Features:

1.Greatly increase the wireless network coverage and stability

2.Support 2.4G B/B+/G/N super G wireless network and Bluetooth device

Frequency range of 2400-2500MHz internationally recognized industrial frequency band

3.Maximum output power is 3W(35dbm,3000MW)

Bi-directional,half-duplex and automatic switching(Plug and Play),automatic gain control

4.SMA connector,easy to replace various antennas

Indoor and outdoor directional and omni-directional antennas can be connected

5.Can be used with Bluetooth-compatible devices,wireless network cards,wireless routers,wireless APs

6.Input level is not limited,even if the input power is high,it will not burn out

7.All aluminum alloy build,convenient heat dissipation

8.Simple and convenient installation,no software,plug and play

Specification:

Frequency Range:2400-2485MHz 

Channel Width:20Mhz&40Mhz

Support Standard:IEEE 802.11b/g/n

Operation Mode:Bidirectional,Half Duplex,Time Division Duplex

Connector Type:SMA 

Output Power:3000mW(35dBm) 

Input Power:0~20dBm 

Transmit Gain:15-18dB 

Receive gain:≤12dB

Noise figure:≤3.5dB    

Operating Voltage:12V/2A DC 

Material:Aluminum Alloy 

How to use

1.Remove the antenna on the wireless AP or wireless router first

2.Take out the SMA cable(RG316)and connect the wireless AP(wireless router)with the signal amplifier(TO Radio)

3.Connect the antenna on the other end of the signal amplifier(TO Antenna)

4.Plug in the power supply and you are done

Package includes:

1*2.4G wireless signal amplifier

Note:

1.The power amplifier is not suitable to be used on devices with higher power

2.If this power amplifier is connected to multiple antenna ports of 11N

Not all antenna ports are transmitting signals due to the MIMO technology adopted by 11N

So when connecting multiple power amplifiers to the routing of 11N,not all of the working status lights are blue

3.The amplifier should be connected to the input device and output antenna before turning on the power

Only include the above package products

The product contains LOGO Hope you don't mind

Please allow 0-1cm error due to manual measurement

Please make sure you don't mind before bidding

Due to the difference between different monitors

Pictures may not reflect the actual color of the item.Thanks