Saddlebags zip off and on so that you can take them with you.
This set is excellent for those last minute trips. Easy on and off means you can turn your sleek boulevard cruiser into a touring bike in a matter of minutes.
What is Ballistic Nylon 1680 Denier?
Today the term is often used to refer to any nylon fabric that is made with a "ballistic weave", typically a 2x2 or 2x3 basket weave. It can be woven from nylon yarns of various denier such as 840 denier and 1680 denier. Denier refers to the weight, not the strength, of the fabric. Laboratory tests[citation needed] have been run and the double weave 1050 denier fabric is the strongest and most durable fabric for its denier weight level. The 1680 denier is a good alternative that has a similar strength but lighter weight than the 1050[2] as it resists abrasion and tearing. Ballistic nylon is hard to dye, so it is often found in black or similar dark colors.
SaddleBags (pair)
Sissy Bar Bag
Tool Bag |
Barrel Bag
Backpack Bag
Windshield Bag. |
Pair of Saddlebags : 14" x 10" x 5-1/4"
Windshield Bag : 9-1/4" x 6" x 2-1/2"
Tool Bag : 10" x 5" x 2"
Sissy Bar Bag : 7-1/2" x 8-1/2" x 3"
Barrel Bag : 14-3/4" x 9-3/4" x 9-3/4"
Backpack bag : 11" x 14" x 4-3/4"
Weight : 13.4 lbs
Shipping is the same anywhere within the continental US. We do not ship to PR, HI, AK, APO/ FPO or P.O. boxes.
All sales are final. All items are sold on an as-is basis unless otherwise stated in the listing. We are reasonable people so if something should come up, just tell us. We understand thing happen from time to time and are more than happy to work with you.
There will be NO REFUNDS given on an item, UNLESS it is received DOA. Meaning, if it arrives broken or not as we described then we'll be happy to exchange it. If it was damaged during shipment, we'll have to file a claim with the carrier (only if insurance was purchased) and we'll refund the payment minus shipping charges.
International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.
|
Below is a guideline for determining if a set of saddlebags will fit on your bike. It works in most cases, but not all First you'll need a ruler or measuring tape. A. Take a side to side measurement: Measure side to side, from the back of the saddle, (riders position) to the arm of the directional signal, you'll need to compare this measurement with our length measurements of the desired saddlebag. This measurement should be greater than the bags length. (See image below for reference) B. Take a top to bottom measurement. Measure from the bottom of the seat pad to the top of the exhaust pipe as a reference. This measurement must be at least 1" inch greater than the height of the desired saddlebags (see picture below for reference). Measurement of bag are given in the item description of the listing.
With these measurements, you will have the sizing needed for YOUR specific bike, and be able to make your purchase without frustrating fitment issues. |
Use a screwdriver to remove the screws securing the motorcycle seat to the frame. Slide the seat forward then backward to remove the keyhole and tank brackets. A single screwdriver should be sufficient to remove the seat, depending on the bike model.
Untie the yoke, which is usually held together with leather or nylon strips. The yoke is the part of the saddle bags that goes under the seat.
Place each saddle bag where you want them to sit on your bike. The yoke lays under the seat, with a saddle bag on each side of the bike. The best location is usually over the shocks.
Mark where the yoke is positioned over the hardware on the bike and where it overlaps, using a permanent marker.
Remove the saddle bags. Lay them flat on the ground and place the yoke over an object, such as an old phone book. Make sure the marks you made line up with each other and that the pre-made holes line up. If they do not, drill holes through the yoke and tie them together with a strip of leather taken from the yoke. You are basically re-threading the yoke's ties.
Place the saddle bags back on your bike and position them.
Reinstall the motorcycle seat by replacing the screws.
Examine the saddle bags to make sure they are not resting on anything that may become entangled with them