Project "Divergence Meter" has modular system, so you can build Clock with 4, 6 or 8 Tubes To build Cock with 6 Tubes you need one MCU Control Board NCM109 and Tubes Board NCT318 To build 8 Tubes Clock you need additional one Tubes Board NCT818 To build Clock on 4 Tubes you need cut the Tubes Board along the line (as shown on photo)
DIY KIT is compatible with Arduino UNO, it allows you to write your own unique programs on the Arduino platform All the latest sources are always available on our github.com/afch/NixieClock
PCB Design Schematics Case and Software made by GRA & AFCH
example of assembled IN-18 Nixie Clock (glass Columns are sold separately)
Listing includes:
Tubes NCT318 and Control NCM109 Boards Bare PCBs
Set of Electronic Parts and Components for NCT318 and NCM109 Boards
Set of Hex Spacers and Screws for NCT318 and NCM109 Boards
Set of Socket Pins for 6 IN-18 Nixie Tubes (included with the KIT)
NE2H Neon Bulbs for Dots – 3 pcs (2 Neons for Dots and one spare)
Principal Electrical Schemes for NCT318 and NCM109 Boards
BOM Lists for NCT318 and NCM109 Boards
User Manual on vintage style paper
Power supply is NOT included buy it separately: www.ebay.com/itm/182053434777
*The MCU board support a variety of tubes, such: ZM1042, Z522M, Z566M, Z5220M, ZM1040, Z5660M, B566M, LC-631, IN-14, IN-18, IN-12, IN-8, IN-7, IN-1, IN-2, IN-4, IN-8, IN-15, IN-16, IN-17 to use this tubes You need appropriate tubes PCB(s)
Dear customers! If you have ANY questions, PLEASE ASK us
Software Features:
Clock support many kinds of Nixie tubes (4 tubes [hh:mm], 6 tubes [hh:mm:ss] and 8 tubes [HH:MM:SS:uu**/Temp]). ** – shows 100’s and 10’s of micro seconds.
12/24 hour format.
Date format 6 tubes: [DD:MM:YY] and tubes 8: [DD:MM:YYYY]
Slot Machine (Anti poisoning – tubes saving function. Increases the service life).
Unique RGB LEDs backlight with 16,7 million colors.
Very easy to switch LEDS off/on.
As alarm sound clock uses standard RTTTL (Nokia format) melodies, so You can easy change it. (included songs: mission impossible, we wish you).
Easy updating firmware via USB using Arduino IDE.
Software based on Arduino sketch, so MCU has Arduino bootloader within.
Power On Self-Test (POST): LED backlight, tubes and sound. You can check firmware version at the end. Unique detailed tube test – our soft check each segment on every lamp. Distinguishable to see segment failure.
Hardware Features:
Special schematic that prevent “blue spot” effect inside IN-18 tubes
Full static displaying mode
No flickering
High brightness
High contrast
High precision Real Time-Clock chip DS3231SN
Integrated High Voltage Power supply 150 - 220V
3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. It can be disabled in the menu (see manual)
Test points for testing, adjust and control low and high voltage circuits
Pads for internal buttons and terminals for external buttons
Pads for internal USB connector and terminals for external USB
Terminals for internal and external power connector
2 dots column with separate controls upper and lower dots (sold separately)
Power consumption: 12V, 1000mA (Recommended power source: voltage 12V, current 1-2A)
MCU board NCM107 has world smallest size: 100 x 50mm
Tubes board NCT318 size: 264 x 50mm
Tubes board NCT818 size: 94 x 50mm
Actual photos of the DIY KIT:
Tubes board NCT318
Tubes board NCT818
BARE PCB Tubes board NCT318
top side:
Bottom side:
Bare tubes board NCT818 (top)
Bare tubes board NCT818 (bottom)
Boards Dimensions in 2D and 3D
MCU board NCM107 PCB Top view
MCU board NCM107 PCB Bottom
Tubes board NCT318 in 3D
Tubes board NCT818
Dimensions of NCM107 in 2D
Dimensions of NCT318 board
Tubes board NCT818
Example of using this boards:
MCU board NCM107 with NCT318
MCU board NCM107 + NCT318 with glass columns (sold separately)
MCU board NCM107 and NCT318 with additional NCT818 board
See our video presentation of Large Nixie Clock IN-18 by GRA & AFCH
Operating instruction
Shipping and Return information
All Items are shipped from Ukraine Via International registered Airmail Shipments are made within 1 business day After the payments are received and verified It takes about 4-7 days via UPS Express delivery It takes about 10-18 days via Standard shipping It takes about 35-45 days via Economy shipping We combine multiple Items to save on shipping
UPS Express Shipping time (recommended):
Europe:
3-5 days
Germany:
3-5 days
USA, Canada:
4-7 days
Asia, South America:
5-7 days
Australia, New Zealand:
5-7 days
Africa, Central America:
5-7 days
Standard Shipping time:
Europe:
10-12 days
Germany:
10-12 days
USA, Canada:
10-15 days
Asia, South America:
10-18 days
Australia, New Zealand:
12-18 days
Africa, Central America:
12-18 days
Economy Shipping time:
Europe:
25-30 days
Germany:
25-30 days
USA, Canada:
30-35 days
Asia, South America:
35-45 days
Australia, New Zealand:
45-55 days
Africa, Central America:
45-55 days
Return Policy
All Returns are accepted
For Return you should contact Us within 14 Days after receiving the Item
Refunds are made as Money back or Replacements (buyer’s choice)
Return Shipments are paid by the buyer
No restocking fees are charged
Customs Policy
We as a seller do not receive from the buyer any charges any sales taxes and handling fees. In any case we are not responsible for Tax(VAT) or any other Import duties or any other equivalent fees that arises upon delivery. Please consult with your local Customs legislation and visit your local Customs department or website before making any purchases.
Dear customers! If you have ANY questions, PLEASE ASK us