This
infrared thermometer is ideal for use in Food preparation, Safety and
Fireinspectors, Plastic molding, Asphalt, Marine and Screen Printing,
Measure inkand dryer temperature, Diesel and Fleet maintenance.
Targeting objects are easy with the bright laser beam. Even in the dark,
the display is easy to read withthe quality backlit scroll
Features:
1. User selectable ℃ or ℉
2. Laser Targeting
3. Automatic Data Hold
4. Auto Power Off
5. LCD Display
6. Overrange indication
Specifications:
|
HT-868 |
IR Temp.Range |
-50℃-800℃/-58℉ ~1472℉ |
User selectable ℃ or ℉ |
√ |
Optical Resolution |
12:1 |
Emissivity |
Fixed at:0.95 |
Basic Accuracy |
±2%±2℃ |
Resolution |
0.1℃ / ℉ |
Response time |
<1 second |
Laser Diode |
Output<1mW,630~670nm,class 2 |
Max,Min,AVG record |
√ |
High and low alarm |
√ |
Overrange indication |
√ |
Spectral Response |
8~14μm
|
Auto power off |
Auto power off about 20 seconds |
Operate temperature |
0 ~ 50℃(32 ~122℉) |
Weight: 145g
Dimensions: 134mm * 88mm * 36mm
Packing list: 1 x manual(Chinese), 1 x warranty card ,1 x 9V battery.
*
Sorry, English user manual is not available for this item.
Apply Range:- It can be widely used in the property, home, electricity, heating, ventilation, transportation and other fields, by scanning all on-site electronic devices - breakers, switches, transformers, fuses, bus and power strips to find the hot spots.
- Suitable for field testing HVAC supply / return air temperature: Detection of indoor air temperature, to ensure that air conditioning work. Also used to measure the movement of charged and difficult to access the object's temperature, to avoid foods, chemicals, medicines measurement cross-contamination and physical damage.
4 Field
1) to ensure that the measured object is larger than the instrument infrared circular light spot diameter.
2) The smaller the target, the thermometer should be closer to the target.
3) Make sure that the measured object area not less than twice the measuring point.
4) to ensure that the measured object is larger than the instrument infrared circular light spot diameter.
5 Hot positioning: To find a hot spot,
aim the thermometer outside the area measured, and then slowly moved up
and down the thermometer to scan the entire area until the test points
to determine hot spots.
6 Tips
1) can not be transmitted through the transparent surface of the instrument (such as glass) measurements.
2) Steam, dust, smoke, etc., from the surface barrier infrared instrument affect the measurement accuracy.
7 for measuring the distance and the
object target ratio: Optical measurement than the target and the object
distance D: S = 12:1, for example: the instrument field of view is 12:1,
the instrument from the measured object is 12 inches, then the measured
object not less than 1 inch in diameter. The following figure shows the
other distance measuring range: