Product Description

1PC Air Compressor For Ford F-150 F-250 F-350 F-450 1997-2004 5.4L CO 101290C




Thanks for choosing us! Provide VIN and product detail Detail drawings to ensure that you buy a satisfactory and suitable product.


Specifications:

Material: Aluminum Alloy

Color: Silver Black

Placement on Vehicle: Front

Quantity: 1

Pulley Groove Quantity：6

Voltage: 12V
Compressor Type: Belt Driven

Fitment Type: Direct Replacement

Package Size: 26.5x19x23.5cm

Package Weight: 7.1kg

Part Number: 874AZ00959

Interchange Part Numbers: CO 101290C, CO101290C

Fitment:For Ford F-150 F-250 F-350 F-450 1997-2004 4.2L/4.6L/5.4L

Package Include:1pc Air Conditioning Compressor


Features:

1. Built to strict quality control standards 100% factory tested

2. Easy Installation，100% Compatible with OEM Parts, meets Original Equipment Manufacturer (OEM) Standards

3. Mechanically tested prior to leaving the factory ensures optimal performance and enhanced durability.

4. Perfect match for the original car.

5. Protection against vibration and light side forces.

6. Great life cycles.

7. Guaranteed Exact Fit for easy installation.


Attention:


1. Please confirm compatibility before purchasing to ensure correct fitment.

2. Please ensure the installation site is clean otherwise it will lead to the high temperature of the compressor and the melt of the clutch.

3. Noise, vibration, durability, vacuum decay, and pressure decay need to be tested to ensure no leaks and keep longer life of the compressor.

4. It is strongly recommended to conduct professional maintenance and installation.


Note:

The compressor you are ready to replace has failed for some reason, and it is important that you find out the cause of the compressor failure before installing our compressor, a step that allow you to avoid the pain of multiple replacement. 80% of the compressor fail because of a lack of lubricating oil or because of the blockage of the system. Remember, 60% of the oil in the refrigeration system should be in the compressor. So, if the total amount of oil in the system is 200 ML (6.76oz) then the compressor should have 130ML (4.39oz) of oil. Because the refrigerants are circulating in the system with oil, and finally they flow back to the compressor. If the reason for the failure of the original compressor is that there is not oil or there is not enough oil, then the system has a leakage of refrigerant or a place to block, preventing the lubricating oil from flowing back to the compressor. The residue and blockage in the system prevent the normal oil from flowing back to the compressor during the day. If you don’t fix the leak and blockage, this compressor will also fail.

Confirm the correct amount of refrigerants on board according to the requirements of OEM. If the refrigerating capacity of the car is insufficient, the amount of refrigerants should be increased. Refer specifically to OEM instructions.

After the old compressor is taken down, drain out the oil in it. In this way, turn the compressor upside down and shake the position above the middle of the compressor to pour out the oil. Pour the used oil into a clean cup to see if there is any residue and stains in it. Both variable and compressors have an oil plug that should be removed before pouring oil.

If the oil poured out of the old compressor is a thousand clean and has 60% or more of the OEM requirements, flush out remaining oil in the system. At this time, it is necessary to determine why the original compressor failed. 

*Did the clutch burn out? 

*Is the voltage output from the system to the clutch correctly?

*Is the shaft seal of the compressor or gasket of the cylinder block leaking?

If it is one of the above problems, then it is the compressor problem. If the condenser fan fails, it will cause the air flow to reach the condenser to weaken, so that the refrigeration system does not get the required heat.

If there is not oil or not enough oil in the compressor, there may be a freon leak in the system, find the leaked part, fix it or replace it, and do not use sealant in the system.

Before installing the compressor make sure that the system has the recommended amount of oil too. If the compressor has the amount of oil required but the system doesn’t have enough this will lead to compressor failure any way

It takes at least 45 min to clean the system, a process that removes residual solvents and moisture.




 Our products are durable and can withstand harsh working conditions, not only meet basic needs, but also improve working performance. In line with the promise of "bringing new life to your machines", based on our years of supply chain management and strict quality control, it has been unanimously recognized by customers all over the world.

We accept eBay managed payments for all orders.

Full name, correct phone number, and detailed physical address (home or office address) are required, but not a PO/P.O/PPO/FPO address.

Your order will be shipped via DHL,FEDEX, UPS, TNT or EMS within 24-48 hours after payment received and will arrive in 3-7 days (SpeedPak about 7-20 day).

If you receive a defective product, or if you receive the wrong product, we will accept the return request within 30 days of receiving the item. Send us your pictures or videos and we will solve your problem as soon as possible.

Note: We only accept returns in their original packaging. Please make sure that the item is free of human vandalism.

If you have any questions about your order or product, please leave us a message and give us a chance to help you before leaving any feedback.
About Us

 Our products are durable and can withstand harsh working conditions, not only meet basic needs, but also improve working performance. In line with the promise of "bringing new life to your machines", based on our years of supply chain management and strict quality control, it has been unanimously recognized by customers all over the world.

Payment

We accept eBay managed payments for all orders.

Shipping

Full name, correct phone number, and detailed physical address (home or office address) are required, but not a PO/P.O/PPO/FPO address.

Your order will be shipped via DHL,FEDEX, UPS, TNT or EMS within 24-48 hours after payment received and will arrive in 3-7 days (SpeedPak about 7-20 day).

                    
Returns
If you receive a defective product, or if you receive the wrong product, we will accept the return request within 30 days of receiving the item. Send us your pictures or videos and we will solve your problem as soon as possible.

Note: We only accept returns in their original packaging. Please make sure that the item is free of human vandalism.

                    
Contact Us
If you have any questions about your order or product, please leave us a message and give us a chance to help you before leaving any feedback.                    
powered by tongtool

On May 15, 2024 at 21:16:03 PDT, seller added the following information:

DataCaciques