ISQ monitor is an instrument for measuring the stability (ISQ) of dental and craniofacial implants. The instrument measures the resonance frequency of a measurement pin "MulTipeg" and presents it as an ISQ' value. The ISQ value, 1-100, reflects the stability of the implant - the higher the value, the more stable the implant.The instrument measures the ISQ-value with a precision of +/- 1 ISQ unit. When mounted onto an implant, the MulTipeg resonance frequency can vary up to 2 ISQ units depending on the tightening torque.

Product Parameter

Power input: 5VDC, 1 VA

Charger input :100-240VAC, SVA

Instrument weight :100g

Charger safety: class EN 60601-1 Class II

Instrument safety: class EN 60601-1 ME Class ll

EMC EN 60601-1-2, class B

Ambient temperature 16 to 40 c (60-104 F)

Relative humidity 10% to 80% Rh, non-condensing

Product feature and application

1.Higher efficiency, easier operation

2.Better appearance, easier storage

3.Less noise, less interference

4.Measurements are more precise, especially for low stability measurements

 

 

--------------------------------------------------------------------------------------------

 

Model: LED Implant Motor with 20:1 Contra Angle

Key Feature:

60N/cm Torque brush-less electric motor 

Low noise and low vibration

Motor speed is 200-40,000rpm

Large display quickly identifies selected operating procedures

10 kinds of program memory functions

High temperature and high pressure sterilizable electric motor

Newly designed foot pedals that comply with IPX2 international 

Waterproof standard to control speed, program, water supply and speed direction

 

 

Technical Specification:

Model	Surgical Pro
Input Power Supply	AC100-110V or AC220-240V 50/60HZ
Motor Rotation Speed Range	200-40,000rpm
Torque Range	60N.cm
Coolant Flow	0-80ml/min
Stored Programs	8 types

 

Control Unit:

Input power	AC 220V 50HZ
Consumption power	120VA
Water pump output	0ml/min-120ml/min
Fuse	F3AL 250V
Size	285*265*155mm

 

Motor:

Rotary speed	300r/min -5000r/min
input voltage	DC30V

 

Operation Conditions:

Storage Condition: Temperature: -10℃-50℃

Humidity: <80%

Atmospheric pressure: 50KPa-106Kpa

Environment Conditions: Not near from fire equipment or flammability material. 

 

Accessories:

Control unit	1
Foot pedal	1
Power cable	1
Motor (with cable)	1
Water bottle	1
Motor bracket	1
Pipeline snap ring	8
Y type shunt tube	1
Internal channel nozzle	1
Fuse	1
Steam plug	1
Water supply pipe	1
Bending head nozzle	1
Instructions for use

 

 

 

 

 

 

---

Important Notice For U.S.A Buyer

The following FDA Disclaimer is required for all eBay listing in healthcare category:
The sale of this item may be subject to regulation by the U.S. Food & Drug Administration and state and local regulatory agencies.You can bid on this item if you are an authorized purchaser. If the item is subject to FDA regulation, We will verify your status as an authorized purchaser of this item before shipping of the item.If you have questions about legal obligations regarding sales of medical devices, you should consult with the FDA's Center for Devices and Radiological Health.
(This dental items is not meant to replace your doctor diagnostic. It is mainly for your piece of mind and comfort.)