Land Rover/Jaguar iCarsoft i930
Multi-System Diagnostic Scanner Tool

The iCarsoft i930 is a multi function diagnostic scanner and tester which has been designed specifically for Land Rover/Jaguar vehicles. It will enable you to read and clear diagnostic faults from main systems within your vehicle such as SRS airbags, ABS Anti-lock Brakes, engine & transmission modules. It will also allow you to read live data in real time format. We have tested the scanner on many vehicles with excellent results. Compared to higher priced kits on the market that do exactly the same as this kit, we feel it offers excellent value for its cost. The i930 is an easy to use, stand alone unit that will have you scanning your vehicle within minutes. Simply, plug it into the OBD II port and the device will boot up with step-by-step instructions. This scanner has a large, easy to read 2.8 inch color display accompanied by a user friendly interface. As an added bonus, the scanner is equipped with full OBDII capabilities.  This enables you to scan all engine readings and related trouble codes (check engine light) on ANY vehicle make/model 1996 and newer.


For the following Land Rovers 

1997 - 2013     FREELANDER & FREELANDER 2 (LR2)
1997 - 2004 and 2007 - 2012     DEFENDER
1999 - 2015     DISCOVERY 2, DISCOVERY 3 (LR3), DISCOVERY 4 (LR4)
2005 - 2015     RANGE ROVER SPORT (Supercharged and HSE)
1999 - 2015     RANGE ROVER (Supercharged and HSE)
2012 - 2015     EVOQUE

For the following Jaguars

1994 - 2015     XJ TYPE

2008 - 2015     XF TYPE
1997 - 2015     XK TYPE
2014 - 2015     F TYPE
1999 - 2008     S TYPE
2001 - 2009     X TYPE               


*** IMPORTANT *** If you are trying to determine if this tool will perform a particular task for your specific year and model Land Rover, please email us with questions.


OBDII Functions Include (for all makes and models 1996 and newer):

1. Read Codes
2. Erase Codes
3. I/M Readiness -- I/M Readiness indicates whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
4. Data Stream
5. Freeze Frame -- When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
6. O2 Sensor Test -- This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle’s on-board computer.
7. On-Board Monitoring -- This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
8. Evap System Test -- The EVAP test function lets you initiate a leak test for the vehicle’s EVAP system. Before using the system test function, refer to the vehicle’s service repair manual to determine the procedures necessary to stop the test.
9. Vehicle Information -- The option displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the test vehicle.
10.Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes
11.Turn off Check Engine Light (MIL), clear codes and reset monitors
12. Read live PCM datastream
13. Support CAN (Controller Area Network) and all other
14.Multilingual menu and DTC definitions- English, Spanish, and German, etc
15.Read pending DTCs
16.Read permanent DTCs
17. DTCs search
18. Supports all the OBDII/EOBD test modes include: CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
19. Works on all 2001 and later OBDII compliant PETROL European vehicles
20. Works on all 2004 and later OBDII compliant DIESEL European vehicles
21. Works on all 1996 and later OBDII compliant US and Asian vehicles
22. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
23. Comprehensive Help, Including OBD Parameter, Mode Explanations & More



System coverage (Land Rover & Jaguar Vehicles):

•  Engine
• PCM
• TCM/Gear box
• ABS
• RCM/ SRS/ Airbag
• ICCM/IP
• RLCM /Air Suspension
• BCM/BODY
• HVAC/Air Conditioning
• VDCM
• SASM/Steering
• TPM
• PBM
• Parking assist
• Parking Aid
• AHCM
• VICM/Security/Immo
• DDM
• DSM
• PDM
• PSM
• ATCM
• TCCM/Transfer Box
• ADCM
• SCM
• DRM
• Rain Sensor
• GSM
• Light check/Lighting
• OCS
• HCM
• ICM
• KVM
• Television

What's included:

  • Land Rover i930 Scan Tool with 4 ft. OBD II Cable

  • USB Cable

  • User Manual

  • Nylon Carry Case


Specifications:

  • Display: 2.8” Color screen , 320 x 240 pixel display with contrast adjustment

  • L * W * H: 135mm * 85 mm * 26mm

  • Net Weight:  250g

  • Power: 8V -- 24V

 


Shipping and Payment

Orders placed before 12pm PST will ship same day.  Otherwise, they ship within 24 hours.  Orders are shipped free of charge via USPS Priority Mail with tracking.  Shipping can be upgraded to USPS Express. Payment only accepted through PayPal.

Returns

In the rare event an item is defective or damaged, returns will be accepted within 14 days of receipt or a replacement part will be shipped to you free of charge. Item must be returned in the exact, unaltered condition with all pieces including the box.

Contact Us

For questions or comments, please contact us through the ebay system by clicking "Ask a Question" found below.  Be sure to contact us if you are unsure whether this scanner will work with your vehicle.  You may also call or text Matt with questions 9am-6pm PST 570-262-4806