eBay

G SCALE PIKO 35013 LGB OK 4 Ch Switch Decoder NEW

PIKO 35013 Switch Decoder

Environmentally Sealed
Weatherproof
Wireless Control with a PIKO or Massoth or ANY DCC system
Large Easy to Wire terminal strip
4 Output Channels
Easy CV Programming via PIKO Central Station & Navigator
LGB Compatible Operation

New in PIKO factory sealed box

Click here for more product details and larger photos

Buy it now Price: $120.99 NEW MSRP $139.99

For questions contact us by clicking on the link above

Factory sealed from ShourtLine.com, an authorized PIKO Dealer

Features:

Indoor/Outdoor weatherproof case - quick and easy install for any G Scale MTS or DCC system.

Features:

Made in GERMANY
2 year guarantee by PIKO America
Weather & Water Proof for Indoor and Outdoor operation
Easy Setup
Works with any G scale track
Installs in seconds
LGB Compatible
DCC Compatible
Indoor or Outdoor use
4 Outputs to operate up to 4 pairs of switch motor motors or signals

Specifications:

12-24V NMRA DCC or LGB MTS compatible
Total Current capacity 3 amps maximum
4 Outputs at 1.5 amps maximum
2 switch machine (PIKO 25271) per output
Operate either motor-drive or twin-solenoid switch machines
Switch addresses: 1 through 2047 per NMRA-DCC & LGB MTS standard
Dimensions: 95 x 64 x 23 (3.74" x 2.54" x .091")

MTS/DCC ready

Complete with instructions shown above

New in dealer in PIKO factory sealed packages

How to hookup the PIKO G Scale Track Power Clamps:

Easy to wire to track powered from an MTS/DCC controller or booster and up to 4 paris of any type switch motor
.1) Remove the top 4 screws and the top of the case revealing the circuit board & instructions inside the case.

2) Circuit board is easily removed or can be wired in the case bottom as shown above

Note the water proof seals and 4 soft rubber blades that seal wires from the weather and water when the top is replaced and screwed closed - the LED shows through the rubber seal in the top of the case for status indication

3) Wire to switch or solenoid motors and to track for power and DCC control.

Use the PIKO 35271 Electric Switch Machine for weather proof and waterproof maintenance free operation of your switch tracks (points) and/or signals

4) Optionally use your PIKO Central Station to change the switch addresses as desired by CV register configuration.

Connect the track terminals of your PIKO DCC Central Station to the power terminals of your PIKO Switch Decoder. Connect a wire to jumper between the top two terminals for programming programming and remove jumper to operate.

4) Connect power and operate you switch tracks using the wireless PIKO Navigator (see Navigator product for details)

Comes in a sealed factory box, complete with easy to follow programming and operating instructions. Wireless operate all your switch tracks and signals with the PIKO Digital System. Made in Germany

PIKO 35013 Switch Decoder

Click here for more product details and larger photos

For questions contact us by clicking on the link above

Thanks for looking - Shourt Line by Soft Works Ltd.