Zoom F8 Multi-Track Field Recorder

MFR# ZF8

Full Manufacturer Warranty

The Zoom F8 Multi-Track Field Recorder is designed for professional and enthusiast recording applications on set and in the field, including music, filmmaking, and electronics news gathering (ENG). Designed to be carried by a shoulder strap or in a bag, the unit features eight analog input channels with lockable XLR/TRS combo jacks that provide +75 dB maximum input gain, and support for +4 dB inputs with an EIN of -127 dBu or less. It can record up to 10 tracks simultaneously (channels 1-8 plus a stereo mix), or up to eight channels when recording at the A/D converter's maximum 24-bit 192 kHz resolution.

Alternatively, you can perform dual-channel recording of separate files at lower volume levels to ensure you have backup recordings to use when unexpected loud noises distort the primary recording. A newly designed limiter provides up to 10 dB of headroom. The unit supports SMPTE time code input and output. Included in the outputs is a powerful 100 mW + 100 mW headphone jacks as well as the MAIN OUT 1/2 and SUB OUT 1/2 jacks so you can send the audio signal to a video camera or other device while monitoring with headphones.

The unit's internal mixing capability enables flexible routing, and the inclusion of individually selectable +24V/+48V phantom power ensures you can use your favorite condenser microphones.

Power to the recorder can be supplied in one of three ways: via AA batteries, an AC adapter, or a 9 to 16V external DC power supply. Two SDXC card slots can be used simultaneously for recording even longer sessions, and can also be used as card readers when connected to a computer via USB.

When operating via USB, the unit can be used in a 2-in/2-out configuration as well as an 8-in/4-out audio interface (driver required for windows). A built-in slate mic allows you to make voice memos and the unit's slate tone can be used to confirm specific levels.

Among the most innovative features of the recorder is support for the company's interchangeable microphone capsules.

Analog Inputs: Provides two sets of lockable XLR/TRS combo jacks with EIN of -127 dBu or less, +75 dB maximum input gain and support for +4 dB input

Audio Resolution: Records up to 192 kHz at 24-bit resolution

Simultaneous Recording: Records up to 10 tracks simultaneously with channels 1-8 and a stereo mix (left and right). Up to eight tracks can be recorded at a sampling rate of 192 kHz

Dual-Channel Recording of Separate Files at Lower Levels: Records backup recordings at a lower input level to help prevent unexpected loud noises from distorting the recording

Limiter: Provides 10 dB of headroom with a threshold that can be set by the user

Supports SMPTE Timecode I/O: Uses a high-precision oscillator that enables the generation of accurate time code with a discrepancy of less than 0.2 frames per 24 hours

Outputs: Allows you to send the audio signal to a video camera or other device while simultaneously monitoring

Mixer Functionality: Allows for inputs 1-8 to be routed to outputs freely

Phantom Power: Supports +24V and +48V phantom power

Three Possible Power Supplies: Can operate on AA batteries, an AC adaptor, or a 9 to 16 V external DC power supply (not included) with automatic switching between power supplies

Two SDXC Card Slots: Allows for SD card recording, and the use of SDXC cards enables extended recording capability. The unit can also be used as a card reader by connecting it to a computer via USB

USB Audio Interface Capabilities with up to 8 Ins and 4 Outs: Allows the unit to be used as a 2-in/2-out audio interface as well as an 8-in/40-out audio interface (driver required for Windows, not required for Mac)

Built-In Microphone: Works as both a slate mic as well as a tool for voice memos

Zoom Mic Capsule Functionality: Supports the company's line of interchangeable mic capsules that can be used instead of inputs 1/2

Specifications

Inputs
Connectors	8x XLR/TRS combo jacks

XLR Inputs
Input Gain	+10 to +75 dB
Input Impedance	3.3 kOhms
Maximum Input Level	+14 dBu (at 0 dBFS, limiter ON)
Phantom Power	+24/+48 V 10 mA maximum for each channel

Line Inputs
Input Gain	-10 to 55 dB
Input Impedance	22 kOhms
Maximum Input Level	+34 dBu (at 0 dBFS, limiter on)
Equivalent Input Noise	-127 dBu or less (A-weighted, +75 dB input gain, 150 ohms)
Frequency Response	10 Hz to 80 kHz
Dynamic Range	120 dB typ (-60 dBFS input, A-weighted)
Crosstalk	-69 dB or less (between adjacent channels, 1 kHz)
Mic	Capsule: Zoom mic capsule input (use disables inputs 1/2) Slate Mic: Built-in mic for voice memos can be assigned to tracks freely

Main Outputs
Connectors	Main Out 1/2: TA-3 Connectors, balanced output (2: hot) Sub Out 1/2: 3.5 mm stereo mini unbalanced output jack Headphone: 1/4" unbalanced stereo output jack
Output Impedance	Main Out 1/2: 150 ohms or less Sub Out 1/2: 150 ohms or less Headphones: 15 ohms or less
Reference Output	Main Out 1/2: -10 dBV (normal output types), -40 dBV (mic output type, 1 kHz, 600 ohms load Sub Out 1/2: -10 dBV (normal output types), -40 dBV (mic output type, 1 kHz, 10 kOhms load
Maximum Output Level	Main Out 1/2: +10 dBV (normal output type), -20 dBV (mic output type), 1 kHz, 600 ohms load Sub Out 1/2: +10 dBV (normal output type), -20 dBV (mic output type), 1 kHz, 600 ohms load Headphone: 100 mW + 100 mW (1% or lower THD+N, 32 ohm load)
Dynamic Range	D/A: 106 dB typ (-60 dBFS input, A-weighted)

Recording Formats
Supported Formats	WAV: 44.1/47.952/48/48.048/88.2/96/192 kHz, 16/24-bit, mono/stereo//2-10 ch poly, BWF and iXML MP3: 128/192/320 kbps, 44.1/48 kHz, ID3v1 tags
# Of Simultaneous Record Tracks	WAV: 10 (8 inputs + stereo mix) MP3: 2

Recording
Time	Using a 32 GB card: 30:51:00 (48 kHz/24-bit stereo WAV), 7:42:00 (192 kHz/24-bit stereo WAV)

Time Code
Connector	BNC
Modes	Off, Int Free Run, Int Record Run, Int RTC Run, Ext, Ext Auto Rec (audio clock can be synchronized to Timecode)
Frame Rates	23.976ND, 24ND, 25ND, 29.97ND, 29.97D, 30ND, 30D
Precision	±0.2 ppm
Input Level	0.2 - 5.0 Vpp
Input Impedance	4.6 kOhms
Output Level	3.3 Vpp
Output Impedance	50 ohms or less

Power
Batteries	8x AA
AC Adapter	AD-19 DC12V 2A (center plus)
External DC Source	HIROSE HR10A-7R-4S 4-pin connector (1 pin: −, 4 pin: +), 9-16 V
Battery / Runtime	When recording 2 channels at 48 kHz/16-bit Alkaline Batteries: 7 hours or more NiMH (2450 mAh): 9.5 hours or more When recording 8 channels at 48 kHz/24-bit Alkaline batteries: 2.5 hours or more NiMH: 7 hours or more When recording 8 channels at 192 kHz/24-bit with headphones, phantom power and display backlighting NiMH (2450 mAH): 1.5 hours or more
Display	2.4" full-color LCD (320 x 240)
USB	Class: USB 2.0 high speed
Interface	As multi-track audio interface operation Class: USB 2.0 high speed Specifications: 44.1/48/96 kHz sampling rate, 16/24-bit bit rate, 8 in/4 out Stereo Mix audio interface operation (no driver required) Class: USB 2.0 full speed Specification: 44.1/48 kHz sampling rate, 16-bit rate, 2 in/2 out
Dimensions (W x D x H)	7.02 x 5.50 x 2.16" (178.2 x 139.8 x 54.8 mm)
Weight	2.1 lb (0.95 kg)

US Shipping (48 states)

FedEx Ground delivery time (48 States) :       3-5 business days

APO addresses can only be delivered by USPS, if another option is chosen by the buyer, Studio AMG reserves the right to change the shipping method without consent from the buyer, but at no additional charge.

If you would like a quicker delivery time than is listed, please contact us on Skype and we will try to accommodate requests.

International Shipments

* All international buyers should confirm shipping prices BEFORE the purchase

*Due to shipping restrictions, this product cannot ship via FedEx to Russia. USPS shipping only

We do not ship with DHL or UPS - only FedEx and USPS

USPS Priority International delivery time:        3-5 weeks*

USPS Express International delivery time:       2-3 weeks*

FedEx International Economy delivery time:   3-8 business days*

* Shipping times are estimates from past customers order dates to when they actually receive the product. The other USPS shipping times quoted on EBay come directly from USPS and are found to often be inaccurate. Studio AMG cannot be held responsible for delays in the shipment caused by the 3rd party shipping companies or the customs process.

Delivery time can vary and is greatly affected by both, the infrastructure of the shipping services and the customs process, in the destination country.

The buyer is fully responsible for obtaining information regarding customs charges in their country and paying any associated fees, Studio AMG does not pay the customs charge. If you have questions about customs or need assistance, contact us on Skype.

In the event that an item is more expensive to ship, the buyer will either be responsible for covering the additional costs to ship the item, or have the option to cancel the transaction entirely. Please confirm international shipping prices before bidding or buying by sending your destination shipping address and your desired shipping method that we offer.

* By buying or bidding on an item, you agree to the following:

In the event that a buyer chooses to return an item within 14 days, the buyer will be responsible for paying shipping fees back to our facility where the returned package will be inspected by our staff; this includes international buyers. If the item is deemed resalable as the condition in which it was sold, a refund will be given minus the original cost of shipping to the customer. In the case that the item cannot be resold in its original condition, a restocking fee and the original cost of shipping to the customer will be subtracted from the refund amount. This restocking fee starts at 20%, and may be higher depending on the condition of the item upon return (i.e. broken seals, ripped packaging, damaged product, missing accessories, etc.). If a package reaches the destination country and is refused by the buyer or is returned, the buyer will be responsible for the cost of all shipping charges to and from the country.

In an event the unit needs to be serviced under the manufacturer warranty, the buyer is responsible for contacting the manufacturer and paying for any shipping fees associated with service or repair. Your receipt from PayPal is the only receipt that is issued and is used for proof of purchase with manufacturers.

Please contact us with any additional questions as we cannot be held responsible for incorrect assumptions or questions that were not asked before the purchase or bidding.