post-sales service.
CJE & 4D have, over the years, developed many of our own products for Acorn/RISC OS & Raspberry Pi computers. From the first ever 3rd party accessory for BBC Micro Model B (cassette leads) to the first ever 3rd party hardware for the Raspberry Pi Model B (Real Time Clock Module).
We are continuing to develop new products and expect to make a number of significant launches during the next year. Fourth Dimension (4D) is a sister business to CJE Micro's, having been a sibling since 1998.

Contact Us

The Shop

Our showroom and sales area is normally open from: Monday to Friday 9am - 5.30pm
To find our shop you can view our address in the "Business Seller Information" below.


The switch is available in two versions Pins or Lugs. The Pins version is for soldering to a PCB with the pins going through the PCB as normal. The lugged version is for wire connection but can modified as shown in the last photo if PCB mounting is required. If you are not sure if you require Pins or Lugs then as the lugged version is easier to use modified for pins rather than the pin version used for wire connection we suggest going for the this lugged version. We currently have both versions. four-d-pi-shop is the ebay arm of CJE Micro?s & 4D, who have the world's widest range of Raspberry Pi/RISC OS & Acorn accessories including many from third parties, most of which are famously normally 'In Stock'. Established in 1981, we have always specialised in hobbiest computing and have gained
Brand Unbranded
Type Switch
EAN N/A