Welcome

53mm CNC 1" Riser Clip-On Handlebars for Ducati 848/1098/1198/StreetFighter
  Product Description

-The CNC machined Clip-On Handlebars are an economical replacement handlebar with amazing strength.
-They are machined from solid billet with a removable handlebar. In the event of a crash, you simply replace the handlebar tube instead of the entire Clip-on. 
-Handlebars sit at a 7 degree angle giving racers and street riders the ultimate handlebar position. 
-Lightweight, great looks, improved strength, adjustability and easy installation.

Specification & Features: 
-- Condition: 100% Brand New
-- Quantity: 1 Set (Left & Right)
-- Bar Length: 29.5cm 
-- Bar Size: 22.2 mm/Aprx 7/8 inch
-- Clip Ons Diameter: 53mm
-- Riser Clip-ons are 1" Raised
-- Color:Black

-- Economical Replacement Handlebar With Amazing Strength
-- CNC Machined From T6061-T6 Billet Aluminum
-- Hard Anodised Finishing For Increased Longevity
-- Ergonomic Design Minimizes Fatigue And Discomfort By Creating The Optimal Riding Position
-- Stainless Steel Fasteners and Delrin Plastic Ends Add The Finishing Touches
-- Removable Handlebar & Adjustable Motion Fore and Aft
-- Easy to Install, No Installation Instruction

Installation Note: 
Please Measure Your Fork Tubes Size Before Ordering, Make Sure It Will Fit Your Bike.
Some bikes may or may not fit without modification. You may need to drill small hole(s) in the throttle or clutch side handlebar tube(s) for the control switch housing.

Fitment:
Universal Fit Most 53mm Fork Tubes.

Ducati   748/916/996/998 (Will Fit with both Ohlins and Showa models)    
Ducati   749/999 (Will Fit with both Ohlins and Showa models)    
Ducati   848/1098/1198/StreetFighter (S / R Ver. )(Will Fit with both Ohlins and Showa models)    
Ducati   1199S/R Panigale        All Years

Aprilia   RSVR    2004
Aprilia   RSVR (Showa Ver.)     2009-2012
Aprilia   RSV Mille (But Not Fit "R" and "RSVR" models)    1998-2003
Aprilia   Falco / SL Mille             2000-2004
Aprilia   Tuono/R                        2003-2009
DISCLAIMER
Disclaimer: MypandaMotozhao parts are not sponsored or endorsed by, or affiliated with the brands its parts fit, including Harley-Davidson, Honda, Yamaha, Kawasaki, Suzuki, KTM, Duke, Husaberg, Husqvarna, BMW, Aprilia, Triumph, Piaggio, Ducati, MV Agusta, Moto Guzzi, Benelli, Buell, CF-Moto, Enfield, Hyosung, Indian, Beta, GASGAS, Sherco etc.

Payment Policy

  • For your safety and convenience,we process all payments through PayPal where all major Credit Cards are accepted (Amex, Visa, MasterCard, Discover, etc.).
  • Import duties, taxes and charges are NOT included in the item price or shipping charges. These charges are the buyer responsibility. Please check with your country customs office before buying.
  • Payment must be made within 7 days after you win the auction. Non-Paying bidders will be reported.

Shipping Policy

  • We do our best to ship it out within 1 business of receiving your order and provide tracking numbers on all orders.
  • Please note that we can only ship to addresses verified with PayPal or your credit card.
  • Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.
  • Delivery time might be longer if the item(s) be inspected by customs

Return & Refund

  • All our products come with a 30-Day Return Policy. If you would like to return your item and you are within 30 days of the purchase, and it is still in its original condition, you can return the item by contacting us through eBay messaging.
  • If you are not 100% satisfied, please let us know the Detailed Problem,We will give you a 100% satisfactory solution
  • If you received an incorrect, damaged, defective, or item not as described, contact us for a partial/full refund or replacement on our cost.
  • Buyer should pay for the return shipping fee if All NON-Seller Mistake returns for refund . (E.g. you brought wrong size or wrong item).

Feedback

  • We hope to give you a positive eBay experience by working hard, and we expect to receive a positive feedback and Detailed Selling Rating (DSR) of 5 Rating in ALL of the feedback categories (Item as described, Communication, Shipping Time and Shipping and handling charges) from the buyer upon receiving the item .
  • If you are not satisfied with our items or service, please don't hesitate to contact us before you leave any Neutral/Negative feedbacks, we will always try our best for 100% customer satisfaction.
  • Communication is the best way to solve problem. leaving a negative feedback will not help us solve any problems.

About Item

  • All items sold by us are being described to the best of our abilities, as accurate as possible, and with utmost conscientiousness on our part.
  • However, to avoid any potential oversights, I respectfully request your assistance in helping us to make this a mutually satisfactory transaction by THOROUGHLY reviewing item description and photos, and asking all questions PRIOR TO BIDDING.

Customer Satisfaction

  • Do not hesitate to contact us anytime before and after your purchase, we are committed to your 100% customer satisfaction.
  • We back our commitment with superb service, 100% full money back and a customer satisfaction guarantee.
  • Our goal is to make sure you are a happy customer and pleasant shopping with us.

Visit Our Store For Best Deal! Mypanda Moto Store
-The CNC machined Clip-On Handlebars are an economical replacement handlebar with amazing strength.
-They are machined from solid billet with a removable handlebar. In the event of a crash, you simply replace the handlebar tube instead of the entire Clip-on. 
-Handlebars sit at a 7 degree angle giving racers and street riders the ultimate handlebar position. 
-Lightweight, great looks, improved strength, adjustability and easy installation.

Specification & Features: 
-- Condition: 100% Brand New
-- Quantity: 1 Set (Left & Right)
-- Bar Length: 29.5cm 
-- Bar Size: 22.2 mm/Aprx 7/8 inch
-- Clip Ons Diameter: 53mm
-- Riser Clip-ons are 1" Raised
-- Color:Black

-- Economical Replacement Handlebar With Amazing Strength
-- CNC Machined From T6061-T6 Billet Aluminum
-- Hard Anodised Finishing For Increased Longevity
-- Ergonomic Design Minimizes Fatigue And Discomfort By Creating The Optimal Riding Position
-- Stainless Steel Fasteners and Delrin Plastic Ends Add The Finishing Touches
-- Removable Handlebar & Adjustable Motion Fore and Aft
-- Easy to Install, No Installation Instruction

Installation Note: 
Please Measure Your Fork Tubes Size Before Ordering, Make Sure It Will Fit Your Bike.
Some bikes may or may not fit without modification. You may need to drill small hole(s) in the throttle or clutch side handlebar tube(s) for the control switch housing.

Fitment:
Universal Fit Most 53mm Fork Tubes.

Ducati   748/916/996/998 (Will Fit with both Ohlins and Showa models)    
Ducati   749/999 (Will Fit with both Ohlins and Showa models)    
Ducati   848/1098/1198/StreetFighter (S / R Ver. )(Will Fit with both Ohlins and Showa models)    
Ducati   1199S/R Panigale        All Years

Aprilia   RSVR    2004
Aprilia   RSVR (Showa Ver.)     2009-2012
Aprilia   RSV Mille (But Not Fit "R" and "RSVR" models)    1998-2003
Aprilia   Falco / SL Mille             2000-2004
Aprilia   Tuono/R                        2003-2009

On 13/01/2024 at 14:49:08 AEDT, seller added the following information:

DataCaciques
ibay365