Deutsche Beschreibung:
MiktoTik RBSXTG-2HnD, RouterBoard SXT 2
Der SXT ist ein kostengünstiges High-Speed Wireless Outdoor-Gerät im 2 GHz-Bereich. Der SXT kann für Punkt-zu-Punkt-Verbindungen verwendet werden, als CPE für Punkt-zu-Multipunkt-Installationen oder, aufgrund des weiten Öffnungswinkels der Antenne, auch als AP/Sektor eingesetzt werden. Mit einem Gehäuse und einer eingebauten 10 dBi-Antenne besitzt der SXT alles was Sie benötigen. Die Einrichtung ist eine Angelegenheit von wenigen Minuten.
- CPU: Atheros AR7241 400 MHz CPU
- Speicher: 32 MB DDR SDRAM onboard
- Ethernet: 1x 10/100/1000 (Gigabit) Ethernet-Port, L2MTU Frame Size bis 4076
- WLAN-Karten: Onboard dual-chain 2 GHz 802.11b/g/n Atheros wireless-Modul10 kV ESD-Schutz auf jedem RF-Port
- Extras: Resetschalter, Pieper, USB 2.0-Port, Strom- und Temperaturüberwachung
- LEDs: Power, Ethernet, 5x WLAN-Signal
- Stromoptionen:
- Power over Ethernet: 8 - 30V DC
- Wird mit 24 V DC/0.8 A Netzteil und passive PoE-Injektor geliefert
- Maße: 140 x 140 x 56 mm
- Gewicht ohne Verpackung, Adapter und Kabel: 265 g
- Stromverbrauch: Bis 7 W
- Betriebstemperatur: -30°C bis +80°C
- Betriebssystem: MikroTik RouterOS Level4-Lizenz (CPE oder AP als Sektor)
- Lieferumfang: SXT WLAN-Gerät mit integrierter Antenne, Mastmontagerhalterung, Montagering, PoE-Injektor, Netzteil, Kurzanleitung
- Zertifikate: FCC, CE, ROHS
- Antenne: Dua-polarisierte 2 GHz-Antenne, 10 dBi, -18 dB Port-zu-Port-Isolation
- Strahlweite: H-Plane, E-Plane typ. 60°
- RX-Empfindlichkeit:
- 802.11b/g : -96 dBm (at) 6 Mbps bis -80 dBm (at) 54 Mbps
- 802.11n: -95 dBm (at) MCS0 20 MHz bis -74 dBm (at) MCS7 40 MHz
- TX-Leistung:
- 802.11b/g: 32 dBm (at) 6 Mbps bis 29 dBm (at) 54 Mbps
- 802.11n: 32 dBm (at) MCS0/8 bis 25 dBm (at) MCS7/15
- Modulationen:
- OFDM: BPSK, QPSK, 16 QAM, 64QAM
- DSSS: DBPSK, DQPSK, CCK
English Description:
MiktoTik RBSXTG-2HnD, RouterBoard SXT 2
SXT is a low cost, high speed 2 GHz outdoor wireless device, now also
available with a Gigabit port. SXT can be used for
point-to-point links, as a CPE for point-to-multipoint installations or even as an AP/sector because of its wide beamwidth antenna. Complete with a ready to mount enclosure and a built-in 10 dBi antenna, the package contains everything you need to set it up in a matter of minutes.
- CPU: Atheros AR7241 400 MHz CPU
- Memory: 32 MB DDR SDRAM onboard
- Ethernet: 1x 10/100/1000 (Gigabit) Ethernet port, L2MTU frame size up to 4076
- Wireless cards: Onboard dual chain 2 GHz 802.11b/g/n Atheros wireless module 10 kV ESD protection on each RF port
- Extras: Reset switch, beeper, USB 2.0 port, voltage and temperature monitors
- LEDs: Power LED, Ethernet LED, 5 wireless signal LED
- Power options:
- Power over Ethernet: 8 - 30 V DC
- Packaged with 24 V DC/0.8 A power adapter and passive PoE injector
- Dimensions: 140 x 140 x 56 mm
- Weight without packaging, adapters and cables: 265 g
- Power consumption: Up to 7 W
- Operating Temp.: -30°C .. +80°C
- OS: MikroTik RouterOS, Level4 license (CPE or AP as sector)
- Package contains: SXT wireless device with integrated antenna, pole mounting
bracket, mounting ring, PoE injector, power adapter, quick setup guide - Certifications FCC, CE, ROHS
- Antenna: Dual polarization 2 GHz antenna, 10 dBi, -18 dB port-to-port isolation
- Beam-Width: H-Plane, E-Plane typ. 60°
- RX sensitivity:
- 802.11b/g : -96 dBm (at) 6 Mbps to -80 dBm (at) 54 Mbps
- 802.11n: -95 dBm (at) MCS0 20 MHz to -74 dBm (at) MCS7 40 MHz
- TX power
- 802.11b/g: 32 dBm (at) 6 Mbps to 29 dBm (at) 54 Mbps
- 802.11n: 32 dBm (at) MCS0/8 to 25 dBm (at) MCS7/15
- Modulations:
- OFDM: BPSK, QPSK, 16 QAM, 64QAM
- DSSS: DBPSK, DQPSK, CCK