eBay

I.Introduction:

The DMM to replace your bench-top one

0.02% DC and 0.1% AC basic accuracy
60,000 counts resolution
200KHz (max.) bandwidth
True RMS with fast ACV/ACA response
Dual channels measurement similar to a dual channels DSO (V+V, V+A)
RS-232C ASCII interface
Data logging (model 903 with 10,708 records for both channels)
Capacitance measurement
Free software (901,903)
1/3 the cost

II.Specification:

The following accuracy is specified for one single channel (channel 1 or channel 2). If dual channels are used at the same time, additional % of accuracy should be added to the listed accuracy. Please refer to the supplemental dual channels specification. The following accuracy is also specified for the ZEROED (relative) value. The accuracy is given as ±% of reading ± number of least significant digits.

Continuity : (

, open voltage 3V approx.)

Range	Resolution	Beeper	Overload Protection
999.99 Ω	0.01 Ω	< 40 Ω ( approx )	AC 1000V

Diode Test : (open voltage 3V approx.)

Range	Resolution	ShortCircuit Current	Overload Protection
3.0000V	0.0001V	0.8 mA typical	AC 1000V

Frequency :

Range ( Auto )	Resolution	Accuracy	Overload Protection
1Hz - 200KHz( sine wave )	0.0001Hz -100Hz	±0.02%±4dgts	AC 1000V
1Hz -2MHz (TTL)	0.0001Hz - 0.0001MHz	±0.005%±4dgts	AC 1000V

Duty Cycle : (%, TTL, 1Hz – 600KHz )

Range	Resolution	Accuracy	Overload Protection
0.001% - 9.999%	0.001%	±30d/KHz±30dgts	AC 1000V
10.00% - 100.00%	0.01%	±3d/KHz±3dgts	AC 1000V

Resistance: ( Ω )

Range	Resolution	Accuracy	Overload Protection
999.99 Ω	0.01 Ω	±0.15%±8dgts	AC 1000V
9.9999K Ω	0.0001K Ω	±0.09%±3dgts	AC 1000V
99.999K Ω	0.001K Ω	±0.09%±3dgts	AC 1000V
999.99K Ω	0.01K Ω	±0.09%±3dgts	AC 1000V
9.9999M Ω	0.0001M Ω	±0.2%±6dgts	AC 1000V
40.000M Ω	0.001M Ω	±1%±6dgts	AC 1000V

Capacitance: (

, auto range , and for film capacitor or better)

Range	Resolution	Accuracy 1
60.00nF	0.01nF	±0.8%±5dgts
600.0nF	0.1n F	±1.5%±5dgts
6.000 μ F	0.001 μ F	±1.5 %±5dgts
60.00 μ F	0.01 μ F	±2.0%±5dgts
600.0 μ F	0.1 μ F	±3.5%±5dgts

DC Voltage: (Input Impedance: 10M )

Range	Resolution	Accuracy	Overload Protection
60.000mV	0.001mV	±0.1%±5dgts 1	DC 1000V
600.00mV	0.01mV	±0.02%±3dgts	DC 1000V
6.0000V	0.0001V	±0.02%±3dgts	DC 1000V
60.000V	0.001V	±0.02%±3dgts	DC 1000V
600.00V	0.01V	±0.02%±3dgts	DC 1000V
1000.0V	0.1V	±0.04%±3dgts	DC 1000V

DC Current: (10A terminal is protected by a 10A fast blown, high energy fuse, and the terminal of μ A and mA is protected by 1A fast blown, high energy fuse )

Range	Resolution	Accuracy
600.00 μ A	0.01 μ A	±0.2%±10dgts
6000.0 μ A	0.1 μ A	±0.1%±10dgts
60.000mA	0.001mA	±0.2%±10dgts
600.00mA	0.01mA	±0.1%±10dgts
1.0000A	0.0001A	±0.1%±10dgts
10.000A 1	0.001A	±0.3%±10dgts

AC Current: (The accuracy is specified for a single channel for 5%-100% of range for 45Hz – 20KHz, True RMS, 10A terminal is protected by a 10A fast blown, high energy fuse, and the terminal of μ A and mA is protected by 1A fast blown, high energy fuse )

Range (ACA)	Resolution	Accuracy (50/60Hz)	Accuracy (45Hz - 1KHz)
600.00 μ A	0.01m A	±0.3%±20dgts	±0.4%±20dgts
6000.0 μ A	0.1m A	±0.3%±20dgts	±0.4%±20dgts
60.000mA	0.001mA	±0.3%±20dgts	±0.4%±20dgts
600.00mA	0.01mA	±0.3%±20dgts	±0.4%±20dgts
1.0000A	0.0001A	±0.3%±20dgts	±0.4%±20dgts
10.000A 1	0.001A	±0.5%±20dgts	±0.4%±20dgts

Range

(ACA)

Accuracy

(20Hz - 45Hz)

Accuracy

(1KHz – 10KHz)

Accuracy

(10KHz – 20KHz)

600.00 μ A

±1%±20dgts

±2%±20dgts

±1%±20dgts

6000.0 μ A

±1%±20dgts

±2%±20dgts

±1%±20dgts

60.000mA

±1%±20dgts

±0.5%±20dgts

±1%±20dgts

600.00mA

±1%±20dgts

±0.5%±20dgts

±1%±20dgts

1.0000A

±1%±20dgts

±1.5%±20dgts

Not Specified

10.000A 1

±2%±20dgts

±1.5%±20dgts

Not Specified

AC Voltage: The accuracy of ACV or AC mV is specified for 5%-100% of range from 20Hz – 10KHz, average sensing. Input Impedance is 10M , and overloaded protection is AC 1000V for all range. Accuracy is also specified for single channel (channel 1 or channel 2). If dual channels measurements are performed, additional specification of accuracy will be introduced. Please refer to the supplemental dual channels specification. Due to the wide bandwidth, the reading might not be zero when no inputs present. But the residual reading does not affect the listed accuracy. If the AC reading is less than 100 least significant counts, it is set to zero by the unit.

Range

(ACV)

Resolution

Accuracy

(50/60Hz)

Accuracy

(45Hz - 1KHz)

Accuracy

(20Hz - 45Hz)

60.000mV

0.001mV

±0.1%±20dgts

±0.3%±20dgts

±0.8%±25dgts

600.00mV

0.01mV

±0.1%±20dgts

±0.3%±20dgts

±0.8%±25dgts

6.0000V

0.0001V

±0.1%±20dgts

±0.3%±20dgts

±0.8%±25dgts

60.000V

0.001V

±0.1%±20dgts

±0.3%±20dgts

±0.8%±25dgts

600.00V

0.01V

±0.1%±20dgts

±0.5%±20dgts

±0.8%±25dgts

1000.0V

(0–400V)

0.1V

±0.1%±20dgts

±2%±30dgts

±0.8%±25dgts

1000.0V

(400-1000V)

0.1V

±0.1%±20dgts

(45Hz – 400Hz)

±2%±30dgts

±0.8%±25dgts

Range

(ACV)

Accuracy

1KHz–10KHz)

Accuracy

(10KHz–20KHz)

Accuracy

(20KHz-50KHz)

Accuracy

(50KHz-100KHz)

Accuracy

(100kHz-200KHz)

60.000mV

±2%±20dgts

±2.5%±20dgts

±4%±40dgts

Not Specified

600.00mV

±1%±20dgts

±2.5%±20dgts

±2%±40dgts

6.0000V

±1%±20dgts

±2.0%±20dgts

±2%±40dgts

60.000V

±1%±20dgts

±2.0%±20dgts

±4%±40dgts

Not Specified

600.00V

(0-400V)

±5%±20dgts

Not Specified

600.00V

(400-600V)

Not Specified

1000.0V

(0-400V)

±2%±40dgts

Not Specified

1000.0V

(400-1000V)

Not Specified

Supplemental Dual Channels Specification (DC – 400Hz): The following accuracy should be added to all the listed accuracy if dual channels measurements are performed.

ACV (Ch2)

DCV (Ch2)

ACA (Ch2)

DCA (Ch2)

ACV (Ch1)

±1%±( V1 - V2 ) 200 PPM (Ch1, Ch2)

±0.5%±(V1 - V2) * 20 PPM (Ch1, Ch2)

±0.1 μ A / V( μ A,Ch2)

±1 μ A / V (mA,Ch2)

±0.2mA / V (A, Ch2)

±2mV / A (mV, Ch1)

± 5mV / A (V, Ch1)

±0.25% (Ch1, Ch2)

DCV (Ch1)

±0.5%±(V1 - V2) * 20 PPM (Ch1, Ch2)

±0.25% (Ch1,Ch2

±0.25% (Ch1, Ch2)

General Specification

Battery Type

Display

5 + 5 digits LCD with 30 segments bar graph

Range Selection

auto and manual

Overload Indication

Power Consumption

6 mA ( approx )

Low battery Indication

Operating Temperature

-10 C to 50 C

Operating Humidity

less than 85% relative

Altitude

up to 2000M

Storage Temperature

-20 C to 60 C

Storage Humidity

less than 75% relative

Dimension

207mm(L) x 101mm (W) x 47mm (H)8.15" (L) x 4" (W) x 1.85" (H)

Weight

430g / 15.2oz (battery included)

Accessories

Users manual x 1

RS-232C interface cable

Shipping Policy
Payment Mathord
Returns Policy
About Feedback
Company Information
Contact

Shipping Policy

● Expedited Shipping(FedEx/DHL/TNT/UPS):TO USA 3-6 Workdays ,TO Other countries 3-8 Workdays

● Economy Shipping(Post/Airmail):TO USA 7-12 Workdays ,TO United Kingdom & Australia 20-35 Workdays , TO Other countries 20-50 Workdays

● This is normal condition,but sometimes int'l delivery is highly depended on the courier company and local customs/duties

● We only accept Paypal payment.We are not able to ship to PO Boxes or APO/FPO addresses

● Please make sure to provide us with correct , precise and detailed shipping Address

● And it would be better to leave us correct phone number,so the delivery man can get in touch with you easily when your package arrive .And we wouldn't use your phone number for other purpose.

● Order will be shipped out within 1 to 3 business days upon payment received or cleared.

● If you don't receive package over 30 business workdays , please notify us.

Payment Mathord

● PayPal payment accepted only.

● Items will be shipped to your eBay address. Please make sure it is correct.

● Payment must be received 4 days after auction ended.

Returns Policy

● Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your Purchase.

● If product is defective or damage upon arrival, or wrong product shipped, please contact us immediately. Returns accepted within 30 workdays of delivery date and item must be in original new condition, not worn or altered in any way with attached tags & wrap. Otherwise deal is final. Return shipping must be paid by buyer.

● Please contact us first if you have any problems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner.

About Feedback

● When you satisfied with our product and services please leave us positive feedback.

● If a problem occurs, just contact us using the " Ask the seller a question" link on eBay.

● We appreciate your Postive Feedback, and will do the same in return. DO NOT leave negative feedback without first communication with us. Please allow max 3 business days for us to response.

Company Information

Who we are ?

JEENDACONTROLS was founded in year 2006 , is a professional supplier of oem and aftermarket generator spare parts and accessories. We provide full range of spare parts and accessories for generating set which includ Leroy somer Alternator parts,Stamford Alternator parts,Marthon Alternator parts,Siemens Alternator parts,Cummins Genset parts,FG wilson Genset parts,Caterpillar genset parts,Perkins Genset parts.The regular products in stock such as AVR(Automatic voltage regulator),GAC and Cummins Speed Governor and Actuator,Deepsea generator controller panel,ComAp generator controller pannel,ATS(Automatic Transfer Swith),Oil pressure Sensors,meters,diode bridge,Battery chargers,Shut down Solenoid,Flame out Solenoid,Turbocharger,Soundproof Material,Water Jacket Heater,Canopy Locks and Hinges,Rain Cap,Lifting Hook,Anti-Vibration Mountings..etc. In one word,JEENDA aims to provide one-stop service for your generator spare parts demand.

Quality and Services:

The quality of our spare parts is very reliable because we have used original and genuine spart parts used by the original gensets manufacturer.For instance,Company A is using B Company's engine starter,then we buy directly from B Company for engine starter.We use some famous products such as cummins Speed Governor and Actuator which is original OEM parts supply to CCEC and DCEC,DEEPSEA controller panel etc.We also familiar with quality parts-and-accessories suppliers in China.The staff of JEENDA Machinery is honest,reponsible and considerate.They are with good experience in generator industry,too.That's because JEENDA people clearly understand that good professional service,good products serve people one-stop purchasing for genset spare parts for long-term.

Engine brands we serve:

Those engine brands which we can provide spare parts service includes Cummins(DCEC and CCEC),Perkins,Caterpillar,LOVOL,Yangdong,Weichai,YTO,WEICHAI DEUTZ,VOLVO,JCB,KUBOTA,BOBCAT,CARRIER,THERMO KING,Lister Peter,etc.

Future Development ......

JEENDACONTROLS will stay true to provide one-stop service for our customers.More and more new quality products will be developed and provided to world market.

We sincerely look forward to starting up long-term cooperation with all clients and suppliers from all over the world.

Contact

If you have any question before or after purchase , please feel free to contact us via eBay message , we will reply you within 24 hours .

PROVA-903 Dual Channels Digital Multimeter Continuity Diode Freque Tester Meter

DESCRIPTION