EASY RETRO-FIT TO ANY EXISTING OR NEW PRESSURE PRESSURIZED PUMPED SEPTIC SYSTEM OR AEROBIC SYSTEM !!
THE PICTURE SHOWS THE SIM/TECH STF-100A2 INSTALLED/CONNECTED TO A TYPICAL EFFLUENT DISCHARGE PUMP (PUMP NOT INCLUDED IN THIS LISTING). THE STF-100A2 IS EASILY FIELD-ASSEMBLED (SCHEDULE 80 FITTINGS ON RIGHT SIDE OF ITEM TOWARDS THE TOP ARE NOT INCLUDED IN THIS LISTING) AND ALTHOUGH THE WHITE PVC PIPE AND UNION FITTING SHOWN IN THE PICTURE DO NOT COME WITH THE STF-100A2 FILTER YOU CAN ADAPT THE STF-100A2 TO ANY NEW OR EXISTING SYSTEM--THE PICTURE SHOWS ONE METHOD OF CONNECTION TO A SYSTEM, AND WE CAN ASSIST YOU WITH SUGGESTIONS AS TO HOW BEST CONNECT THE STF-100A2 TO YOUR SYSTEM !
WOULD YOU BUY A NEW CAR WITHOUT AN OIL FILTER ?? OF COURSE YOU WOULDN'T. BUT, DID YOU KNOW, THAT OVER 95% OF ALL SUPER-EXPENSIVE, NEW AND REPLACEMENT PRESSURE PRESSURIZED (PUMPED) SEPTIC SYSTEMS AND AEROBIC SYSTEMS ARE NOT INSTALLED WITH A PRESSURE FILTER ?? A GRAVITY-FLOW EFFLUENT FILTER BY ITSELF DOES NOT AND CAN NOT GET THE JOB DONE AS IT WAS NEVER DESIGNED OR INTENDED TO PROTECT PRESSURE PRESSURIZED SEPTIC OR AEROBIC SYSTEMS, IT WAS ONLY DESIGNED AND INTENDED TO BE USED IN NON-PRESSURE NON-PRESSURIZED, GRAVITY FLOW SEPTIC SYSTEMS !!
SPECIAL ATTENTION IS DIRECTED TO WISCONSIN MOUND, AT-GRADE, IN-GROUND PRESSURE AND SAND FILTER SYSTEMS:
DID YOUR MOUND BLOW-OUT OR EXPERIENCE LEAKAGE AT THE TOE OR ELSEWHERE ? IF SO, I CAN GUARANTEE YOU THAT THE INSTALLER FAILED AND NEGLECTED TO INSTALL THE SIM/TECH PRESSURE FILTER !! LOOK IN THE PUMP PUMPING CHAMBER TANK FOR YOURSELF AND YOU WILL NOT FIND THE SIM/TECH PRESSURE FILTER INSTALLED !! WHAT HAS HAPPENED IS THE DISTRIBUTION LATERAL (PIPE) ORIFICES (DRILL HOLES) HAVE PLUGGED BECAUSE THE LACK OF THE SIM/TECH PRESSURE FILTER HAS ALLOWED PARTICLES TO GET PUMPED OUT TO THE LATERALS WHICH HAVE CONSEQUENTLY JAMMED THE TINY DRILL HOLES IN THE DISTRIBUTION LATERALS...BET YOU WISH YOU HAD INSTALLED THE SIM/TECH PRESSURE FILTER AT THE TIME THE SUPER-EXPENSIVE SYSTEM WAS INSTALLED !!
DO IT YOURSELF DIY SEPTIC SYSTEM CUSTOMERS ARE OUR BREAD AND BUTTER, AND WE NEVER LOSE SIGHT OF WHOM WE PURPOSE TO SERVE AND PROVIDE THE FINEST SERVICE ON THE PLANET !
NO SALES TAX (Except WI and PayPal, eBay charging it according to their policies) !
FREE INUSRED UPS SHIPPING (lower 48 states only) !!
7 AM TO 10 PM CST SEVEN DAYS A WEEK IMMEDIATE CUSTOMER SERVICE AND ADDITIONAL INFORMATION FOR THIS PRODUCT !!
How the Sim/Tech Pressure Filter Works
The Sim/Tech pressure filter is extremely effective in providing protection for all pressurized distribution systems. If you need to protect a pressurized system from suspended solids, the STF-100A2 series filter can perform the job.
Most pressurized wastewater distribution systems such as mound systems are very effective in treating effluent. In pressurized systems the effluent or gray water is pumped from the holding or pump chamber of the septic system out to the drain field by a low pressure effluent pump. The drain field is where the problems show up. The lateral piping in the drain field has many small holes to drain the gray water. These holes can be as small as 1/8", as you might imagine, it doesn't take a lot of contaminants to plug the drain holes. With each hole that becomes plugged the efficiency of the pressure distribution system falls, until the system eventually fails.
Many of these systems only partially fail over a long period of time, causing contamination of ground water long before the system shows any visible signs of distress.
Placing an effluent filter just before entering the forced main of the pressurized septic system is a simple solution. The pressure filter installs by simply threading onto the discharge port of any effluent pump, thereby, filtering out contaminants before they enter the distribution system or drain field.
The SIM/TECH STF-100A2 effluent filter has been designed to assure that the small holes in the distribution piping remain unclogged. The filter system is unique to the industry, engineered to provide maximum protection for your sanitary pressure system.
Reliability: Because the STF-100A2 pressure filter is installed on the pressure side of the effluent pump, it is difficult for the internal filter mechanism to become clogged. The inherent design of effluent pumps create an on-and-off scrubbing action caused by shock waves as the effluent pump works. This scrubbing action is strongest near the pump, this is why the STF-100A2 wastewater filter is attached directly to the pressure side of the effluent pump.
The high flow rates and low pressure requirements of the STF-100A2 effluent filter are achieved by a large filter area with over 40% of the filter screen being open. The STF-100A2 pressure filter flows over 80 gallons per minute, so even a partially contaminated wastewater filter will keep virtually any pressurized distribution system functioning properly.
Ease of Use: The pressure filter assembly is installed and serviced in a matter of minutes, making this product unique to the industry. The STF-100A2 pressure filter easily threads onto the discharge port of any effluent pump. Also available is a uniquely designed, fully adjustable pressure switch that indicates when the effluent filter needs servicing. The pressure switch can be wired with its own alarm or connected in with the high level alarm. On the occasion when a filter does need cleaning, it can be removed easily, washed clean of debris and contaminants then reinstalled in the pressure filter assembly. The entire process takes only minutes.
The STF-100A2 effluent filter, with it's unique design and mounting location, allows the filtering screen to be scrubbed while in operation, providing maximum maintenance intervals with unmatched performance capabilities. The filter screen is a type 347 stainless steel with .062 diameter holes. It is 3 inches in diameter and 18 inches long with a 69.52 square inch open area. This large 41% open area allows the filter to pass 83.8 gallons per minute at 1 psi. With features like these even a partially clogged screen will keep the system well protected and working properly. This performance product assures quality effluent with lower TSS levels, keeping your pressurized distribution system functioning at 100% efficiency. Optional filter socks are available for use with the screen to filter down to 600, 190, or 100 microns (.024”, .007”, .004”).
The STF-100A2 pressure filter has been designed as an effluent filtering device for pressurized distribution systems. The STF-100A2 pressure filter protects any pressurized distribution system including Sanitary Mound Systems, Sand Filters, Spray Irrigation Systems, Drip Systems, Pressurized Chambered Systems, Commercial Pressurized Systems or any Pump Septic System, Wastewater Treatment Systems or Residential Pressurized Systems. The STF-100A2 effluent filter should be used as a safe guard component in all pressurized septic systems.
For full specs, go to:
http://www.gag-simtech.com/index_files/Page309.htm Refer to the information on the STF-100A2 model, which is the item offered in this listing.
PLEASE SEE SELLER'S OTHER ITEMS FOR ADDITIONAL ZABEL, POLYLOK AND BEST SEPTIC TANK EFFLUENT GRAVITY-FLOW FILTERS !
PLEASE CHECK OUT OUR DETAILED SELLER RATINGS !
THIS IS A GREAT OPPORTUNITY FOR YOU TO PURCHASE A PROFESSIONAL/COMMERCIAL GRADE HIGH-CAPACITY, HIGH FLOW, EASY TO INSTALL AND SUPER EASY TO PERIODICALLY CLEAN SEPTIC OR AEROBIC SYSTEM PRESSURE DISTRIBUTION EFFLUENT FILTER.
WE CONTINUE TO USE THIS EXACT FILTER IN OUR PROFESSIONAL RESIDENTIAL AND COMMERCIAL APPLICATIONS BECAUSE OUR CUSTOMERS HAVE NEVER EXPERIENCED A SEWER BACKUP CAUSED BY A COSTLY, FINANCIALLY DISASTROUS PLUGGED PRESSURE DISTRIBUTION SYSTEM, SUCH AS A MOUND, AT-GRADE, IN-GROUND PRESSURE SYSTEM OR SAND FILTER.
“Nobody cares about your on-site wastewater treatment and/or your pond/dockside aeration and de-icing problems as much as I do! Let me help you solve those problems, be it needing a new air pump, fine bubble tube diffuser for de-icing your dock area, aerating your pond or repairing or upgrading your existing aerobic or septic system or just talking over the problem and getting a different view on it.”
WE ENCOURAGE YOU TO CHECK OUT OUR "DETAILED SELLER RATING" AND COMPARE IT TO ANY AND ALL OTHER EBAY SELLERS. SIMPLY CLICK ON THE "SEE DETAILED FEEDBACK" AND THEN YOU WILL BE ABLE TO VIEW THAT SELLER'S "DETAILED SELLER RATING."
All information contained in this listing is copyright, all rights reserved, ©SUPERIOR ENVIRONMENTAL TECHNOLOGIES™, ©THE SEPTIC PROFESSOR™ and ©SEPTIC PROFESSOR™, 1996-2021.