Aluminum GT2 Pulley. Comes with 2 grub screws and tool.
You can also add timing belt (5 or 10ft) and idler pulley
Stepper motors are not included
Material: Aluminum
Pitch: 2mm (GT2)
Number of Teeth: 60
- Pulley:
Material: Aluminum
Pitch: 2mm (GT2)
Number of Teeth: 60
*See pictures for specs.
Highest quality precision timing belt, not cheap Chinese replacement. Made from NEOPRENE - Synthetic Rubber reinforced with fiberglass cords for superior strength. Neoprene - oil-resistant substitute for natural rubber, was invented by DuPont scientists on April 17, 1930. Balanced combination of polymer's properties:
Resists degradation from sun, ozone and weather
Performs well in contact with oils and many chemicals
Remains useful over a wide temperature range
Displays outstanding physical toughness
Resists burning inherently better than exclusively hydrocarbon rubbers
Outstanding resistance to damage caused by flexing and twisting
Specifications:
Belt Material: Neoprene (Synthetic Rubber)
Belt Type: GT2 / P2M
Pitch (mm): 2
Belt Width (mm): 6
Core Wire Material: Glass Fiber
Circumference Length (mm): Open Loop
Number of Teeth: N/A
Belt Shape: Open End
Belt Tooth Surface: Standard (Single Sided)
Belt Shape Type: Round Tooth Profile High Torque
- Timing Belt:
Highest quality precision timing belt, not cheap Chinese replacement. Made from NEOPRENE - Synthetic Rubber reinforced with fiberglass cords for superior strength. Neoprene - oil-resistant substitute for natural rubber, was invented by DuPont scientists on April 17, 1930. Balanced combination of polymer's properties:
Resists degradation from sun, ozone and weather
Performs well in contact with oils and many chemicals
Remains useful over a wide temperature range
Displays outstanding physical toughness
Resists burning inherently better than exclusively hydrocarbon rubbers
Outstanding resistance to damage caused by flexing and twisting
Specifications:
Belt Material: Neoprene (Synthetic Rubber)
Belt Type: GT2 / P2M
Pitch (mm): 2
Belt Width (mm): 6
Core Wire Material: Glass Fiber
Circumference Length (mm): Open Loop
Number of Teeth: N/A
Belt Shape: Open End
Belt Tooth Surface: Standard (Single Sided)
Belt Shape Type: Round Tooth Profile High Torque
- Idler
Type: Flanged
Pitch: 2mm (GT2)
Number of tooth: 20
Flange Diameter: 18.00mm
Height: 9.00mm
Bore: 5.00mm*
Number of tooth: 20
Flange Diameter: 18.00mm
Height: 9.00mm
Bore: 5.00mm*
Max Belt Wide: 6.00mm
Bearing: 2 x MR95ZZ (5 x 9 x 3mm)
*We also carry idlers without teeth and 3mm bore, please contact if needed
