1, Higher sync
speed than the first generation
--- The highest flash sync speed up to 1/320 second (some of
models may only reach
to 1/250s or less, difference combination of models of flash
and camera using may
achieved difference flash sync speed).
2, Adding the
Locking rings
3, Improved Flash /
Shutter control Buttons
4, Working for more
non Canon/Nikon cameras and single firing pin cameras
--- ALL Standard Hot shoe DSLR Camera
except Sony and Minolta.
Note: Canon cameras choose RF-603 II Canon version, Nikon
Camera choose RF-603 II Nikon version, other cameras can
choose any version.
5, Adding the power
switch for single transmitter
--- Set the power switch on TX (single transmit) or TRX
(transmit-receive automatic switch) state according to
different shooting requirement.
When it used as wireless triggering transmitter and flash
testing, set to "TX";
When it used as wireless triggering receiver, using shutter
release or other extended functions, set to "TRX".
set to OFF means turn off the power.
6,
Suit for first generation, you can use them together.
Functions:
1,
Remote Shutter Release
a), Wireless Remote Shutter Release
( On camera )--- You can mount one receiver into the camera
and connect it with the camera via the 2.5mm shutter
connecting cable, and can remote control the camera with
other receiver. You can use it to fulfill the function of
Auto-Focus, Continuous shooting, Long Exposure, Half-Way
Pressing, Full-way Pressing and Bulb.
b),
Remote Shutter Release ( off Camera )--- You can use
the single receiver to fulfill the function of remote
shutter release after you connect it with your camera via
the 2.5mm cable
Note: This product can
achieve wired /wireless remote shutter release function,
need to LS-2.5 series shutter connecting cable(or purchase)
according to the different cameras. When using the shutter
release, the power switch need to set in”TRX” state.
2,
Flash Trigger
a), To fire the Flash Speedlite --- one receiver can fire
one flash speedlite, one set of RF-603 can control 2pcs
Flash Speedlite at the same time.
b), To fire the Studio
Strobe light --- You need to purchase an extra 6.35mm cable.
3, You can use ABOVE TWO
FUNCTIONS simultaneousty
4,
The RF-603 II Nikon version and Canon version can be used
together
Type |
FSK 2.4GHz
wireless remote sustem |
Transmitter
Distance |
100M |
Channel |
16 Channels |
Release |
Half-way
press, Full-way Press |
Receiver
Interface |
one is 2.5mm
Socket, for shutter release |
one is
standard PC socket for flash Speedlite or
studio Strobe |
Battery Type |
AAA*2 |
Receiver
Stand-by time |
Up to 45hours
(Using AAA battery) |
Size |
Receiver : 37
x 30 x 81.5mm (W x H x D) |
|