This is a brand new Gold Side Shield (S029) and it can be supplied with either free engraving or blank.
The shield measures 34mm (h) x 37mm (w) and has two fixing holes for mounting.
It is not supplied with fixing pins, but if required these can be purchased separately from our ebay shop:
The shield measures 34mm (h) x 37mm (w) and has two fixing holes for mounting.
It is not supplied with fixing pins, but if required these can be purchased separately from our ebay shop:
If you require a large quantity or more shields than are available, then please contact us.
This
shield can be engraved on one side only and we recommend a maximum of 4
lines and 11 characters per line (including spaces).
We can add more characters if requested, but please be aware that adding too many characters will result in a smaller font size, and may affect overall legibility and appearance.
Our recommended font for this item is "Franklin". However if you prefer a different font style, then please choose one from those listed in the section below and let us know your preference when submitting your engraving instructions.
If you require all of the engraving to be in capital letters, then we do not recommend the following fonts: Baby Scipt, Balmoral or Vanessa
Please note that all engraving on this product, is done with state of the art computerized machinery, using diamond tipped cutters. So you are guaranteed workmanship of the highest possible quality.
We can add more characters if requested, but please be aware that adding too many characters will result in a smaller font size, and may affect overall legibility and appearance.
Our recommended font for this item is "Franklin". However if you prefer a different font style, then please choose one from those listed in the section below and let us know your preference when submitting your engraving instructions.
If you require all of the engraving to be in capital letters, then we do not recommend the following fonts: Baby Scipt, Balmoral or Vanessa
Please note that all engraving on this product, is done with state of the art computerized machinery, using diamond tipped cutters. So you are guaranteed workmanship of the highest possible quality.
ENGRAVING INSTRUCTIONS (How to Send)
You can send us your instructions in one of the following ways:
- From the ebay checkout (confirm order page) select "Add Message" then enter the text that you require engraving.
Remember to select the blue "Add Message" Button before confirming and paying for the order. Otherwise your message will not be saved and we will not receive your instructions. - From eBay - use the "Contact Seller" option
For example, if you entered:
My Message = M.Jones \ 2024
My Chosen Font Style = Roman
We will then engrave it as below, (centralized) on the shield:
M.Jones
2024
2024
Please note:
- We
cut and paste all instructions onto the engraving machine, so please
check all words & spelling thoroughly, before submitting your
engraving requirements. As we cannot accept returns on items that have
been incorrectly engraved, if the fault is not with us.
- If you do not require your item to be engraved / personalised, then please advise us at the time of placing our order, as this will avoid any unnecessary delay.
FONT OPTIONS
The
font styles below are available on this product. If you do not choose
one when sending your engraving instructions, we will choose a suitable
one for you.
