GT2 Precision Timing Belt for 3D printers and linear motion application. Cut to length. Price per 1 foot / 305mm.

Choose quantity to specify length in increments of 1 foot / 305mm. For example, buy quantity of 6 to get 72" / 1830mm

Bonus Pulley: 20 Teeth Precision GT2 Metal Timing Pulley. 20 Teeth, Length 12.50mm, Diameter 12mm, Bore 4.95mm / 5.15mm (Pilot). Pulley has no grub screw but easily installed with small vise or c-clamp. Last 2 pictures show exact pulley you will get.

Highest quality precision timing belt, not cheap Chinese replacement. Made from NEOPRENE - Synthetic Rubber reinforced with fiberglass cords for superior strength. Neoprene - oil-resistant substitute for natural rubber, was invented by DuPont scientists on April 17, 1930. Balanced combination of polymer's properties:

• Resists degradation from sun, ozone and weather
• Performs well in contact with oils and many chemicals
• Remains useful over a wide temperature range
• Displays outstanding physical toughness
• Resists burning inherently better than exclusively hydrocarbon rubbers
• Outstanding resistance to damage caused by flexing and twisting

Specifications:

• Belt Material: Neoprene (Synthetic Rubber)
  
• Belt Type: GT2 / P2M
  
• Pitch (mm): 2
  
• Belt Width (mm): 6
  
• Core Wire Material: Glass Fiber
  
• Circumference Length (mm): Open Loop
  
• Number of Teeth: N/A
  
• Belt Shape: Open End
  
• Belt Tooth Surface: Standard (Single Sided)
  
• Belt Shape Type: Round Tooth Profile High Torque
  

BONUS: YOU WILL GET ONE TIMING PULLEY WITH EVERY 3 FOOT BELT PURCHASED*

From RepRap forum
https://reprap.org/wiki/Choosing_Belts_and_Pulleys

To get the best print quality, we want to use a pulley and belt that are designed for linear motion. The GT2 series of belts are designed specifically for that purpose. They use a rounded tooth profile that guarantees that the belt tooth fits smoothly and accurately in the pulley groove, so when you reverse the pulley direction, there is no room for the belt to move in the groove. You should see an almost immediate increase in print consistency, especially around small holes and details.

Listing includes:

GT2 Open Belt 2mm pitch x 6mm wide. Cut to length in increments of 1 foot / 305mm.
*I will send you one or more timing pulleys (1 pulley with every 3 foot belt purchased).

Note: Stepper motors are not included

Posted with eBay Mobile