30A High-Power 12V DC 3-phase Brushless Motor
Speed Control PWM Controller drive
Description:
This controller is design for High power High speed DC brushless motor
Rated Voltage: DC 6-12.8V (Recommened 12V, Not more than 12.8V)
Current Rating: 32A (Within 5s, max current can not exceed 40A)
Nominal Power: 360W
Signal Voltage: 5V 0.5A
Temperature Protection: 110℃
Speed Range: 8%~98%
For Motor Poles: 2-18 pole
Start: flexible start / immediate start
Brake: reverse load / no brake
Speed signal: 8KHz / 16KHz fixed frequency PWM
Servo test Function: 55g or Less
Programmable Function: Governor is based on MCU control microsystems, some features may make changes, base on the need of its programmable function (We don't provide instruction details)
Servo test Function: if you not use this function, please aviod it.
Board Size: 24 x 32mm
This controller only for 12V 3-Phase motor
Insturctions
Starting System Process:
1, The accelerator potentiometer adjust to a minimum (face the word "SOP8", Counterclockwise)
2, Connect the battery, the buzzer sounds, "123", indicating that the power supply is normal.
3, Buzzer sound N times short beep, indicating that the system is to identify the type and numbers of batteries.
4, Then a long beep, system identification is complete, adjust the accelerator potentiometer, motor running.
The first time you use a linear accelerator stroke identification, or replace the motor, make the following settings.
1, The accelerator potentiometer adjust to maximum (face the word "SOP8", clockwise)
2, Connect the battery, the buzzer sounds, "123", indicating that the power supply is normal.
3, Buzzer sound 2 beeps "bi","bi", immediately adjust the potentiometer to minimum.
4, Buzzer sound N times short beep, and then two short beeps, indicating that the system recognizes completion. accelerate the motor running.
Packing List:
1pcs x DC12V 3-phase Brushless High-Power Motor Speed Controller
(Not included the motor and alligator clips)