ESP8266 ESP-01 ESP-01S ESP-01M ESP-01F ESP-07 ESP-07S ESP-12S ESP-12E ESP-12F ESP Serial Port WIFI Wireless Transceiver Module USB to ESP8266 Adapter Board

 
ESP-01
 
Advantages:
low price, only to earn a small profit base, hope that this will bring more rapid development of the Internet of Things
smallest, the size of a fingernail. Easily embedded into any product 
Powerful internal ran LWIP agreement 
supports three modes: AP, STA, AP + STA coexistence mode 
perfect simple and efficient AT commands, allowing you to develop more simplely
 
ESP-01S
 
Parameters:
Wireless standard: 802.11 b / g / n
Frequency range: 2.4GHz~2.5GHz(2400M ~ 2483.5M)
Data interface: UART / HSPI / I2C / I2S / IR Remote Contorl / GPIO / PWM
Operating voltage: 3.0 ~ 3.6v (Suggest 3.3v)
Working current: average 80mA
Operating temperature: - 40 degrees to 125 degrees
Storage temperature: room temperature
Package size: 14.3mm * 24.8mm * 3mm
External interface: N / A
Wireless network mode: station / softAP / SoftAP + station
Security mechanisms: WPA / WPA2
Encryption type: WEP / TKIP / AES
Upgrade firmware: local serial port burn, cloud upgrade, host download burn
Software development: support customer custom server, provide SDK to customer secondary development
Network protocols: IPV4, TCP / UDP / HTTP / FTP
User Configuration: AT + instruction set, cloud server, Android / IOS APP
 
ESP-01M
 
Description:

Tiny WiFi module uses ESP8285 chip, which has complete and self-contained WiFi network functionality. So it can be regarded as a standalone application, also be run as slave from other host MCU. This chip integrated enhanced 32-bit core processors of Tensilica's L106, and it has on-chip SRAM. The advantage of ESP8285 is both hardware and software are mature enough, and it has 1M Byte Flash inside. The main frequency can above 160 MHz, and the series rate can be as high as 4Mbps. It has GPIO, IIC, UART, PWM, ADC and some more interfaces. Completely compatible with ESP8266, so we can use original code.
This module can be used on smart home, such as domestic appliance, intelligent socket/lamp, baby monitors. In addition, it also can be applied on electronic industrial, such as sensor network, industrial wireless control product parameter module structure diagram and so on.

Features:

Frequency up to 160MHz
Built-in 10 bit high precision ADC
Support UART / GPIO / IIC / PWM / ADC and other interfaces
Integrated Wi-Fi MAC / BB / RF / PA / LNA
Supports multiple hibernation modes with standby power as low as 1.0 mW
Embedded Lwip protocol stack
Support STA / AP / STA + AP working mode
Support Smart Config / AirKiss a key distribution network
Serial port speed up to 4Mbps
Universal AT command can get started quickly, you can brush Web configuration firmware
Support serial local upgrade and remote firmware upgrade (FOTA)

 

Details:
Size: 18*18*2.8 (±0.2)mm
SPI Flash: 1MB
The type of interface: UART/GPIO/ADC/PWM
The quantity of IO put: 11
Series rate: 300-4608000 bps, the default is 115200bps
RF range: 2412-2484MHz
The type of antenna: onboard PCB wire
Transmission power: 802.11b: 16±2 dB (@11Mbps) 802.11g: 14±2 dB (@54Mbps) 802.11n: 13±2 dB (@HT20, MCS7)
Receiving sensitivity: CCK, 1Mbps: -90dB CCK, 11Mbps: -85dB 6 Mbps (1/2 BPSK): -88dBm 54 Mbps (3/4 64-QAM): -70dBm HT20, MCS7 (65 Mbps, 72.2 Mbps): -67dBm
Power consumption: Continuous transmission→average value:71 mA, maximum value: 300 mA. Modem sleep: 20mA Light sleep: 2mA Deep sleep: 0.02mA
Security: WEP/WPA-PSK/WPA2-PSK
Supply voltage: 3.0V-3.6V
Supply current: >300mA
Working temperature: -20℃-85℃
Storage environment: -40℃-90℃,<90%RH

 

ESP-01F 

 
Product Specifications
Product Features

  • ESP-01M 

  • Features

  • Frequency up to 160MHz

  • Built-in 10 bit high precision ADC

  • Support UART / GPIO / IIC / PWM / ADC and other interfaces

  • Integrated Wi-Fi MAC / BB / RF / PA / LNA

  • Supports multiple hibernation modes with standby power as low as 1.0 mW

  • Embedded Lwip protocol stack

  • Support STA / AP / STA + AP working mode

  • Support Smart Config / AirKiss a key distribution network

  • Serial port speed up to 4Mbps

  • Universal AT command can get started quickly, you can brush Web configuration firmware

  • Support serial local upgrade and remote firmware upgrade (FOTA)

 
 
ESP-07
 
Features:
The smallest 802.11b/g/n Wi-Fi SOC module
Low power 32-bit CPU, can also serve as the application processor
Up to 160MHz clock speed
Built-in 10 bit high precision ADC
Supports UART/GPIO/IIC/PWM/ADC
SMD-16 package for easy welding
Integrated Wi-Fi MAC/BB/RF/PA/LNA
Deep sleep current as low as 20uA
Embedded lwIP protocol stack
Supports STA/AP/STA + AP operation mode
Support Smart Config/AirKiss technology
UART baudrate up to 4Mbps
General AT commands can be used quickly
Supports remote firmware upgrade (FOTA)
 
ESP-07S
 
Features
The smallest 802.11b/g/n Wi-Fi SOC module
Low power 32-bit CPU, can also serve as the application processor
Up to 160MHz clock speed
Built-in 10 bit high precision ADC
Supports UART/GPIO/IIC/PWM/ADC
SMD-16 package for easy welding
Integrated Wi-Fi MAC/BB/RF/PA/LNA
Support multiple sleep patterns. Deep sleep current as low as 20uA
UART baud rate up to 4Mbps
Embedded LWIP protocol stack
Supports STA/AP/STA + AP operation mode
Support Smart Config/AirKiss technology
Supports remote firmware upgrade (FOTA)
General AT commands can be used quickly
Support for the two development, integration of windows, Linux development environment
 
ESP-12S
 
        The ESP-12S WiFi module supports the standard IEEE802.11 b/g/n protocol, a complete TCP/IP protocol stack. Users can use this module to add networking capabilities to existing devices or to build separate network controllers. 
         The ESP8266 is a high-performance wireless SOC that offers maximum utility at the lowest cost and unlimited possibilities for embedding WiFi functionality into other systems. 
 
ESP-12F
 
        The core processor ESP8266 integrates the industry-leading Tensilica L106 ultra-low-power 32-bit micro MCU in a small package with 16-bit Lite mode, clocked at Supports 80 MHz and 160 MHz, supports RTOS, and integrates Wi-Fi MAC/BB/RF/PA/LNA.
         The ESP-12F WiFi module supports the standard IEEE802.11 b/g/n protocol, a complete TCP/IP protocol stack. Users can use this module to add networking capabilities to existing devices or to build separate network controllers.
         The ESP8266 is a high-performance wireless SOC that offers maximum utility at the lowest cost and unlimited possibilities for embedding WiFi functionality into other systems
 
ESP-12E
 
ESP8266-12E is an enhanced version ESP8266-12, improve peripheral circuitry increases impedance matching, the signal output is better, whether it is stable or anti-jamming capability, have been greatly improved! For users before selecting the ESP-12, it does not matter even if the product has been made, enhanced version is fully compatible with previous firmware, the pin has added the ESP-12 on the basis of six IO ports, SPI mouth leads, develop more convenient, application more extensive!
 
Adapter Board
 
Parameter:
 Model number : ESP8266 
 ISM : 2.4GHZ   
 PA  : +25 dbm  802.11 b/g/n 
 This module requires a 3.3 volt supply for VCC, and 3.3V logic. 
 It is not 5V tolant. Connect RX or TX on 5V for Arduino will destroy this module. 
 You must use a logic level converter, or a 3.3V for Arduino 
 The 3.3V supply on the for Arduino Uno has inadequate current capabilit to power this module. 
 You must provide a separate, higher 3.3V supply(about 300mA or better)
 
 
USB to ESP8266 module 
 
Overview
USB to ESP8266 module can ESP8266 wireless module through the serial port to connect the PC, easy to debug ESP8266 WIFI module.
 
Features
Using CH340 chip, stable performance, good compatibility, Windows system, all the basic support;
Switch board with 1000uF solid capacitors to ensure that the current supply, not because of power problems so that WIFI module crash without response;
 
Board Function Description:
ESP8266 wireless WIFI module and USB interface in the same direction for docking, (Note: ESP8266 WIFI module to be purchased separately), the module can be inserted into the computer can use the serial debugging assistant software test ESP8266 module.