Mitsubishi (recent) & Peugeot / Citroen - USB3 iPhone Android integration kit
GROM-USB3 interface makes it easy to enjoy your music while driving. With plug-and play connection your mobile phone or USB stick becomes an in-car media centre. Optional Bluetooth Dongle adds hands free calling and wireless audio streaming.
|
MITS08 Cable suitable for the following vehicles:
- Citroen C-Crosser 2007-2012 (no NAV)
- Citroen Aircross 2012-2014 (no NAV)
- Mitsubishi Lancer 2008-2014 (no NAV)
- Mitsubishi Outlander 2008-2013 (no NAV)
- Mitsubishi Outlander Sport 2011-2014 (no NAV)
- Mitsubishi I-MiEV 2012-2013 (no NAV)
- Mitsubishi RVR 2010-2014 (no NAV)
- Mitsubishi ASX 2011-2014 (no NAV)
- Peugeot 4007 2007-2012 (no NAV)
- Peugeot 4008 2012-2014 (no NAV)
* May work on other models not listed providing CD port is present.
Note: Older Mitsubishi vehicles require the round MITS02 connection, more recent models and some Peugeot/Citroen require the rectangular MITS08 connection, if close to the cutover year it is advisable to check.
Unsure? Download the full vehicle application guide
- Step 1 - remove the factory head unit (see FAQ's or video clips for further help)
- Step 2 - connect the Data Cable (Vehicle Specific Cable) into the typically empty CD changer port on the rear of the unit.
- Step 3 - plug the other end of the data cable into the GROM interface which is small enough to leave behind the stereo or ideally route into the glove box.
- Step 4 - connect your chosen accessory cables/USB cable and route to your preferred location around the drivers area.
- Step 5 - re-install head unit and enjoy.
Video Clips:
eBay's new 2017 active content policy now means we cannot show relevant product usage and installation clips, however they are still available on GROM Audios YouTube Channel
Data Cable:
Each kit comes with one vehicle-specific cable (Data cable) for connection between the interface and the CDC port on the rear of the head unit.
Older Mitsubishi vehicles use the MITS02 cable, more recent models and some Peugeot/Citroen use the MITS08 cable, if close to the cutover year it is advisable to check.
MITS02 cable harness instructions
MITS08 cable harness instructions
Device Compatibility:
USB compatibility:
-
-
- USB port accepting USB media (stick / thumb drive / hard drive) - (64GB max)
- MP3, M4A, OGG, FLAC, AAC, WAV music supported
-
Apple compatibility via USB port:
-
-
- All iPods, iPads, iPhones (Lightning ) including 13 (requires your phones USB cable)
-
Bluetooth compatibility via Bluetooth dongle:
-
-
- Any phone with Bluetooth inc. iPhones, Android based phones, Windows phones etc.
-
Downloads:
Specifications:
- Automotive grade USB extension cable with latch-style connectors
- Operating Temperature: -40C - +85 C (-50F - 200 F)
- Operating current: ~220mA
- Standby current: ~1mA
- SN Ratio: 95dB
- DAC resolution: NA
- Distortion: < 0.01%
- Dimensions: W / H / D - 60* 73 * 20 mm
- Weight: 60g
- Enclosure: black metal
Kit Contents:
- Car stereo adapter in metal enclosure
- Vehicle specific cable #MITS08
- User manual
- USB extension cable
Optional accessories and upgrades - sold separately:
- Bluetooth Dongle (BTD)
- Aux-in 3.5mm jack & female USB for charging (35UB)
GROM-USB3 interface makes it easy to enjoy your music while driving. With plug-and play connection your mobile phone or USB stick becomes an in-car media centre. Optional Bluetooth Dongle adds hands free calling and wireless audio streaming.
|
MITS08 Cable suitable for the following vehicles:
- Citroen C-Crosser 2007-2012 (no NAV)
- Citroen Aircross 2012-2014 (no NAV)
- Mitsubishi Lancer 2008-2014 (no NAV)
- Mitsubishi Outlander 2008-2013 (no NAV)
- Mitsubishi Outlander Sport 2011-2014 (no NAV)
- Mitsubishi I-MiEV 2012-2013 (no NAV)
- Mitsubishi RVR 2010-2014 (no NAV)
- Mitsubishi ASX 2011-2014 (no NAV)
- Peugeot 4007 2007-2012 (no NAV)
- Peugeot 4008 2012-2014 (no NAV)
* May work on other models not listed providing CD port is present.
Note: Older Mitsubishi vehicles require the round MITS02 connection, more recent models and some Peugeot/Citroen require the rectangular MITS08 connection, if close to the cutover year it is advisable to check.
Unsure? Download the full vehicle application guide
- Step 1 - remove the factory head unit (see FAQ's or video clips for further help)
- Step 2 - connect the Data Cable (Vehicle Specific Cable) into the typically empty CD changer port on the rear of the unit.
- Step 3 - plug the other end of the data cable into the GROM interface which is small enough to leave behind the stereo or ideally route into the glove box.
- Step 4 - connect your chosen accessory cables/USB cable and route to your preferred location around the drivers area.
- Step 5 - re-install head unit and enjoy.
Video Clips:
eBay's new 2017 active content policy now means we cannot show relevant product usage and installation clips, however they are still available on GROM Audios YouTube Channel
Data Cable:
Each kit comes with one vehicle-specific cable (Data cable) for connection between the interface and the CDC port on the rear of the head unit.
Older Mitsubishi vehicles use the MITS02 cable, more recent models and some Peugeot/Citroen use the MITS08 cable, if close to the cutover year it is advisable to check.
MITS02 cable harness instructions
MITS08 cable harness instructions
Device Compatibility:
USB compatibility:
-
-
- USB port accepting USB media (stick / thumb drive / hard drive) - (64GB max)
- MP3, M4A, OGG, FLAC, AAC, WAV music supported
-
Apple compatibility via USB port:
-
-
- All iPods, iPads, iPhones (Lightning ) including 13 (requires your phones USB cable)
-
Bluetooth compatibility via Bluetooth dongle:
-
-
- Any phone with Bluetooth inc. iPhones, Android based phones, Windows phones etc.
-
Downloads:
Specifications:
- Automotive grade USB extension cable with latch-style connectors
- Operating Temperature: -40C - +85 C (-50F - 200 F)
- Operating current: ~220mA
- Standby current: ~1mA
- SN Ratio: 95dB
- DAC resolution: NA
- Distortion: < 0.01%
- Dimensions: W / H / D - 60* 73 * 20 mm
- Weight: 60g
- Enclosure: black metal
Kit Contents:
- Car stereo adapter in metal enclosure
- Vehicle specific cable #MITS08
- User manual
- USB extension cable
Optional accessories and upgrades - sold separately:
- Bluetooth Dongle (BTD)
- Aux-in 3.5mm jack & female USB for charging (35UB)